Supercombinata - Model Easy Compact - Line Boring Machine
From Line Boring Machines
The Supercombinata EASY Compact, thanks to its standard equipment, is suitable to perform internal line boring and internal overlay welding within a working range from Ø 42 mm to Ø 250 mm in very small spaces. By means of extra kits, it is suitable to perform external turning, facing of orthogonal planes and creation of circlips grooves. With additional accessories, the Supercombinata can be adapted to many different needs of our customers.
-
Most popular related searches
Technical Data
DIAMETERS
- Boring bar diameter: ø 40 mm x 2200 mm
- Line boring: ø 42 – 250 mm
- External turning: Extra kit
- Internal welding: ø 42 – 250 mm
- Facing of orthogonal planes: Extra kit
ROTATION MOTOR
- AC motor: Single phase
- Power at rated speed: 1800 W
- Output torque at the bar: 290 Nm with 120 rpm
- 1° speed: max 100 rpm (170 Nm)
- 2° speed: max 340 rpm (50 Nm)
FEED MOTOR
- Gear motor: DC
- Power at rated speed: 90 W
- Max speed: 11 rpm
- Feed system: Electromechanical
- Feed: Manual/Automatic
WELDING TECHNOLOGY
- Spiral: Continous with variable step
- Welding machine: Compatible with MIG/MAG wire with EURO connector
LONGITUDINAL STROKE
- Unlimited: With 250 mm pitch
ELECTRONIC CONTROL PANEL
- Voltage: 230 V (50Hz)
- Main switch: Available
- Emergency switch: Available
- Inverter feed: RH/LH
- Inverter rotation: CW/CCW
- Speed regulator: Rotation/Feed
- Electrical absorption: 2000 W
- Control panel 110/120 V: Upon request
DIMENSIONS
- Length: 545 mm
- Width: 220 mm
- Height: 380 mm
- Weight central unit: 34 Kg
Standard Equipments
- Qty 1 - Main unit
- Qty 1 - Boring machine stand
- Qty 1 - Electronical control panel
- Qty 1 - Control panel holder
- Qty 1 - Cable control panel /machine
- Qty 1 - Power cable
- Qty 1 - Boring bar ø 40x2200 mm
- Qty 1 - Boring bar extension 420 mm
- Qty 1 - Pivot
- Qty 1 - Tool holder for boring d. 100-250 mm
- Qty 1 - Special tool holder LH ø 12x40 mm
- Qty 1 - Tool holder LH ø 12x40 mm
- Qty 1 - Tool holder LH ø 12x60 mm
- Qty 1 - Tool holder right RH ø 12x100 mm
- Qty 1 - Box with 10 cutting inserts
- Qty 2 - Main bar support
- Qty 2 - Additional support
- Qty 1 - Telescopic shaft for welding
- Qty 5 - Diffusor extension 35 mm
- Qty 4 - Short gas nozzle
- Qty 4 - Long gas nozzle
- Qty 5 - Short contact tip ø 0.8 mm wire
- Qty 5 - Long contact tip ø 0.8 mm wire
- Qty 1 - O-ring for welding shaft 100x5 mm
- Qty 1 - Centring system for through holes
- Qty 1 - Telescopic gauge up to ø 250 mm
- Qty 1 - Dial gauge
- Qty 1 - Dial gauge support
- Qty 1 - Set of wrenches
- Qty 1 - Screws and bolts