Biogas Treatment Equipment
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The BgPur system is our proven solution for biogas treatment from anaerobic digesters and landfill. The system reduces hydrogen sulfide (H2S) concentrations and converts it to solid elemental sulfur for resale. The system uses a liquid chemical catalyst, compact gas/liquid contactor, and solids removal system and does not consume the ...
-
Manufactured by Prodevalbased in FRANCE
Depending on its source, biogas contains a variable quantity of different pollutants (VOC, siloxanes, H2S among others) that it is necessary to process before using the biogas. To remove these pollutants, we offer a treatment using activated carbon ...
-
Manufactured by Prodevalbased in FRANCE
The process consists in separating methane from the other compounds (carbon dioxide, water, oxygen…). It is based on the use of high performance membranes which make it possible to reach a purification rate of >99 % and a quality of biomethane that complies with the standards required for injection into the natural gas ...
-
Manufactured by Biogasmetano S.r.l.based in ITALY
Biogas is renewable source of natural gas generated from the anaerobic digestion of waste materials in municipal landfill, waste water treatment plants and anaerobic digestion processing agricultural and industrial ...
-
Manufactured by Hydrotech a.sbased in SLOVAKIA
The by-product of anaerobic treatment is a high-energy biogas which can be combusted in its own boiler room or possibly fed to the central boiler in the ...
-
Manufactured by Adicomp S.r.l.based in ITALY
Biogas compression and treatment system composed of an oil-injected rotary screw gas compressor, directly coupled to an elec-tric motor through a flexible coupling, controlled by inverter and by pass. The regulator system could be customized to follow customer needs. Typically used for turbine fuel, endothermic engine or ...
-
Manufactured by Adicomp S.r.l.based in ITALY
Biogas compression and treatment system composed of an oil-injected rotary screw gas compressor, directly coupled to an electric motor through a flexible coupling, controlled by inverter and by pass. The regulator system could be customized to follow customer needs. Typically used for biogas ...
-
Manufactured by Suomen Biovoima Oybased in FINLAND
Separators – digestate separation into solid and liquid fractions. The end product of the biogas plant, the digestate, is often separated into solid and liquid fractions, which improves its possible further processing and usability as a fertilizer. Nitrogen and potassium, one of the most important nutrients in the digested residue, ...
-
Manufactured by Suomen Biovoima Oybased in FINLAND
Equipment for feedstock streams treatment for a biogas plant by separating different waste types and crushing the feedstock to optimal-sized ...
-
Manufactured by YHR - Beijing Yingherui Environmental Technology Co., Ltd.based in CHINA
Material: Glass-Fused-To-Steel, Type: Bolted Steel Tank, Color: RAL5013 Cobalt Blue, RAL6006 Grey Olive, RAL9016 Traffic White, RAL3020 Traffic Red, RAL 1001 Beige (Tan), Coat Thickness: 0.25-0.45mm, Coating Process: Standard 2 fires 2 coats, 3 fires 3 coats available, Adhesive: 3450N/cm, Elasticity: 500KN/mm, Hardness: 6.0 Mohs, PH Range: Standard Grade 3~11; Special Grade 1~14, Service Year: ...
-
based in PORTUGAL
The reactor is built in stainless steal, with retention time, which is considered a huge safety reserve for possible concentration and flow rate peaks. The SILOXANE REACTOR can have one or more chambers, depending on the biogas flow rate. It is vital to have an effective biogas pre-treatment regarding the removal of siloxanes to ...
-
Manufactured by Encon Clean Energybased in NETHERLANDS
The biogas dryers from our partner BioBG, made entirely from stainless steel, dry the biogas extremely efficiently and reliably. The BioBG biogas dryer functions very efficiently. By using the countercurrent principle of the heat from the incoming biogas, this biogas dryer works 30% more efficiently than a ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
Biogas always contains hydrogen sulphide (H2S). Usually, it moves in the range of 1,000 to 6.000ppm, but it can also reach 2% by volume or more. Often this H2S must be removed from the gas, either because of environmental protection reasons or because corrosion danger. The EnvironTec's desulphurization process provides a cost- effective yet ...
-
Manufactured by Encon Clean Energybased in NETHERLANDS
We will tell you everything you need to know about purchasing biogas desulfurization equipment. Encon Clean Energy offers sustainable solutions in the field of manure and biogas treatment. We realize new sustainable and commercial concepts with proven techniques, with the use of equipment provided by our partners, to meet the increasing ...
-
Manufactured by Conveco Srlbased in ITALY
The plant is composed of several sub-sections each one accomplishing a specific treatment stage. The scrubbing tower features a proprietory injection set design providing effective counterflow biogas washing which, together with the long contact time between the washing solution and biogas mixture, dramatically reduces the H2S content ...
-
Manufactured by Conveco Srlbased in ITALY
UTB wet scrubbers are the most suitable option for small and mid-size plants and are designed for removal of hydrogen sulfide (H2S). Biogas is washed with a water-NaOH solution in a two-stage process: premixing at the inlet, and extended counterflow contact in a packed bed tower with the scrubbing ...
-
Manufactured by TS energy Group Srl/GmbHbased in ITALY
The BIOaccelerators is an extruder which optimizes the input substrate breakdown through defibration in order to achieve a higher biogas yield. New substrate can thus be added faster to the fermentation process. Through a thermo-mechanical treatment of the substrate by means of two juxtaposed, interlocking screws, the input material is ...
-
Manufactured by TS energy Group Srl/GmbHbased in ITALY
The raw material passes from a feeder through a lateral auger into a worm gear, which fills the BIOseparatorw. The unpacked biomass, freed from its impurities, is crushed and shredded by grinding mills and a grinding sieve, and flows into a pump receiver tank, from where it either flows directly into a storage tank or can be pumped out. Impurities (glass, metals, plastic, etc.) are ejected ...
-
Manufactured by Conveco Srlbased in ITALY
FCA activated carbon filters are installed for contaminants removal from biogas/air and odour control. Selection of the most suitable activated carbon is based upon the application and the contaminant to be removed (siloxanes). The unit is composed of a vessel in which the contaminated stream enters at the bottom and flows upwards ...
-
Manufactured by ECOTEC, Ecología Técnica, S.A.based in SPAIN
A Bioscrubber comprises a biological system in two stages that facilitates the immediate absorption of contaminants in an alkaline medium, obtaining transfer efficiencies greater than 99% and thus achieving emissions of undiluted biogas free of H2S. The Empty Bed Residence Time (EBRT) inside the scrubber is minimal, which leads to lower ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you