Only show results in Virginia? Ok

Biogas Combustion equipment

  • Showcase

    Model FA II - Closed-combustion Automatic Biogas Flare

    The FAII biogas flare is an automatic, enclosed gas flare for combustion of biogas and other combustible gases, fully complying with the widely applied German air pollution regulation TA Luft.+500 references in more than 50 countries witness the robustness of our FAII flares!Available in a rage of 20 - 3.000 Nm3/h, at various pressures.Highly ...

    By Bilgeri EnvironTec GmbH based in Fussach, AUSTRIA. from Biogas Flares Product line

  • Premium

    Model FA I - Manual / Automatic Open-Combustion Biogas Flare

    The FAI is an open-combustion flare, which can be configured in manual ignition as standard. Optionally, the FAI can be updated to Automatic mode, before or after* purchasing. That makes the New FAI the best and most cost-effective option for locations where no automatic flare is mandatory and open combustion is allowed!Available up to 500 Nm3/h, ...

    By Bilgeri EnvironTec GmbH based in Fussach, AUSTRIA. from Biogas Flares Product line

  • Premium

    Shand & Jurs Biogas - Model 97301 - Waste Gas Flare

    The S&J 97301 Waste Gas Burner is specifically designed for dependable “Flaring” operation that utilizes low BTU anaerobic digester waste gases. The 97301 efficiently incinerates waste gases thus minimizing odors and VOC’s. Using a stoichiometric pilot ignition system, the 97301 is able to acheive a stable pilot flame. Air and pilot gas are ...

  • Premium

    CONVECO - Model HT - Biogas Extraction and Combustion Plant

    Plant is built on a painted or hot galvanized carbon steel frame or in the container; The filter, intake manifold and outlet manifold are in stainless steel. The combustion flare is in stainless steel and lined covered internally with ceramic fibre. Primary combustion air adjustment takes place automatically in relation to combustion temperature. ...

    By CONVECO S.r.l. based in Brescia, ITALY.

  • Premium

    Model GC - Refrigerant Gas Dryer

    Biogas always contains water vapour in an unsaturated state. During combustion, the water vapour results in considerable corrosion damages to the gas engines and turbines. Malfunctions caused by these damages lead to significant downtimes and high repair costs. The use of a gas dehumidification systems can considerably extend the engines’ service ...

    By Bilgeri EnvironTec GmbH based in Fussach, AUSTRIA. from Biogas Treatment / Biogas Conditioning Product line

  • Premium

    Model HT - High Temperature Gas Flare

    The HT series flares are designed to offer a combustion temperature above 1000 °C and residency time longer than 0,3 s. This is to comply with the widely-applied German norm TA-Luft, in those case in which the flare is not just an emergency element, as well as in case of landfills and other complex and special gases.The HT features heat-resistant ...

    By Bilgeri EnvironTec GmbH based in Fussach, AUSTRIA. from Biogas Flares Product line

  • Premium

    CONVECO - Model C - Compact Biogas Extraction and Combustion Plant

    Plant available as a compact version on a painted or hot galvanized carbon steel frame; the filter, intake manifold and outlet manifold are in stainless steel. The combustion flare is in stainless steel and lined covered internally with ceramic fibre. Primary combustion air adjustment is manual. Ignition is automatic through the main control panel ...

    By CONVECO S.r.l. based in Brescia, ITALY.

  • Premium

    Model DMG - Double Membrane Biogas Holder

    Very usual technology in biogas applications, the double membrane gas holder consist of two three membranes forming a sphere cap with the ground. The outer membrane forms the actual protective construction and is always exposed to a positive pressure required for structural integrity. The processes inside the storage container can always be ...

    By Bilgeri EnvironTec GmbH based in Fussach, AUSTRIA. from Biogas Storage Product line

  • Biogasmart - Model ST - Elevated Biogas Flare Stack

    The T flare is a self-supported elevated flare (open type) complete with a safety ladder and an upper platform that allow access to the nozzle and ignition and flame control equipment. The flame shield is designed to prevent accidental flame extinguishing and provides a chamber lined with fiberceramic for more complete biogas combustion.

    By Biogasmart based in Gadesco Pieve Delmona, ITALY. from Combustion Product line

  • Biogasmart - Model HE-Type - High Efficiency Biogas Flare Stack

    HE-Type is an enclosed ground flare; combustion takes place within a cylindrical chamber lined with fiberceramic and this causes a higher destruction efficiency of the biogas in comparison to open flares. Enclosed combustion also makes flame and noise less perceptible and for this reason these flares are normally selected for installation in ...

    By Biogasmart based in Gadesco Pieve Delmona, ITALY. from Combustion Product line

  • Premium

    ETG - Model 6500 - Biogas Analyzer Plug & Play System

    The ETG Biogas 6500 analyzer series is the ideal solution for the measurement of biogas combustion and industrial applications for their precision, stability, reliability, wide measuring range, and variety of form factors available. Unlike other analyzers, ETG 6500 uses NDIR techniques for the measurement of CH4 and CO2. These single-point ...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY. from Biogas - Syngas Analyzer Product line

  • Premium

    ETG - Model MCA BIO 100 Series - Biogas Analyzer 19 Inch Rack Mounting

    Biogas analyzer MCA BIO 100 series is the ideal solution for the measurement of biogas combustion and industrial applications For Their precision, stability, reliability, wide measuring range, and variety of form factors available. Unlike other analyzers, ETG MCA 100 uses NDIR techniques for the measurement of CH4 and CO2 These single-point ...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY. from Biogas - Syngas Analyzer Product line

  • Premium

    ETG - Model MCA 100 SYN - Stationary Syngas Analyzer System

    The series of Biogas analyzers MCA Syn 100 is the ideal solution for the measurement of syngas combustion and industrial applications due to their accuracy, stability, reliability, wide measuring range and variety of form factors available. Unlike other analyzers, ETG MCA 100 uses NDIR techniques for the measurement of CH4, CO2 and CO These ...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY. from Biogas - Syngas Analyzer Product line

  • Premium

    ETG - Model 6700 - Wobbe Index Analyzer BTU and Calorimeters

    The ETG 6700 is an all-optical analytical platform using a TFS (tunable filter spectrometer) sensor powered by MKS Instruments – Precisive. Offering a GC like speciation at unparalleled speed (less than 5sec); the TFS requires no carrier gas, it uses infrared absorption to measure methane, ethane, propane, butanes pentanes, carbon dioxide ...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY. from Biogas - Syngas Analyzer Product line

  • ATTSU - Model S - Biogas - Horizontal Hot Water Boiler

    The boiler S is a horizontal hot water boiler, firetube, three pass boiler with reverse flame and smoke chamber completely cooled by the water in the boiler. This boiler is specially designed for use with biogas. With Thermal power 200-3500 kW and design temperature to 110 ° C. The construction of the S series boilers guarantees high output ...

    By ATTSU TERMICA S.L. based in Cerla, SPAIN. from Hot Water Boilers Product line

  • Biogasmart - Model HTS - High Temperature Flare Stack

    HT-S Type are high-performance enclosed ground flare stacks where biogas combustion temperature, flame retention time and destruction efficiency are the results to be achieved. Combustion occurs inside the base refractory combustion chamber and is completed in the upper cylindrical chamber lined with fiberceramic, under a controlled environment.

    By Biogasmart based in Gadesco Pieve Delmona, ITALY. from Combustion Product line

  • Biogasmart - Model HTE Series - High Temperature / Emergency Flare Stack

    HE-T series consist of enclosed ground flares specifically developed for installation in biomass plants where biogas combustion at full-flow is not expected to be required continuously, instead only occasionally when, for instance, engines are being serviced.

    By Biogasmart based in Gadesco Pieve Delmona, ITALY. from Combustion Product line

  • Innovative CHP Technologies

    The utilisation of new biomass fuels and the development of next generation combustion systems should provide the basis for more cost efficient heat as well as combined heat and power production from biomass in the future. However, the CHP technologies presently available on the market are restricted to the large (steam cycles for plants >2 ...

    By BIOENERGY 2020+ GmbH based in Graz, AUSTRIA. from Combustion Product line

  • Agama Biogas-Pro

    The BiogasPro is a high-efficiency biogas digester designed by some of SA's leading biogas experts specifically for domestic- and institutional-scale installations.  BiogasPro is an underground plastic tank that produces a combustible gas and liquid fertilizer by digesting sewage, kitchen waste, wastewater and similar organic materials. The ...

    By WASP Systems based in Nairobi, KENYA. from Biogas Product line

  • HOFGAS - Model IFL1c - Standard Gas Flare for Gasholder Operation

    Standard biogas / WWTP gas flare for sewage or biogas plants. Ideal in combination with gasholder operation and gas systems with constant pressure ratios. Thanks to concealed combustion, the HOFGAS-IFL1c flare attains more than 99% combustion efficiency. Because of no visible flame, erection of the gas flare is most advantageous even near ...

    By Hofstetter BV based in Schiphol-Rijk, NETHERLANDS. from Biogas Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you