Only show results in Virginia? Ok

burner equipment

  • Premium

    CTP - HVOC Burner

    HVOC burners can be used for the economic combustion of highly concentrated flue gases.

  • Premium

    AEREON - Chimera Liquid Burner

    The Chimera was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for various onshore applications that require high destruction efficiency of liquid hydrocarbons. When oil is flared, a high pressure media such as an air, gas, or steam is required to mechanically ...

    By AEREON based in Austin, TEXAS (USA). from Chimera Liquid Burner Product line

  • Premium

    AEREON - Peacock Liquid Burner

    The Peacock Burner was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for well testing operations and have been used in applications in the Gulf of Mexico and Arabian Gulf. When only oil is flared, a high pressure air or gas source is required to provide mechanical ...

    By AEREON based in Austin, TEXAS (USA). from Peacock Liquid Burner Product line

  • Premium

    CTP - Multi Fuel Burners

    Multi Fuel Burner: Multi fuel burners can be employed in a wide range of applications for gaseous and fluid combustibles, or liquid waste with a high combustion heat level.

  • Premium

    Shand & Jurs Biogas - Model 97300 - Waste Gas Burner

    The Shand & Jurs Biogas 97300 Waste Gas Burner is specifically designed for dependable 'Flaring' operation that utilizes low BTU anaerobic digester waste gases. The 97300 efficiently incinerates waste gases thus minimizing odors and VOC’s. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Waste Gas Burner Product line

  • Nu-Way - Model NG 45 - Burner

    This burner is suitable for use on natural gas and LPG (Towns gas and biogas on request) with-two stage high/low or modulating operation. All N series burners are custom-built and designed for easy maintenance. This range is typically suited for high resistance, hot water and steam boilers.

    By Nu-way Enertech Limited based in Droitwich, UNITED KINGDOM. from Burner Product line

  • Dunphy - Model B and HB Series - Burners

    Dunphy ‘B’ Series burners are supplied for a wide range of applications and designed to match specific customer needs and / or site requirements. Units supplied are therefore variants of a basic, standard design.

    By Dunphy Combustion Ltd based in Rochdale, UNITED KINGDOM.

  • COOLstar - Burner

    The COOLstar burner is an advanced solution for very compact, ultra-low NOx gas firing applications. Thousands of COOLstar burners are in service today because of its proven performance.

    By John Zink Company, LLC based in Tulsa, OKLAHOMA (USA).

  • DYNTest RegFire - Burner

    Operation and diagnostic parameters can be set by burner configuration tool. RegFire is equipped with an electronically controlled vaporizer and a special long-life glow plug which will ensure a perfect combustion as well as a safe and stable operation at preset values. A rather special safety feature is the cooled shell. An integrated pump allows ...

    By CPK Automotive GmbH & Co KG based in Muenster, GERMANY. from Burner Product line

  • Nu-Way - Model ST 50 - Burner

    This burner is suitable for use with both light oil and kerosene with single stage on/off operation. Available for both conventional and ducted air options and is typically suitable for domestic and commercial hot water boilers, air heaters. Sterling oil and gas burners are commonly used by many boiler manufacturers including Worcester Bosch, ...

    By Nu-way Enertech Limited based in Droitwich, UNITED KINGDOM. from Burner Product line

  • Eurotherm - Burner

    When short, uncomplicated planning and commissioning is important for standard applications or compact process firing systems (for example support firing systems with waste incineration plants), your first choice is the SAACKE EUROTHERM series of pressure atomizers. With an integrated fan, optimized air flow and integrated fuel fittings, these ...

    By SAACKE GmbH based in Bremen, GERMANY. from Burner Product line

  • BROX - Model BRX SERIES - BURNERS

    More then 10.000 BROX burners & process burners with capacities from 50kw up to 41000kw, and more than 800 boilers with heating surface from 25m² uo to 350m² running in various sectors

    By Elektro Dinamik Brox based in TURKEY.

  • Halo - Burner

    John Zink’s patent-pending HALO burner is designed with three combustion stages instead of the typical two seen in most low-NOx burner designs. The HALO burner delivers step-change advances in safety, operating flexibility, stability, turndown, flame shape, noise attenuation and heat flux distribution.

    By John Zink Company, LLC based in Tulsa, OKLAHOMA (USA).

  • Nu-Way - Model ST 130 - Burner

    This burner is suitable for use with both light oil and kerosene with single stage on/off operation. Available for both conventional and ducted air options and is typically suitable for domestic and commercial hot water boilers, air heaters. Sterling oil and gas burners are commonly used by many boiler manufacturers including Worcester Bosch, ...

    By Nu-way Enertech Limited based in Droitwich, UNITED KINGDOM. from Burner Product line

  • Burners

    Burners comprise the heart of a combustion system.  Our staff members  have lived through the progression of burner objectives from maximum heat release through fuel efficiency, safe operation, and consuming difficult fuels to the control of NOx and unburned hydrocarbon emissions.  Today’s demands also include low maintenance ...

    By Tulsa Combustion based in Sand Springs, OKLAHOMA (USA).

  • Burners

    The ENETEX burner is a special innovation for TOS and COS systems and air heaters. The oxygen required for combustion is taken directly from the preheated exhaust gas or from the process air before heating. The temperature-resistant design and special formation of the fuel lance and burner basket are responsible for the long service life of our ...

    By ENETEX GmbH based in Steinau a. d. Str., GERMANY.

  • Model AZZD-500 - Burner

    AZZD-500 type burner is an automatic, maintenance-free device used to burn fuel in form of sawdust briquette with granulation of 60 mm and of 100-300 mm in length. It cooperates with central heating boilers for solid fuels.

    By Zakłady Maszynowe Hamech Sp z o.o. based in Hajnówka, POLAND. from Burner Product line

  • Model AZZP – 50 - Burner

    AZZP 50 type burner is used to burn fuel: wood waste in form of wood chips, pellet, sawdust with moisture of 40% and granulation of 30 mm and turf with moisture of 40%. It can cooperate with open heating system boilers. Fuel from the tank is fed into the burner with ceramic lining by means of a driven worm conveyor. Fuel gasification takes place ...

    By Zakłady Maszynowe Hamech Sp z o.o. based in Hajnówka, POLAND. from Burner Product line

  • Nu-Way - Model MOL 200 - Burner

    This burner is typically suited for commercial hot water boiler and steam boiler systems. Available for use with light oil Class D fuel with. single stage on/off . 2 stage high/low operation.

    By Nu-way Enertech Limited based in Droitwich, UNITED KINGDOM. from Burner Product line

  • TEMINOX - Model GLS - Burner

    There are different ways to guarantee a permanent low emission level. The TEMINOX GLS pressure atomizer series offers what is probably the most effective way. Burners of this series are available either as monoblock or duoblock burners and have been optimized in every detail to ensure low-pollution combustion. It does not matter which version is ...

    By SAACKE GmbH based in Bremen, GERMANY. from Burner Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you