air assisted flare equipment available in Europe

  • Premium

    AEREON - Air-Assist Flares

    Air assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste gas stream, improving ...

    By AEREON based in Austin, TEXAS (USA). from Air-Assist Flares Product line

  • Premium

    AEREON - Air-Assist Flares for the Shale Play

    Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste gas stream, improving ...

    By AEREON based in Austin, TEXAS (USA). from Air-Assist Flares for the Shale Play Product line

  • UOP Callidus - Air Assisted Flare

    The air assisted flare represents an effective alternative to traditional, steam-assisted smokeless flares. Significant advantages of the air-assisted design is a dramatic reduction in maintenance of the flare tip and lower operating costs.The continual flow of forced draft air cools the tip and prevents flame pull down in high wind conditions.

    By Callidus Technologies - part of UOP, a Honeywell Company based in Tulsa, OKLAHOMA (USA). from Air Assisted Flare Product line

  • Air Assisted Flares

    Air assisted flares enable the smokeless combustion of low pressure waste gases. Air (or Gas) assisted flares can be used when no steam is available on site. Air assisted flares use forced draft Air or Gas to create turbulence ensuring that sufficient primary combustion air is supplied to the flame. The amount of air and hence the size of the tip ...

    By Europem N.V based in Lier, BELGIUM. from Air Assisted Flares Product line

  • Premium

    AEREON - Steam Assisted Flares

    Steam assisted flares are flares designed to dispose of heavier hydrocarbon gases which have a tendency to smoke. In order to prevent smoke formation, steam is injected into the waste stream using peripheral steam rings, center stream spargers and/or inner induction tubes. Steam flares are used in applications where high pressure steam is ...

    By AEREON based in Austin, TEXAS (USA). from Steam Assisted Flares Product line

  • CAF Air Assisted Flares

    Where there is a need for smokeless combustion of low pressure, heavy waste gases but no steam is available then GBA Flare Systems CAF air assist flares can be used. CAF air assist flares use forced draft air to create turbulence and to supply the requisite primary air into the base of the flame thus achieving a clean, upright flame. For CAF air ...

    By GBA Flare Systems based in Burnham, UNITED KINGDOM.

  • Premium

    AEREON - Gas-Assist Flares for the Shale Play

    Gas-assisted flares are flares that use an additional source of fast-moving gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. Typically utilized when you have a readily available source of natural gas, and a preference to not use a ...

    By AEREON based in Austin, TEXAS (USA). from Gas-Assist Flares for the Shale Play Product line

  • Premium

    AEREON - Utility Flares

    Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium. Utility flares therefore, do not require auxiliary gas streams such as steam or air; two ...

    By AEREON based in Austin, TEXAS (USA). from Utility Flares Product line

  • Premium

    AEREON - Flame Ring Flares

    Carbon dioxide is often used in fire extinguishers and snuffing systems with the intention of effectively extinguishing flames. When CO2 gas is a large percentage of a waste gas stream, at times it proves difficult to maintain a lit flare without the use of assist gas or a properly designed flame ring. Flare Industries’ industry-proven Flame ...

    By AEREON based in Austin, TEXAS (USA). from Flame Ring Flares Product line

  • Premium

    AEREON - Utility Flares for the Shale Play

    Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium. Utility flares therefore, do not require auxiliary gas streams such as steam or air; two ...

    By AEREON based in Austin, TEXAS (USA). from Utility Flares for the Shale Play Product line

  • Premium

    AEREON - Model Mach-1 - Fixed Orifice Sonic Flares

    Mach-1 sonic flares are used in both onshore and offshore applications to dispose of high pressure waste gas streams with high smokeless capacities. By efficiently inducing high volumes of ambient air for more complete, smokeless combustion at sonic velocities, this advanced flaring technology allows for reduced levels of radiation and can be ...

    By AEREON based in Austin, TEXAS (USA). from Fixed Orifice Sonic Flares Product line

  • Premium

    AEREON - Model MPGF - Multi-Point Ground Flare Systems

    When real estate is available, multi-point ground flare (MPGF) systems are an economical approach to smokeless combustion of large amounts of process gas. By inducing air to a large array of high-pressure burning points, smokeless combustion can be achieved with high turndown, while concealing all radiation within walls. MPGF systems provide ...

    By AEREON based in Austin, TEXAS (USA). from Multi-Point Ground Flare Systems Product line

  • Premium

    Sentinel Small Well Pad Flare

    Developed specifically to address the needs of smaller well-pad sites, the Sentinel VariMach Flare provides high throughput in a small package, maintaining smokeless combustion at all flows without the need for assist air or gas. It meets all Quad O and 40 CFR 60.18 requirements, and comes standard in a tandem LP/HP configuaration with a fixed ...

    By AEREON based in Austin, TEXAS (USA). from Sentinel Small Well Pad Flare Product line

  • Utility Flares

    Utility Flares (Pipe Flares) are the most basic flare design available, to provide a robust, reliable and flexible solution for the flaring of large volumes of low pressure waste gas when smokeless operation is either not required or can be achieved without an assisting medium (like steam, air or gas). Reliable operation at both full load and ...

    By Europem N.V based in Lier, BELGIUM. from Utility Flares Product line

  • EPG - Model LTL - Biogas Flares

    LTL Biogas Flares are widely used for odor and emission control when vacuum assist is required, such as cap vents, leachate stations, or from gas outbreaks at the surface of active or closed landfill cells. These units are ruggedly constructed for long life and feature solar-powered continuous ignition with very low maintenance requirements. Skid ...

    By EPG Companies Inc. based in Maple Grove, MINNESOTA (USA). from Biogas Flares Product line

  • ITAS - Demountable Flares

    Demountable flares are used when locating several flares in a limited available plot plan is critical, while limiting plant shut-down costs for maintenance. From design, engineering, fabrication, supervision and training, Fives offers up to 200 meters demountable flares systems.

    By Fives I.T.A.S. s.p.a. based in Monza, ITALY.

  • Tornado - Flare Systems

    A flare stack refers to an elevated vertical stack used for burning off unusable waste gas in a variety of oil and gas production applications. Waste gases are either uneconomical to recover/retain, or released during planned or unplanned over-pressuring of plant equipment. Waste gases are released to the flare via piping (flare header) and burned ...

    By Tornado Combustion Technologies based in MD of Rocky View, ALBERTA (CANADA). from Flare Systems Product line

  • Combustion Research Associates - Sonic Utility Flares

    Utility Flares are the simplest and most economical type of flaring systems that work well in applications that don't require smokeless burning or where smokeless burning is attained without assistance from air, steam or gas. We also manufacture low flow flares and sonic flares with high-pressure tips to reduce emissions and provide cost effective ...

    By Combustion Research Associates based in Noida (New Delhi-NCR), INDIA.

  • Enclosed Ground Flare

    Enclosed Flares (VCUs) designed and manufactured by Combustion Research Associates offer smokeless flaring of various pollutants such as Hydrocarbon gases and vapors, Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs). With a concealed flare, these stacks pass stringent regulations against visible emissions, vapor radiation, ...

    By Combustion Research Associates based in Noida (New Delhi-NCR), INDIA.

  • Open/Elevated Flare System

    MRW Designs and manufactures the following elevated flare systems for all sizes and compositions of waste gas.

    By MRW Technologies, Inc. based in Glenpool, OKLAHOMA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you