Alternative Energy equipment in France

  • Model E - Cold Storage Cooler

    The E-Cooler is a highly efficient fluid (aquaeous suspension of PCM, ready to use) to store and easily carry thermal energy in air-conditioning and industrial refrigeration systems. Unlike the current and traditional accumulation alternatives (ice tank and ice slurry), the E-Cooler allows to collect and provide any level of temperature between ...

    By Clauger based in Brignais, FRANCE. from Industrial Refrigeration- Energy Storage Product line

  • Jenoptik - Efficient Electrical Power Supply System

    The energy systems meet high technological standards and norms — from individual components to complete units. Jenoptik plans, develops and constructs electrical energy systems from units through to essential components in power trains. The systems are dedicated for use especially for railway and commercial vehicles. We focus on your ...

    By JENOPTIK AG Office in Saint Martin des Entrées, FRANCE. from Energy Systems and Drive Technologies Product line

  • High Energy Disc Systems

    Centrifugal disc finishing for increased efficiency. High-energy disc machines offer an efficient alternative to conventional vibratory machines, providing performance levels of up to 10 to 30 times higher than conventional vibratory equipment. Our wide range of machine sizes and varying levels of automation, offer  solutions to any kind of ...

    By Rösler Oberflächentechnik GmbH Office in St. Clément, FRANCE. from Vibratory Finishing Product line

  • Turnkey Plants for Energy Recovery from Waste

    CNIM provides turnkey waste-to-energy conversion plants, for use either by local authorities or designated operators. The plants are able to turn this waste into electricity, heating for urban areas, or steam for industrial processes and air conditioning, among other applications. CNIM guarantees the energy performance of its equipment, which ...

  • Fueltron - Combustion Enhancement Process

    In 2010 Fluid Dynamics developed the Fueltron combustion enhancer following several requests from our clients to develop a system that can increase the combustion efficiency of fuel and reduce associated combustion gasses. Following development of the Fueltron it was trialled at a number of companies around the world to prove its effectiveness. ...

    By Fluid Dynamics International Ltd Distributor in FRANCE. from Energy Saving Product line

  • Premium

    Biogas from Food Waste Cogeneration / CHP

    Disposal and treatment of biological waste represent a major challenge for the waste industry. For a wide range of organic substances from agriculture, foodstuff of feed industries, anaerobic digestion is a superior alternative to composting. Biogas – a mixture of both methane and carbon dioxide – is created during anaerobic digestion ...

    By Clarke Energy Office in Bouc Bel Air, FRANCE. from Biological Gases Product line

  • Premium

    Electricity from Gas-Powered Generators

    Through on-going investment in research and development GE's gas engines remain market leaders in the gas engine field. The engines are highly efficient at the conversion of the energy within gas into useful electrical power. In the event that there is a local use for hea

    By Clarke Energy Office in Bouc Bel Air, FRANCE. from Power Product line

  • EcoSkid - Cooling /Heating Systems

    With the EcoSkid, the latest addition to our high energy efficiency Skids product range, Clauger aims at developing environmentally friendly equipment that is versatile and that has low energy consumption rates, in order to respond to the needs of the manufacturers.

    By Clauger based in Brignais, FRANCE. from Industrial Refrigeration- Cooling /Heating Systems Product line

  • Biofuels (Biomass)

    With the help of their unique biodrying process, Biogénie supplies institutional and industrial clients with an urban-generated biomass that is a cost-efficient alternative to some biofuels. Boilers that run on natural gas or oil can now be converted to create energy from biomass, a renewable resource. This allows organic matter to return ...

    By Biogenie, a division of EnGlobe corp. Office in Echarcon, FRANCE.

  • Premium

    GE Jenbacher - Diesel Genset

    A GE's Jenbacher genset is configured to produce electrical power only, which the Jenbacher unit does at high efficiency. When a unit is in a genset configuration the engine, alternator and other supporting items are located on a skid. Waste heat from the engine would be dissipated in the exhaust gas and via an engine cooling circuit ...

    By Clarke Energy Office in Bouc Bel Air, FRANCE. from Engine - Jenbacher Gas Engine Configurations Product line

  • Biomass Boilers

    LAB solutions for flue gas treatment on biomass boilers are many and varied, depending on the fuel type for which the installation is designed. Biomass is well known as a renewable and abundant energy source and is more and more used as an alternative to fossil fuels. It uses different sustainable fuel like: domestic wood, wood-chips, bagass, ...

    By LAB SA based in LYON CEDEX 07, FRANCE. from Power Plant Product line

  • Premium

    GE - Cogeneration Module Configuration

    A GE Jenbacher gas engine module is configured for the recovery of both electricity and heat via a cogeneration / CHP configuration. As with the 

    By Clarke Energy Office in Bouc Bel Air, FRANCE. from Engine - Jenbacher Gas Engine Configurations Product line

  • Premium

    Cogeneration / Combined Heat & Power Systems (CHP)

    Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national ...

    By Clarke Energy Office in Bouc Bel Air, FRANCE. from Power Product line

  • Interpane - Model IPASOL - High-end Solar Control Glass

    Modern glass architecture places very high technical and aesthetic demands on the materials. The technical requirements for solar control glazing in sophisticated buildings include a low total energy transmittance, excellent thermal insulation and the highest possible transparency. Today, visual qualities regarding colour and reflectivity are also ...

    By Interpane Glas Industrie AG Office in Hoerdt, FRANCE. from Solar Control Product line

  • Premium

    GE - High Ambient Temperature Enclosure & the ‘Cookie Cutter’ Concept

    Clarke Energy recognised the requirements for a ‘power module’ based around the GE Jenbacher Type-6 engine. The power module scope which comprises of 

    By Clarke Energy Office in Bouc Bel Air, FRANCE. from Engine - Jenbacher Gas Engine Configurations Product line

  • Model P series - SolarMax

    Maximum pay-back: Specifically for private roof-mounted systems up to 6 kWp, SolarMax offers string inverters. With efficiencies of up to 98%, as well as maximum reliability and simplicity, they provide the plant operator with maximum energy yields. Installers will be enthusiastic about the P series on the basis of its ease of use during planning ...

    By Solar Max Office in Saint Priest, FRANCE. from String Inverters Product line

  • Premium

    Absorption Chillers

    Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide.

    By Clarke Energy Office in Bouc Bel Air, FRANCE. from Waste Heat Recovery for Ancillary Equipment Product line

  • Soltronic - Model MPPT 7520 - Charge Controller

    The Soltronic MPPT 7520 Solar Battery Charger Unit with MPP technology is a highly developed MPPT solar charger unit for photovoltaic systems and is used to charge batteries. The unit has an intelligent MPP algorithm maximising the energy generation of solar power generators. With an individually programmable digital output, a dangerous total ...

    By Soltronic Office in Lodève, FRANCE.

  • METAMOD - Methanation Unit

    ATMOSTAT designs and manufactures a methanation unit named METHAMOD based on its very compact exchangers reactors technology.

    By Atmostat based in Villejuif Cedex, FRANCE.

  • Model 31 - Shock Absorbers

    Type 31 shock absorbers are specially designed to deal with large loads. They are mainly used in nuclear power stations to protect steam generators and large pumps. Due to the restricted space in such areas, their dimensions are generally designed to suit the given conditions.

    By Lisega SE Office in Bondoufle, FRANCE. from Dynamic Components Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you