ash level measurement Equipment

Entech - Ash Tracker

For more than a decade, coal-fired power utility stations across the US have relied on our patented MAPS 20/20® imaging system for reliable bottom ash measurement and control.

By Entech Design, Inc. based in Denton, TEXAS (USA). from Ash Tracker Product line

Cineris - Unburned Carbon Online Measurement System

The amount of unburned carbon (UBC) in fly ash is a good marker of efficiency of coal blends combustion. The presence of unburned carbon is, in fact, a consequence of incomplete combustion which originates from the devolatilisation of the coal fed to the boiler. Thus, determination of the carbon content in the fly ash can provide useful ...

By Loccioni Group based in Angeli di Rosora (AN), ITALY. from Unburned Carbon Online Measurement System Product line

ULMA - Model Lambda 20KW - Compact and Flexible Pellet Boiler

The Ulma-Lambda boiler is a compact and flexible boiler equipped with a standard built in mixer control valve and it´s connected wirelessly to the room sensor controller which has a built in timer were all settings can be done. It provide a high level of comfort and at the same time provides energy savings for the house owner. This boiler ...

By Ulma AB based in Svenljunga, SWEDEN. from Compact and Flexible Pellet Boiler Product line

Model PV 100c/ PV 188 c - Fully Automated Pellet Burner

Fully automated pellet burner PV100c and PV 180c is designed not only for heating of smaller industrial and public buildings, but those are also compatible with steam boilers, bakery ovens, driers and other similar systems which require advanced and cost-effective heating solutions. Burner is fixed to boiler’s door with ordinary ...

By Pelltech OÜ based in Harjumaa, ESTONIA. from Fully Automated Pellet Burner Product line

Use of Circulating Fluidized Bed Technology for Power Generation

Combustion within a circulating atmospheric fluidized bed (CFB) has proved its efficiency for many years and distinguishes itself by both flexibility with respect to feedstock and a high level of environmental acceptability. Thanks to the additional feed of lime stone, sulphur dioxide produced during the combustion process is absorbed to a degree ...

By Envirotherm GmbH based in Essen, GERMANY. from Use of Circulating Fluidized Bed Technology for Power Generation Product line

h.a.l.m. - Model cetisPV-Moduletest3 - Manual Solar Module Tester

The cetisPV-Moduletest3 is a ready-to-go class A+A+A+ rated high-precision manual tester system for the IV measurement of solar modules. It is developed for high R&D, laboratory and quality control use. It consists of the cetisPV-XF2-M flasher, a measuring system cetisPV-CTL1 (optional cetisPV-EL3-M), an optimized dark chamber construction and ...

By h.a.l.m. elektronik gmbh based in Frankfurt am Main, GERMANY. from Manual Solar Module Tester Product line

Model PV 50b - Pellet Burner

PV 50b is the third release in series of the 50 kW burners’ generation. The pellet burner is fully compatible with oil and steam boilers, bakery ovens, driers and other similar systems which require advanced and cost-effective heating solutions. Self-cleaning system makes PV50b virtually maintenance-free and also enables to use pellets with ...

By Pelltech OÜ based in Harjumaa, ESTONIA. from Pellet Burner Product line

PBS - Boilers for Biomass Combustion

Industrial boilers of our own design supplied in power ranges from 10 to 80 t steam/hour.

By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC. from Boilers for Biomass Combustion Product line

ATTSU - Model FTPM - Thermal Fluid Boilers

The FT-CS boiler is a Thermal Fluid Generator, with Horizontal execution with three passes and high thermal efficiency. With power from 100 kW to 6.000 kW.

By ATTSU TERMICA S.L. based in Cerla, SPAIN. from Thermal Fluid Boilers Product line

OptiCOM - Fluidized Bed Combustion System

A fluidized bed is an ideal method for the combustion of diverse and challenging solid fuels. Steenova's OptiCOM steam generator is an important step towards the perfection of combustion technology for solid, wet and muddy biogenic waste. For heat ballance reasons the bubbling bed combustion chamber is integrated in a high pressure steam ...

By SteEnova GmbH based in Freising, GERMANY.

HoSt - Fluidized Bed Gasifiers

HoSt acts as a turnkey supplier of (air blown) fluidized bed gasifier plants. By means of gasification biomass fuels can be converted to a combustible syngas, which can be cleaned and used in several kinds of power generation equipment. Gasification is a feasible technology for thermal conversion of waste, meeting the strict emission limits.

By HoSt based in Enschede, NETHERLANDS. from Fluidized Bed Gasifiers Product line

Tamult - Model PreBio - Biomass and Wastes Combustion System

Biomass (bark, wood chips, sawdust, shavings, cut offs), wood wastes and peat fired combustion systems 1 - 40 MWt with moisture content of fuels Wt=30 up to 64%. Power generation systems for solid renewable biomass fuels require much efforts. These fuels are often very wet and depending on their origin, their characteristics and fractions may vary ...

By AS Tamult Bioenergy based in Viimsi Vald, ESTONIA. from Biomass and Wastes Combustion System Product line

Fluidised Bed Combustion Plant

A waste to energy solution for the Waste Management Industry. The Fluidised Bed Combustor (FBC) system is a safe and efficient method of incinerating a wide variety of materials, solids liquids and sludges that are unsuitable for recycling. The heat recovery systems ensure that the energy inherent in the waste is converted to useful ...

By Wykes Group based in Rushden, UNITED KINGDOM. from Fluidised Bed Combustion Plant Product line

Aireal - Combustion Technology

The heart of a Novo waste-to-energy facility is the patented Aireal® Combustion System. The Aireal® Combustion System represents the latest development for combustion systems in the industry. This state-of-the-art mass burn design does not require any fuel preparation and has no moving parts exposed to the combustion zone. Fuel ...

By Novo Energy, LLC based in Fort Collins, COLORADO (USA).

Model HO-88 - Heavy Oil

HO-88 is an additive for the combustion of heavy oils. It is a liquid heavy oil additive made using a proprietary blend of organic compounds of chromium, cobalt, aluminum and iron dissolved in a petroleum base solvent. It minimizes the formation of SO3 (which causes corrosion of the boiler and slagging.) HO-88 increases the rate of combustion: oil ...

By Asia Coal Catalyst Company based in New York, NEW YORK (USA). from Heavy Oil Product line

Ecoremedy - Gasification System

The Ecoremedy advanced gasification, pyrolysis, and nutrient recovery process is elegant in its design. We’ve combined off-the-shelf, commercially available components with time-tested practices to create a unique gasification method and apparatus (US 6,948,436 B2) which we call Ecoremedy.

By Ecoremedy, LLC based in Mechanicsburg, PENNSYLVANIA (USA).

Add Supplier Profile