Burner Equipment In Utah
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec Biogas 244E Enclosed Burner Systems are designed to burn biogas efficiently and safely over a wide range of operating parameters. With no visible flame, the 244E systems use an innovative stack design to naturally induce the proper amount of combustion air which guarantees high destruction removal ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec 244W Series is a highly reliable flare and ignition system. It utilizes a patented pilot ignition system that mixes pilot gas and air at ground level to provide a robust, high temperature pilot. The pilot is ignited away from the flare stack. This reduces wear and tear and allows routine maintenance to be carried out without exposing the operator to high temperatures. The design of the ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec 239A Series Waste Gas Burner is designed for burning biogas generated in the anaerobic digestion process. Burning or flaring to the atmosphere reduces the potential odor nuisance from venting directly to the atmosphere. This burner is suitable for burning low volumes of biogas, which is typically very 'wet', with a low BTU value ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec Biogas 249 Series Enclosed Flare is a flare specifically designed for biogas application. It is primarily used in areas where flare stack emissions are controlled and regulated. The sophisticated design of the 249 Series is a top-of-the-line, full-featured, drop-ship product, where all eventualities have been carefully considered at the design phase. After the product is shipped, our ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen (O2) and fuel in premix gases, operating in either excess fuel or excess air conditions. It has the capability to measure the air/fuel ratio in open-flame applications where flue gas measurements are not practical, with measurement and display options including excess O2, excess fuel, oxides/fuel ratio and ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as ...
-
based in USA
Rich Reagent Injection (RRI) is a new NOx control technology that provides coal-fired generating units with a cost-effective means of complying with NOx regulations. The RRI process reduces NOx formation by injecting amine-based compounds into the fuel-rich regions of furnaces. The RRI process was originally developed for coal-fired cyclone boilers, and performs well in the fuel-rich lower ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you