Refine by
Asynchronous Generator Equipment & Supplies
45 equipment items found
Manufactured by:AEM - Anhaltische Elektromotorenwerk Dessau GmbH based inDessau-Roßlau, GERMANY
Asynchronous generators are used to recover braking energy back into the system (“regenerative braking”), as well as to generate electrical energy. Speed and power factor are independent of this. In order to generate energy, the asynchronous generator requires a supply network ...
Manufactured by:Suzlon Energy Limited based inHadapsar, INDIA
The S82-1.5MW was designed for generating optimal power output even at sites with a modest wind speed regime. Inducted in 2006, the S82-1.5 MW is equipped with an asynchronous generator with high slip; it can operate within a limited speed range. In conjunction with the pitch system, it is possible to achieve an optimal energy yield within a wide ...
Manufactured by:Suzlon Energy Limited based inHadapsar, INDIA
The S66-1.25 MW was designed for generating the optimal power output even at sites with a modest wind speed regime. S66-1.25 MW is equipped with a dual-speed, dual-rating asynchronous generator; it can operate within a limited speed range. In conjunction with the pitch system, it is possible to achieve an optimal energy yield within a wide wind ...
Manufactured by:Winergy - Flender International GmbH based inBocholt, GERMANY
The double-fed asynchronous generators have proven themselves thousands of times over worldwide. A rotor fed by the converter is used for speed control. Together, the generator and converter meet all current grid codes. Due to the small size of the rotor converter and the converter losses from the rotor circuit, the system features a high ...
Manufactured by:DEIF A/S based inSkive, DENMARK
Heavy duty cut-in controller for asynchronous generators. The new generation of DEIF’s Thyristor Control Module (TCM-2) is very robust and designed to endure the harsh environment in a wind turbine. The TCM-2 is applied as a soft starter for connecting the turbine generator to the grid. ...
Manufactured by:I B Turbo Pvt Ltd based inNew Delhi, INDIA
An integral Woodward / RE governor ensures simple operation and high reliability. Suitable for use with Synchronous and asynchronous generators. Its flexibility has made it a popular choice for mechanical drive applications. A combination of pressurised and ring lubrication along with between bearings shaft design between has ensured full API 611 compliance and ...
Manufactured by:Nordic Wind Technology ApS based inIkast, DENMARK
S64 turbines are built to deliver an optimum output in locations with low to medium wind speed regimes. The turbines are equipped with a dual-rating asynchronous generator which – in conjunction with the pitch system – makes excellent energy yields with proportionately low loads ...
Manufactured by:Nordic Wind Technology ApS based inIkast, DENMARK
Today 3673.75 MW of total capacity of S62 and similar turbines (S64 and S70) is installed around the globe. S62 turbines feature an asynchronous generator with a SFS (Suzlon Flexi Slip) system. This enables the generator to run with a high slip and thus operate within a limited speed range. In combination with the pitch system this ensures an ...
Manufactured by:Nordic Wind Technology ApS based inIkast, DENMARK
Suzlon inducted the S82 turbine in 2006 and phased out production in 2015. During these years a combined capacity of around 3034.5 MW was installed worldwide. S82 turbines contain an asynchronous generator with a SFS (Suzlon Flexi Slip) system enabling the generator to run with a high slip and operate within a restricted speed range. This – ...
Manufactured by:Nordic Wind Technology ApS based inIkast, DENMARK
During that period a total of 3673.75 MW capacity was installed globally (counting S66, S64 and similar turbines). Suzlon designed the S66 with a dual-rating asynchronous generator and a pitch system that makes the turbine capable of delivering an optimum energy yield within a wide wind range with proportionally low loads. Nordic Wind Technology offers two ...
Manufactured by:Hydro Energy Michal Twardziszewski based inJelenia Góra, POLAND
Depending on the market price of electricity purchase cost of our Kaplan may apply even after one year of operation. Examples of typical size rotors and prices Kaplan turbines without asynchronous ...
Manufactured by:Voith GmbH & Co. KGaA based inHeidenheim, GERMANY
From the early 20th century, Voith has manufactured motor-generators. In 1976, the world’s most powerful motor-generators for Bath County (USA) were delivered. One of the largest capacity high-speed motor-generators were installed at Guangzhou II (China) in 2000. We offer technical excellence in synchronous as well as ...
Manufactured by:Nordic Wind Technology ApS based inIkast, DENMARK
Around 3673.75 MW of total capacity is installed around the globe (counting S70, S64 and similar turbines). Suzlon built the S70 turbines with an asynchronous generator and a SFS (Suzlon Flexi Slip) system, enabling the generator to run with a high slip. In combination with the pitch system, the generator ensures an optimized ...
Manufactured by:Hydropol Project & Management a.s. based inPrague 1, CZECH REPUBLIC
We deliver following electrical equipment. Asynchronous generators: 50 - 600 kW, voltage 0.4 kV, speed 600 - 1 500 rpm. Synchronous generators: 300 kVA - 20 MVA, standard voltage levels 400 V, 690 V, 6 or 6.3 kV, higher on request, speed 150 - 1 000 rpm, various arrangements. Larger generators including mechanical brakes. Smaller ...
Manufactured by:Nordex SE based inHamburg, GERMANY
With the Delta Generation, Nordex customers benefit from the know-how the Nordex Group has gathered in the multi-megawatt range over many years. Mature technical solutions that have proven their worth thousands of times form a sound basis for the generation of the 3 MW ...
Manufactured by:Norwin A/S based inSnoldelev, DENMARK
Nominal electric power: 200/750 kW. Power regulation: Active Stall Regulation (ASR) . IEC wind class: HB. Rotor diameter: 54 m. Rotor speed: 25.2 rpm at full load. Rotor: Three blades placed upwind of tower. Swept area: 2290 m2. Tilt angle: ...
Manufactured by:Norwin A/S based inSnoldelev, DENMARK
Nominal electric power : 200/500 kW. Power regulation : Active Stall Regulation (ASR). IEC wind class : IB and IIA. Rotor diameter : 47 m. Rotor speed : 25.2 rpm at full ...
Manufactured by:Bevi AB based inBlomstermåla, SWEDEN
BEVI offers asynchronous and synchronous generators up to approx 10000 kW. Special executions are made on ...
Manufactured by:AEM - Anhaltische Elektromotorenwerk Dessau GmbH based inDessau-Roßlau, GERMANY
Rotating frequency converters are machine units consisting of a motor and a generator. Unlike transformers, converter units are able to convert voltage and frequency thanks to the combination of machines with differing numbers of poles. Typical applications are 50/60 Hz, 50/ 50 Hz or 60/60 Hz. The frequency converter allows disconnection from the power supply, as well as ...
Manufactured by:Nordex SE based inHamburg, GERMANY
With the Delta Generation, Nordex customers benefit from the know-how the Nordex Group has gathered in the multi-megawatt range over many years. Mature technical solutions that have proven their worth thousands of times form a sound basis for the generation of the 3 MW ...