Only show results in Virginia? Ok

burner equipment

  • NATCOM - Duct Burner

    NATCOMs duct burner technology ensures the lowest levels of NOx, CO, VOC, and PM emissions available, even in the most challenging service conditions. NATCOM is the only duct burner supplier to offer a complete system with an innovative duct burner solution for the cogeneration and combined cycle markets.

    By Cleaver-Brooks based in Thomasville, GEORGIA (US) (USA). from Duct Burner Product line

  • KIPI - Feeder for Burners

    Ordering burner included KIPI receive a tray. Tray is used to transport fuel from the tank - serves as a pellet dispenser. It is made of stainless steel tube and additionally equipped with a viewing window (peephole) - allowing you to watch the feeder.

    By KIPI Pellet Burners based in Suchy Las, POLAND. from Feeder for Burners Product line

  • KIPI - Model 20 - 100KW - Pellet Burners

    We present you a fully automated, modern device that is designed for  burning pellets and agro-pellets (e.g. pellets from rape straw or sunflower husks pellets). The burner applies innovative design of cleaning mechanism – a  rotary blower and combustion chamber, which enables the burner to lean itself from the ashes ...

    By KIPI Pellet Burners based in Suchy Las, POLAND. from Pellet Burners Product line

  • KIPI - Model 30 - 200 KW - Pellet Burners

    Viewing a fully automated device enables the latest generation of burning pellets and agri-pellets (eg. Pellets from rape straw or husks of sunflower). In the burner uses an innovative design of cleaning mechanism - the rotating combustion chamber, through which the burner itself is purified from the ashes and zgożeli. Burner does not require ...

    By KIPI Pellet Burners based in Suchy Las, POLAND. from Pellet Burners Product line

  • Ariterm - Model PX22 & PX52 - Pellet Burner

    The Ariterm PX burners are manufactured of stainless, acid-proof and high temperature resistant steel – a material that is carefully selected considering long service life and low costs. Installation is simple and the horisontal flame tube design makes the burner easy to adapt for almost any type of boiler. Combustion is very effective with ...

    By Ariterm based in Kalmar, SWEDEN. from Pellet Burner Product line

  • ITAS - Process Burners

    Installed with a fired heater, a cracker furnace or a reformer, process burners are a critical element in the refining and petrochemical processes. Whatever the application, the technical requirements or project specifications, Fives designs and supplies a complete range of ITAS process burners, from engineering design to site assistance and ...

    By Fives I.T.A.S. s.p.a. based in Monza, ITALY. from Process Burners Product line

  • MultiBio - Model 50 - Pellet Burner

    Advantages of MultiBio 50 kW Burner: Multibio Burner combust either wood pellets, or sintering agricultural fuels. Automatic heating, ecologic environmentally friendly operation.

    By Petrojet Trade s.r.o. based in Rakovník, CZECH REPUBLIC. from Pellet Burner Product line

  • Monoblock Burners

    Fuel options: gas, oil, or special fuels; Excellent combustion performance thanks to internal burner technology; Noise level < à 85 dBA; Easily adaptable for extremely low NOx emission levels.

    By BABCOCK WANSON - CNIM Group based in Chevilly-Larue Cedex, FRANCE. from Monoblock Burners Product line

  • Lundberg - Sulfur Burners

    The generation of sulfur dioxide from burning elemental sulfur has a wide range of applications. It is used in the pulping process as well as other industries from wet corn milling to soap manufacturing. The Lundberg system is suitable for all of these applications. The size of the system is suited to the mill application, and the range of sizes ...

    By Lundberg, LLC based in Bellevue, WASHINGTON (USA). from Sulfur Burners Product line

  • Incini - Cone Burner

    Incini-Cone burners are designed for fume incineration and the after-heating of exhaust from turbines, dryers, ovens and similar equipment. The burner is mounted in the exhaust duct and requires the exhaust stream to supply all of the oxygen needed for complete combustion. Burner assemblies include the burner body, gas or oil gun, gas pilot with ...

    By Eclipse, Inc. based in Rockford, ILLINOIS (USA). from Cone Burner Product line

  • Tips - Blast Burners

    Blast Tips are small burners designed to handle combustible mixtures of gas and air under sufficient pressure to cause a blast-like flame. In general, Blast Tips are built to burn without the use of any refractory tunnel and are either self-piloting or built to prevent the flame from blowing away under normal conditions of operation. Blast Tips ...

    By Eclipse, Inc. based in Rockford, ILLINOIS (USA). from Blast Burners Product line

  • Industrial Burners

    We specialize in low calorific value gas burners, burners are available for blast furnace gas, producer gas, mixed gas; synthetic gas both direct fired and regenerative burner. Biogas fired boiler burner can be supplied ex-stock. We also produce special burners for client including incinerator burner with large heat output. Refurbishing , start-up ...

    By Puti Energy based in Bhosari, INDIA.

  • Model 1010 - Bunsen Burner

    Bunsen Burner air regulation .needle valve.1010 Natural gas 250 g.

    By Carl Friedrich Usbeck KG based in Radevormwald, GERMANY. from Bunsen Burner Product line

  • Maxflam - Model 68 to 17000 kW - Monoblock Burners

    MAXFLAM and OILFLAM range work with heavy oil up to 50°E at 50°C with On/Off switch to exclude the circuit heaters in order to operate also with low viscosity heavy oil.

    By Ecoflam Bruciatori S.p.A. based in Resana (TV), ITALY. from Monoblock Burners Product line

  • Maior - Model 415 to 17000 kW - Monoblock Burners

    All burners feature high versatility on different types of domestic, commercial and industrial application.

    By Ecoflam Bruciatori S.p.A. based in Resana (TV), ITALY. from Monoblock Burners Product line

  • Biomass Burners

    Energy Unlimited Inc has been manufacturing and installing sawdust burners for over 15 years. We have supplied sawdust burners forrotary drum dryers drying many products including, alfalfa, wood shavings, sawdust for wood pellets and plastic lumber, shrimp heads, bakery waste and PVC resin. We can attach our sawdust burner to your existing rotary ...

    By Energy Unlimited Inc based in Dodgeville, WISCONSIN (USA).

  • Usbeck - Laboratory Burners

    Optimum stability for Usbeck laboratory burners and preservation of surfaces available under no.

    By Carl Friedrich Usbeck KG based in Radevormwald, GERMANY. from Laboratory Burners Product line

  • VEE GEE - Model 3040 - Alcohol Burner

    VEE GEE Model 3040 Alcohol Burners feature a sturdy, heavy-walled glass design with a large capacity of 150ml. Fitted with a nickel-plated brass cap used to extinguish the flame and to prevent the evaporation of alcohol. Either methyl or ethyl alcohol can be used with the lamp.

    By VEE GEE Scientific, Inc. based in Kirkland, WASHINGTON (USA). from Alcohol Burner Product line

  • adVantage - Duct Burner

    adVantage® duct burners perform in the most challenging conditions. Premium components and patented technology join to perform like no other duct burner. This design works best in advanced gas turbine applications, especially those with water or steam injection, where low emissions are critical. Forney’s adVantage® duct burners are ...

    By Forney Corporation based in Addison, TEXAS (USA). from Duct Burner Product line

  • Catalytic Burner

    PCI has several very small to medium sized low NOx catalytic burner products in development. Our gas burner technology was developed under an NSF program with promising results including flameless catalytic combustion of natural gas with CO less than 2 ppm, CH4 less than 2 ppm and NOx less than 0.3 ppm. We have further developed this for use with ...

    By Precision Combustion, Inc. (PCI) based in North Haven, CONNECTICUT (USA). from Catalytic Burner Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you