Ash Handling Equipment In USA
-
Manufactured by Ducon Technologies Inc.based in USA
Ducon supplies both wet and dry type ash systems for power plants. Wet ash system is can be utilized for Bottom Ash handling with water impounded hopper and jet pumps for intermittent removal.Ash collected in economiser, primary air heater and secondary air heater hoppers drops continuously through suitable vertical pipe ...
-
Manufactured by Richmond Engineering Worksbased in USA
Fly ash is one kind of waste produced by coal-fired power plants. Pollution control equipment used in coal combustion captures fly ash from the chimneys of coal plants. Fly ash and bottom ash that are removed from the base of coal furnaces are often referred to simply as bottom ash. Richmond Engineering Works has ...
-
Manufactured by Magaldi Power S.p.A.based in ITALY
The Magaldi Ecobelt® WA is the ideal steel conveyor belt for dry extraction, cooling and handling of bottom ash produced by waste incinerators. According to boiler lay-out and restrictions, the same equipment can also be used to convey grate ...
-
Manufactured by EPA Technologies LLCbased in USA
Provides 2.0 MMBtu/hr combustion capacity: 210-320 lb/hr (95-145 kg/hr) of average HHV of 5000-8500 Btu/lb wastes. Batch Operation: 2.6 yd3 (2 m3) per 4-6 hr. batch / Intermittent Feed: 1.25 yd3/hr (.95 m3/hr) up to 8 ...
-
Manufactured by EPA Technologies LLCbased in USA
Provides 1.0 MMBtu/hr combustion capacity: 140-200 lb/hr (64-90 kg/hr) of average HHV of 5000-8500 Btu/lb wastes. Batch Operation: 1.95 yd3 (1.5 m3) per 4-6 hr. batch / Intermittent Feed: .73 yd3/hr (.56 m3/hr) up to 8 ...
-
Manufactured by EPA Technologies LLCbased in USA
Provides 1.5 MMBtu/hr combustion capacity: 175-200 lb/hr (80-115 kg/hr) of average HHV of 5000-8500 Btu/lb wastes. Batch Operation: 2.4 yd3 (1.8 m3) per 4-6 hr. batch / Intermittent Feed: 1 yd3/hr (.77 m3/hr) up to 8 ...
-
Manufactured by Magaldi Power S.p.A.based in ITALY
The MAC® (Magaldi Ash Cooler) is a unique system for dry extraction, air cooling and mechanical handling of bottom ash from pulverized coal-fired boilers. With hundreds of installations worldwide since the 1980’s, the MAC® is the world’s leading dry bottom ash handling system for utility and ...
-
Manufactured by EPA Technologies LLCbased in USA
Provides .3 MMBtu/hr combustion capacity: 30-50 lb/hr (14-23 kg/hr) of average HHV of 5000-8500 Btu/lb wastes. Batch Only Operation: 9-10 ft3 (208 L) per 4-6 hr. (Ships skid mounted & fully ...
-
Manufactured by EPA Technologies LLCbased in USA
Provides .5 MMBtu/hr combustion capacity: 55-85 lb/hr (25-39 kg/hr) of average HHV of 5000-8500 Btu/lb wastes. Batch Operation: .75 yd3 (.55 m3) per 4-6 hr. batch / Intermittent Feed: .5 yd3/hr (.38 m3/hr) up to 8 ...
-
based in USA
This spade is based upon the same design as our standard shrubbery spade. Designed with a long Ash handle to allow you more leverage when digging without the need to bend so much. Made with a solid forged head for strength the narrow blade design is ideal for working between shrubs on a border area. (Clarington Forge/Robert ...
-
Manufactured by General Kinematicsbased in USA
Balanced design, rugged construction, and sophisticated engineering features keep General Kinematics SYNCRO-COIL vibratory conveyors operating around the clock, day after day, under the highly adverse conditions in ash handling ...
-
Manufactured by United Conveyor Corporation (UCC)based in USA
EXCEN-CRUSHER® Clinker Grinders are specifically designed for both wet and dry bottom ash applications, offering superior performance and high-level reliability. With decades of proven experience, UCC clinker grinders effectively reduce material size providing higher efficiency in pneumatic, hydraulic and mechanical bottom ash handling ...
-
Manufactured by United Conveyor Corporation (UCC)based in USA
and mechanical bottom ash handling ...
-
Manufactured by United Conveyor Corporation (UCC)based in USA
EXCEN-CRUSHER® Clinker Grinders are specifically designed for both wet and dry bottom ash applications, offering superior performance and high-level reliability. With decades of proven experience, UCC clinker grinders effectively reduce material size providing higher efficiency in pneumatic, hydraulic and mechanical bottom ash ...
-
Manufactured by Vibra-Pro Company, Inc.based in USA
High Temperature Processing units handling Hot Ash from ...
-
Manufactured by United Conveyor Corporation (UCC)based in USA
EXCEN-CRUSHER® Clinker Grinders are specifically designed for both wet and dry bottom ash applications, offering superior performance and high-level reliability. With decades of proven experience, UCC clinker grinders effectively reduce material size providing higher efficiency in pneumatic, hydraulic and mechanical bottom ash ...
-
Manufactured by United Conveyor Corporation (UCC)based in USA
EXCEN-CRUSHER Clinker Grinders are specifically designed for both wet and dry bottom ash applications, offering superior performance and high-level reliability. With decades of proven experience, UCC clinker grinders effectively reduce material size providing higher efficiency in pneumatic, hydraulic and mechanical bottom ash handling ...
-
Manufactured by United Conveyor Corporation (UCC)based in USA
UCC EXCEN-CRUSHER Clinker Grinders are designed to handle the broadest possible range of friable materials. These robust clinker grinders incorporate a host of design features that improve efficiency and reliability in bottom ash handling systems. Crushing can be accomplished in either wet or dry environments with pneumatic, ...
-
Manufactured by Vulcan Drying Systemsbased in USA
Drying Systems are designed specifically to dry fly ash, making the material easy to transport, store and handle. Fly ash is fed into the rotary dryer. After passing through the dryer, the dried material is discharged to a transfer conveyor for further sorting, separation, or storage. The vapor from the process is pulled through a which ...
-
Manufactured by BCR Environmental Corporationbased in USA
Lower Operational Cost, Longer Up-Time, Rapid Replacement of Wear Components; With over 50 years of experience and know how, we understand how to build ash coolers that out last anything else on the market. Our proprietary hard surfacing and tile overlays insure maximum life and operational uptime. The extreme temperatures and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you