Air Assisted Flare Equipment
-
Manufactured by ASHCORbased in USA
The ASHCOR Air Assist Flare is made of a stainless steel body and is designed to withstand heavy wind and other stringent oil and gas environment conditions. Our standard Air Assist Flare can be built up to 40 feet and is Quad O and 40 CFR 60.18 compliant with a near infinite turn down. The ...
-
Manufactured by MRW Technologies, Inc.based in USA
An effective method for achieving smokeless flare operation is to use an air-assisted flare where forced air is mixed with the waste gas. MRW has air-assisted flares operating successfully at loading terminals, landfills, ethanol plants, chemical & ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Cyclone Series Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to eventually combine with the process gas, which passes through its own ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
The air assisted flare represents an effective alternative to traditional, steam-assisted smokeless flares. Significant advantages of the air-assisted design is a dramatic reduction in maintenance of the flare tip and lower operating costs.The continual flow of ...
-
Manufactured by Europem N.Vbased in BELGIUM
Air assisted flares enable the smokeless combustion of low pressure waste gases. Air (or Gas) assisted flares can be used when no steam is available on site. Air assisted flares use forced draft Air or Gas to create turbulence ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Air assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the ...
-
Distributed by GBA Flare Systemsbased in UNITED KINGDOM
Where there is a need for smokeless combustion of low pressure, heavy waste gases but no steam is available then GBA Flare Systems CAF air assist flares can be used. CAF air assist flares use forced draft air to create turbulence and to supply the requisite ...
-
Manufactured by Hero Flare LLCbased in USA
HERO Flare is a leading supplier for providing proven Air Assist technology to achieve smokeless capacities. Low pressure air is an excellent method for smoke free combustion of heavier gas streams. The flare gas and blower air flow coaxially to the flare tip where they mix. The ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The Air-Assisted Smokeless Flare Tip is used for smokeless combustion applications, where the use of steam is not desired. Smokeless combustion can be obtained even with heavy unsaturated hydrocarbon gases. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the ...
-
Manufactured by Hilliard Emission Controls, Inc. / PURGITbased in USA
PURGIT designs and builds stainless steel air-assist and gas-assist mobile flares in several sizes – 2” to 6”. Our flares can be configured with blowers, knock-out drums, and flow meters for a variety of applications and are designed to set up on site in under 30 minutes. This picture shows a ...
-
Manufactured by ACL Combustion Inc.based in USA
separators, line heaters, re-boilers or any other applications where accurate temperature monitoring and/or control is required. The CSC400-FD can be configured to be used on forced draft incinerators, combustors, and air-assisted flare stacks as well. The CSC400-FD provides control for fuel and air ratios for fine tuning. ...
-
Manufactured by Combustion Research Associatesbased in INDIA
Assisted flares are designed to dispose of heavier hydrocarbon gases that have a greater propensity to smoke. Air Assisted flares use blowers to introduce combustion air into the gas stream as it exits the flare tip. A low-pressure blower blows combustion air ...
-
Manufactured by Smitsvonk Holland B.V. - a member of the Durag Groupbased in NETHERLANDS
Ignition of waste gas from pipe flares, air and steam assisted flares and ground flares For most flare systems the pilot burner can not be accessed for service. Maintenance or replacement is not possible while the flare is in operation.To safeguard operation, Smitsvonk's pilots ...
-
Manufactured by Europem N.Vbased in BELGIUM
calorific waste gas. Both air assisted and non-assisted flare burners are ...
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
Demountable flares are used when locating several flares in a limited available plot plan is critical, while limiting plant shut-down costs for maintenance. From design, engineering, fabrication, supervision and training, Fives offers up to 200 meters demountable flares systems. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Pit Flares are generally selected and designed in order to combust a mixture of vapor and liquid from a single source. While most often designed to operate non-smokelessly, through use of Flare Industries’ various Pit Flare technologies, smokeless operation can often be achieved. The flare pit (or “Burn Pit”) is ...
-
Manufactured by Hilliard Emission Controls, Inc. / PURGITbased in USA
PURGIT operates a turn-key mobile flare service for sites all over the United States. Both enclosed combustors and open flares are kept in stock and ready to deploy for applications ranging from above-ground storage tank degassing to truck and railcar loading/cleaning events. Our project coordinators have over five decades of experience and ...
-
Manufactured by Hero Flare LLCbased in USA
When steam or electric is not available on-site, our high pressure gas assist or air assist technologies are viable options to achieve smokeless capacity. This technology can also be used to retrofit an existing flare stack that is experiencing smoke formation and outside of the environmental compliance ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The Demountable Flare System features a derrick structure with the one or multiple flare risers, mounted in such a way as to permit the lowering of the flare burner to grade for service without the need for an expensive heavy-duty crane. Further the flare burner is lowered to grade without the need of any personnel to climb to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you