Clean Burn - Model CTB-200 - Waste Oil Boiler
From International Models - Multi-Oil Boilers
The Clean Burn Model CTB-200 waste oil boiler has an input rating of 200,000 BTU/hr and outputs 148,400 BTU/hr. The CTB-200 is UL listed for use in central heating systems. With CTB-200, you spend 30 minutes cleaning every 750 hours of operation. It is uniquely designed for installation flexibility. Engineered for use as a single boiler unit, or it can be used in combination with any Clean Burn boiler to create a system perfectly sized for any facility.
-
Most popular related searches
Features
- Three-pass heat exchanger creates more heat efficiency
- Low-mass water design provides quick start -up
- Patented burner engineered exclusively for waste oil
- System is pre-wired, ready for installation
- Narrow cabinet designs provide installation flexibility
- Unequaled service and support from Clean Burn Distributors
Technical Specifications
MODEL CTB-200: SPECS.
- BTU/hour input: 200,000 / 58.6 kW
- BTU/hour output: 148,500 / 43.5 kW
- Fuels:
- Used oils: Crankcase,ATF, hydraulic
- Fuel oils: #2, #4, and #5 fuel oil
- Heating Surface: 39 sq. ft. / 3.6 sqM
- Design water flow per coil: 15 gpm / 57 lpm
- Cabinet dimensions: 40″ L x 29″ W x 29.5″ H 101cm x 74cm x 75cm
- Overall dimensions (with burner/breach/plumbing):
- 59″ L x 33.25″ W x 37″ H
- 150cm x 84cm x 94cm
- Approx. Weight: 677 lbs. / 304.7 kg
- Electrical Requirements:
- 115 VAC 60 Hz single phase*
- *230V/ 50Hz units also available
- Maximum oil consumption: 1.4 GPH / 5.3 lph
- Stack size: 8″ / 20cm
- Air compressor required:
- 2.0 CFM @ 25 PSI
- 3.4 m3/h @ 1.7 bar
- Recommended clean-out: 750 hours
- *Values indicated above are nominal. Actual values will vary depending on fuel and installation.
Customer reviews
No reviews were found for Clean Burn - Model CTB-200 - Waste Oil Boiler. Be the first to review!