Air To Air Heat Exchanger Equipment
-
Manufactured by Thermal Edge Inc.based in USA
Deep Series 33 W/°C air to air heat exchangers for 12″ deep ...
-
Manufactured by KELVION INC. / PHEbased in USA
- in this case meaning preheating fresh air by the exhaust air. The Kelvion AirToAir heat exchangers are the first choice for this purpose. That's how it works: Warm air from the process flows around thinwalled plain tubes, cools down and condenses if necessary. Cold fresh air flows inside the ...
-
Manufactured by Thermal Edge Inc.based in USA
Compact Series 11 W/°C air to air heat exchangers for 12″ deep ...
-
Manufactured by Himenviro Environmental Technologies Private Limitedbased in INDIA
An air to air type of Heat Exchanger which has low running cost, easy to clean, easy to maintain and is 100 % reliable for cooling high temperature fine gases. Its design is compact and modular, easy to install and economical to run. Added advantage, is it provides clean hot air, which can be used in the process ...
-
Manufactured by Eclipse, Inc.based in USA
The Exothermics Aluminum Air-to-Air Heat Exchanger is a counter-flow design allowing for two segregated air streams to flow through the parallel plates within the exchanger. These exchangers utilize a state-of-the-art sinusoidal plate-type design for maximum heat ...
-
Manufactured by Air Industrie Thermique España, S.L. (AITESA)based in SPAIN
Allow condensation and/or cooling of the process gas or liquid by means of exchanging heat for air blown by fans. We design optimized processes according to available space, location, metal frame or even in a truck. The design is adapted to customer specifications according to the reference codes API 560, ASME VIII Div.1, TEMA-R. We work ...
-
Manufactured by Pentair - Hoffmanbased in USA
Unique counterflow aluminum core for high efficiency and high performance heat transfer. Models for 24 VDC, 48 VDC, 115 VAC and 230 VAC power supplies. UL Listed or Recognized to save customers time and money with agency approvals. Operating temperature range from -40 F/-40 C to 149 F/65 C. Variable speed blowers standard on DC powered ...
-
Manufactured by RD Grupbased in TURKEY
High resistance to wear all along its life. Conformity to hygienic applications and high dehumifiying performance. Continuous operating between -40 and +60 ˚C . Withstands to 2500 Pa pressure difference. Low risk for cross contamination. High resistance to ice formation. Cross flow and counter cross flow ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
-
Manufactured by Vensys Energy AGbased in GERMANY
Lower repair and maintenance costs through high-quality and durable components. Fully encapsulated generator cooling system with air-to-air heat exchangers. High-quality permanent magnets for a higher energy yield.Low-wear and low-maintenance blade pitch system with toothed belt ...
-
Manufactured by Vensys Energy AGbased in GERMANY
We Dispensing with a gearbox means lower repair and maintenance costs and a higher yield.High-quality permanent magnets pre-vent electrical excitation losses, which additionally increases the energy yield.The generator cooling system with air-to-air heat exchangers is fully en-capsulated, protecting it from salty ...
-
Manufactured by Vensys Energy AGbased in GERMANY
We Dispensing with a gearbox means lower repair and maintenance costs and a higher yield. High-quality permanent magnets pre-vent electrical excitation losses, which additionally increases the energy yield. The generator cooling system with air-to-air heat exchangers is fully en-capsulated, protecting it from salty ...
-
Manufactured by Vensys Energy AGbased in GERMANY
We Dispensing with a gearbox means lower repair and maintenance costs and a higher yield. High-quality permanent magnets pre-vent electrical excitation losses, which additionally increases the energy yield. The generator cooling system with air-to-air heat exchangers is fully en-capsulated, protecting it from salty ...
-
Manufactured by Luhrfilter Limitedbased in UNITED KINGDOM
The Flat Tube Heat Exchanger is an air to air heat exchanger operating on the principle of forced draught convection. Process gases pass over the outside surfaces of the heat exchanger elements. Cooling air is generated from ambient ...
-
Manufactured by AirProtekt Limitedbased in UNITED KINGDOM
to maintain an warm temperature to factory then pulled through an air to air heat exchanger. The heat energy is transferred through the exchanger into the preheat factory space heating air supply. This air is supplied through a new fan inlet and ...
-
Manufactured by Eclipse, Inc.based in USA
Eclipse Cross-Flow Recuperators are compact tubular air-to-air heat exchangers designed to recover the waste heat in industrial exhaust gases. The recovered heat is used to preheat the combustion air for the system’s burners, thereby increasing the thermal efficiency. To ...
-
Manufactured by APPIDI TECHNOLOGIES PVT LTD,based in INDIA
Appidi Energy Recovery Units (ERU) heat recovery is a plate or rotary type air-to-air heat exchange designed to provide maximum energy efficiency in ventilated systems where heated or cooled air is let out and outdoor air is let in. In applications where ...
-
Manufactured by Bry-Air (Asia) Pvt. Ltd.based in INDIA
Bry-Air's BryXchange is an air to air rotary heat exchanger which recovers energy from high temperature exhaust air. Considerable high temperature air is generated in kilns, ovens, furnaces etc. which generally goes waste. Through BryExchange this sensible waste energy can be ...
-
Manufactured by Tezel Isıtma Soğutma Havalandırma Ltd. Şti.based in TURKEY
The TIGK-HP heat pump heat recovery ventilation units are designed to achieve high indoor air quality as well as energy saving. When heat transfer is done with air-to-air heat recovery plate heat exchangers used in TIGK-HP devices, fresh ...
-
Manufactured by Koncar-Generators and Motors Inc.based in CROATIA
This catalogue contains description and basic technical data of three-phase high-voltage slipring induction motors with air - air heat ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you