GPE - Model 13110 Series - Proportional-Speed Floating Hydraulic Controller
From Combustion Controls
The Model 13110 Proportional-Speed Floating Hydraulic Controller is designed for applications where a group of controllers are supplied from a separate, but common power supply. The controller has a practical output range of approximately 235 to 45,000 pounds of force at the actuator. Model 13110 accepts pressure, differential pressure or electric signals.
The Series 13100 Hydraulic Controllers are designe...
The Series 13100 Hydraulic Controllers are designed to provide hydraulic control wherever required. These controllers operate on the basic jet pipe principle, whereby a small signal impulse is amplified into a powerful control force.
The signal impulse may be from a pneumatic, mechanical or electrical measuring system which can exert a force on the jet pipe. For control applications of pressure, flow, ratio or other variables the following input signal systems are generally used: diaphragm, bellows, Bourdon tube or moving coil. These signal systems provide the force that moves the jet pipe, causing it to unbalance the flow of oil in the two receiving orifices. The signal force is balanced either by a calibrated spring with set point adjustment or by feedback from a secondary system.
These controllers have a practical output range or approximately 235 to 45,000 pounds of force at the actuator.
Standard Body Hydraulic Controllers
The Series 13100 Standard Body Hydraulic Controllers are supplied from a separate hydraulic power supply and generally are grouped with a number of controllers using a common power supply. Designed for easy mounting on tables, panels or cubicles.
To provide maximum speed and high output power, these controllers are available with a 1.2 mm, 2.0 mm or 2.5 mm jet pipe. In addition, a 3/8' or 3/4' booster can be added to increase the power capacity and provide stable control.
The Series 13100 Hydraulic Controllers are available in many models to provide applications for Furnace Pressure Control, Combustion Control, Suction/Discharge Pressure Control, Gas Mixing, Blowers and Pump Control.
The Controller capacity is determined from the pressure and flow rate requirements of the total hydraulic system. Also, piping, elevation, type of actuator and valves must be considered.
Capacity Option
- 1.2 mm Jet pipe
- 2.0 mm Jet Pipe
- 2.5 mm Jet Pipe
- 3/8 inch Booster
- 3/4 inch Booster
Switching Operation
- Transfer Valve
- Shutoff Valve
- Manual/ Automatic Valve
- General Purpose Solenoids
- Explosion Proof Solenoids
Customer reviews
No reviews were found for GPE - Model 13110 Series - Proportional-Speed Floating Hydraulic Controller. Be the first to review!