EDC (electrostatic) - Electrostatic Fine Dust Collector
From Waste Gas Treatment
The Waste Gas Treatment Product and Service Portfolio of DAS includes EDC, an electrostatic dust collector responsible for the treatment of particle-containing or aerosol-containing process waste gases up to 90 m³/h as they accrue, for example, in solar cell manufacturing. The dust collector reduces particle emissions of even the finest particles up to 99.9 %.
-
Most popular related searches
Operating Principle of the EDC Product Line
The waste gases are introduced in a pre-scrubber and following in a tank which is simultaneously storage tank for the scrubbing liquid. The pre-scrubber is equipped with nozzles, which saturate the gas flow with water, and create a turbulent flow. Afterwards, the waste gas is channeled into the electrostatic dust collector tube, where the contained particles are ionized and precipitated in a grounded water film on the water wall. The filtered fine dust is suspended into the scrubber solution. The dust collector is equipped with an automatic self-cleaning mechanism for the emission electrodes. Remaining residual gases meet the strict German standards for air pollution law (TA Luft).
The following equipment options are available for all EDC systems:
- Power Supply: 3 x 400 V/50 Hz or 3 x 208 V/60 Hz
- Pressure controlled fan
- Lye supply system
- Process-Tool-Interface
- Signal Tower
- Drip Pan
- Earthquake Safety Kit
- Monitoring
EDC – Reduction of Fine Dust Emissions at the Point-of-Use
As mentioned above, EDC is an electrostatic dust collector for treatment of particle-containing or aerosol-containing process waste gases up to 90 m³/h as they accrue, for example, in solar cell manufacturing. The dust collector reduces particle emissions of even the finest particles up to 99.9 % and successfully prevents exhaust blockage. It can be used with the most abatement devices and can be equipped with an optional pressure controlled fan and an optional lye supply system. Access for operating and maintenance is from the front and back and operation costs and general safety can be optimized with a process tool interface.
Your Advantages
- Efficient treatment of particle-containing or aerosol-containing waste gas flows
- All solid particles suspended in liquid (no dry dust handling)
- Extremely low particle emission
- High safety standards (all critical parameters are sensor monitored)
- Interface to upstream abatement systems
Technical Data
- Measurements (D × W × H):
- 830 mm × 855 mm × 2100 mm
- Access to maintenance area on front and
- back side
- Waste gas connection: 1 x DN100
- Gas flows: max. 90 m³/h
EDC PLUS – more Reduction of Particle Emissions at the Point-of-Use
EDC PLUS is an electrostatic dust collector for treatment of particle-containing or aerosol-containing process waste gases up to 270 m3/h like how they accrue, for example, in solar cell or flat panel display (FPD/LCD) manufacturing. The dust collector reduces particle emissions of even the finest particle up to 99.9% and successfully prevents exhaust blockage. It can be used with the most abatement devices and can be equipped with an optional pressure controlled fan and an optional lye supply system. Access for operating and maintenance is on front and back and operation costs and general safety can be optimized with a process tool interface.
Your Advantages
- Efficient treatment of particle-containing or aerosol-containing waste gas flows
- All solid particles suspended in liquid (no dry dust handling)
- Extremely low particle emission
- Internal back-up during the cleaning process of the electrodes
- High safety standards (all critical parameters are sensor monitored)
- Interface to upstream abatement systems
Technical Data
- Measurements (D × W × H):1500 mm × 1000 mm × 2100 mm
- Access to maintenance area on front and back side
- Gas entry: DN150
- Gas outlet: DN200
- Gas flows: max. 270 m³/h
Customer reviews
No reviews were found for EDC (electrostatic) - Electrostatic Fine Dust Collector. Be the first to review!