Clean Burn - Model CTB-500 - Waste Oil Boiler
From Waste Oil Boilers
The Clean Burn Model CTB-500 waste oil boiler has an input rating of 500,000 BTU/hr and an output rating of 372,000 BTU/hr. The CTB-500 is UL listed for use in central heating systems. It can be used in combination with any Clean Burn boiler to create a system perfectly sized for any facility. The CTB-500 is the largest of it’s product line. You spend 30 minutes cleaning every 1000 hours of operation. It is uniquely designed for installation flexibility. Engineered for use as a single boiler unit, or as part of a combination of CTB-500 boilers working as a larger system.
-
Most popular related searches
Features
- Three-pass heat exchanger creates more heat efficiency
- Low-mass water design provides quick start -up
- Patented burner engineered exclusively for waste oil
- System is pre-wired, ready for installation
- Narrow cabinet designs provide installation flexibility
- Unequaled service and support from Clean Burn Distributors
Technical Specifications
MODEL CTB-500: SPECS.
- BTU/hour input: 500,000 / 146.5 kW
- BTU/hour output: 372,000 / 109.0 kW
- Fuels:
- Used oils: Crankcase,ATF, hydraulic
- Fuel oils: #2, #4, and #5 fuel oil
- Heating Surface: 97 sq. ft. / 9.0 sqM
- Boiler water volume: 20.6 gal. / 78 L
- Design water flow per coil: 37 gpm / 140 lpm
- Cabinet dimensions:
- 66.38″ L x 40″ W x 42″ H
- 169cm x 102cm x 107cm
- Overall dimensions (with burner/breach/plumbing):
- 86.13″ L x 43.5″ W x 47.85″ H
- 219cm x 111cm x 122cm
- Approx. Weight: 1600 lbs. / 725.7 kg
- Electrical Requirements: 115 VAC 60 Hz single phase* *230V/ 50Hz units also available
- Maximum oil consumption: 3.57 GPH / 13.5 lph
- Stack size: 10″ / 25cm
- Air compressor required: 2.5 CFM @ 25 PSI
- 4.25 m3/h @ 1.7 bar
- Recommended clean-out: 1000 hours
- *Values indicated above are nominal. Actual values will vary depending on fuel and installation.
Customer reviews
No reviews were found for Clean Burn - Model CTB-500 - Waste Oil Boiler. Be the first to review!