Burner Equipment In Georgia (US)
-
Manufactured by Centrotherm Clean Solutions GmbH & Co. KGbased in GERMANY
The CT-BW point-of-use abatement systems set global standards in waste gas abatement. They are highly efficient system used in CVD and etching applications for photovoltaic, semiconductor and related industries. As new process tools and technologies with highly corrosive gases and increasing gas loads are introduced, further improvements in abatement technologies are ...
-
Manufactured by Mitsubishi Hitachi Power Systems, Ltd. (MHPS)based in USA
Mitsubishi Hitachi Power Systems firing systems and components cover a practically unlimited range of gaseous, liquid and solid fuels. The DS® Burner is developed and optimized for a variety of pulverized fuels. As a designer and manufacturer of original parts, we are an ideal partner for modernization and retrofit projects. Depending on ...
-
Manufactured by McPherson Systems Inc.based in USA
The McPherson Systems air curtain destructor, also known as trench burner, air curtain incinerator, curtain burner, is an alternative to open burning as a method of waste disposal. The trench burner is effective in reducing smoke and other pollutants especially where open burning is prohibited by law. ...
-
Manufactured by McPherson Systems Inc.based in USA
McPherson systems builds durable, heavy-duty refractory pit burners. since 1985, we have built air curtain burners that are meant to last. A power source, either electric motor or diesel power unit, drives a fan which in turn creates an air curtain by forcing air through a plenum and nozzle. This high velocity forced air travels across the ...
-
Manufactured by Cleaver-Brooksbased in USA
The ProFire SBR-30 series is designed for a variety of boiler types such as firetubes, and watertubes. Capable of less than 30 ppm NOx emissions without FGR, the SBR-30 series features a unique firing head design to achieve controlled combustion leading to low emissions with 3% O2. Advanced technology allows the SBR-30 series to offer low-NOx, low CO emissions and up to 10:1 turndown on natural ...
-
Manufactured by Alternate Energy Systems, Inc.based in USA
Test Flares are used during system setup, and for periodical system tests and maintenance. They represent large loads, and allow the system to be tested under simulated load conditions. AES manufactures standard test flares with 2" or 3" gas lines. Other flares for specific systems are available as customer specials. All AES test flares are equipped with automatic ignition, standing pilot, ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen (O2) and fuel in premix gases, operating in either excess fuel or excess air conditions. It has the capability to measure the air/fuel ratio in open-flame applications where flue gas measurements are not practical, with measurement and display options including excess O2, excess fuel, oxides/fuel ratio and ...
-
Manufactured by Dieffenbacher GmbHbased in GERMANY
Adequately proportioned combustion chamber for a long retention time at over 850 °C. Short installation times and a low level of wear. Maximum availability and life time. Complete burn-out with low ...
-
Manufactured by Sigma Thermal, Inc.based in USA
The bath solution is heated by a fire tube style burner submerged at the bottom of the heater vessel. Water-glycol mixtures are very common solutions for most low-temperature heating applications, and can typically be used up to 250F. ...
-
Manufactured by Atlas Manufacturing, Incbased in USA
Atlas carries a full line of ADP natural or LP gas high efficiency power vented heaters with spark ignition and aluminized steel burner. The direct drive propeller fans are dynamically balanced for quiet and smooth operation. The heater incorporates a time delay to allow the aluminized steel heat exchanger to rise to a certain temperature ...
-
Manufactured by Miura Co.,Ltdbased in JAPAN
On the burner side, 80% and more boiler efficiency is secured by the newly developed boiler proper, and gas flow speedup promotes the heating improvement. Soot blower is arranged on the Exh. gas side water tubes, and then good efficiency operation is ...
-
Manufactured by Cleaver-Brooksbased in USA
condensing and reduce flow rates. The highly effective fireside heating surface with industry leading AluFer® tubes leads to superior efficiencies in all operating conditions. The modulating, premix burner control automatically adjusts the air/gas mixture for maximum burner efficiency. The linkageless burner provides fully modulating ...
-
Manufactured by Supplier Support International, Inc. (SSI)based in USA
The unique features of the Heat Injector allows it to be applied as a Direct Gas-Fired Duct Heater for many different applications. The clean buring characteristics of the burner with dedicated combustion blower injects heat without adding a load on the air moving device. The applications where we have been able to apply the Heat ...
-
Manufactured by Sigma Thermal, Inc.based in USA
The pre-engineered HC2 thermal fluid heater is available in standard sizes from 500,000 to 100 MM BTU/hr. Configuration options include vertical up-fired, vertical down-fired, and horizontal. This system is skid mounted with a burner and integrated control panels. Sigma Thermal also offers custom thermal fluid heater designs for a wide ...
-
Manufactured by Cleaver-Brooksbased in USA
The ClearFire-H is a compact horizontal, gas-fired, steam boiler designed for all of your steam heating and process needs, available in ten sizes. The AluFer® tubes with extended fireside heating surface provide maximum heat transfer for superior performance with a small installed footprint The premix burner automatically adjusts the ...
-
Manufactured by Cleaver-Brooksbased in USA
The CBCW is the newest addition to the Cleaver-Brooks IWT family. Designed with a 100% membrane water-cooled furnace, this boiler system includes a high-efficiency boiler and burner, heat recovery economizer, advanced control system, and complete exhaust stack, ducting and platforms. All available at shortened lead times and includes ...
-
Manufactured by Cleaver-Brooksbased in USA
The Cleaver-Brooks CBEX firetube boiler featuring EX technology is a completely integrated boiler, burner, and controls system. Every core component has been designed and built by Cleaver-Brooks to work together, resulting in the most efficient and lowest-emissions firetube system ever built. The CBEX achieves higher operating efficiency ...
-
Manufactured by Cleaver-Brooksbased in USA
The FLX boiler package includes a burner, trim, and control system for a completely integrated and engineered solution from a single source. Each boiler design was witness tested by a third party in Cleaver-Brooks state of the are boiler laboratory to ensure maximum reliability. FLX has distinct design features that include non-welded ...
-
Manufactured by Mitsubishi Hitachi Power Systems, Ltd. (MHPS)based in USA
Higher thermal efficiency. Full steam temperature controllability over a wide load range, thus taking wide range of coal quality. Faster start-up and cooling down of the boiler. High reliability for emergency load runback. Operation is as easy as Drum ...
-
Manufactured by Schwankbased in USA
The primoSchwank infrared heater is designed specifically for industrial and commercial spaces with high ceilings including manufacturing facilities, warehouses, aircraft hangars, etc. With one of the best efficiency rates in North America for its class the primoSchwank is designed to heat spaces with ceilings as tall as 180 feet [55m], making it the perfect warehouse heater. Capable of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you