F&J - Model DF-14MHTE - Heavy Duty Mobile Low Volume Air Sampler (200 - 240VAC)
From Air Samplers - Low Volume Air Samplers - Digital Flow Meter (DFM) Low Volume Product Lines
The Model DF-14MHTE heavy duty hand truck mounted mobile low volume air sampler with digital flowmeter and an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model DF-14MHTE contains state of the art microprocessor electronics, which provides for corrected flow rate measurements, volume totalizations, and an RS232 communications port. It has a large bright LED display.
-
Most popular related searches
Product Details
The DF-14MHTE Air Sampler includes an oil-less, carbon vane vacuum pump with a constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a minimum pressure drop at all times, permitting it to run cooler, thus extending its lifetime. The oil-less pump requires no lubrication to maintain optimal efficiency during its service life. The pump is mounted on a rugged hand truck with two 11” diameter pneumatic tires to facilitate mobile transportation of the unit.
The typical operating flow range is 0.5 to 4 CFM (14 to 115 LPM)
Specifications
- PUMP TYPE: Oil-less, carbon vane 1/4 HP, 1725 RPM @ 60 Hz
- MAXIMUM CAPACITY: 4 CFM (115 LPM) at 0” Hg Pressure drop
- ULTIMATE VACUUM: 25” (635 mm) Hg at sea level
- POWER REQUIREMENTS: 220 – 240VAC, 50/60 Hz; 6 amperes; single phase
- CIRCUIT BREAKER PROTECTION: 10 amperes
- ELECTRICAL CORD: All temperature, 3 wire, 14 gauge
- THERMAL OVERLOAD PROTECTION: Furnished as an integral part of the motor
- CONSTANT AIRFLOW REGULATOR: Aluminum construction with silicone diaphragm; adjustable from 0.5 to 4 CFM (10-115 LPM)
- DIMENSIONS: 21”L ×19”W ×55”H (53×48×140 cm)
- SAMPLING GOOSENECK: Adjustable to 7’ (213 cm) sturdy aluminum
- WHEELS: 11” D pneumatic tires
- WEIGHT: 67 lbs. (30,5 kg)
- INSTALLATION CATEGORY: Pollution Degree 2
- OPERATING TEMPERATURE RANGE: 32º-104ºF (0º-40ºC)
Electronic Specifications
- MEASUREMENT ACCURACY:
- Air flow: +/- 4% of full scale
- Temperature: +/- 2.0ºF (1.1ºC)
- Barometric Pressure: 2% over measured range
- CALIBRATION: Calibration verification 1 per year
- COMMUNICATIONS INTERFACE:RS-232
- ON-BOARD CALCULATIONS:
- Flow calculation from differential pressure value using best-fit curve method
- Flow correction for standard temperature and pressure
- Auto-zero correction utilizing electro-pneumatic method to
- compensate for offset and drift (automatic, once every minute)
Options
- Data Storage Device (P/N: 232FCDSD)
- 2 GB Secure Digital Card (P/N: 372239)
- Flash card Reader (P/N: SDDR-199-A20)
COMBINATION FILTER HOLDER: Durable plastic combination filter holders for F&J Model B, C or M charcoal cartridges and 47 mm, 2” or 50 mm diameter particulate filter paper are available. All models have quick-disconnect function.
Customer reviews
No reviews were found for F&J - Model DF-14MHTE - Heavy Duty Mobile Low Volume Air Sampler (200 - 240VAC). Be the first to review!