Only show results in Virginia? Ok

Burner equipment

  • Dumag - Model CSP - Constant Speed Burner

    Orifice gas lances adapting to variation in flow rate. Placed at the combustion chamber. Constant flow velocity and pressure drop. High turn-down ratio of up to 1:50. High potential in utility savings. Alternative design as a variable gas burner with optional combustion air connection.

    By CTP-DUMAG GmbH based in Gumpoldskirchen, AUSTRIA. from Industrial Burners Product line

  • Model PV 250 - Pellet Burner

    The new PV 250 burner is perfect to use with medium power systems from 70 kW with peak of 250kW. Like all industrial burners, PV 250 has mechanical grate cleaning system. This ensures perfect burning quality and a long service interval. The burner has a very compact design with all the components easy to maintain. Burners unique electrical ...

    By Pelltech OÜ based in Harjumaa, ESTONIA. from Pellet Burners Product line

  • LOOPFIRE - Recuperative Burner for U- and W-type Radiant Tubes

    Burner recuperator system for the heating of U- and W-type radiant tubes, high efficiency by double recuperator, low NOx emissions by integrated flue gas circulation, in particular suitable for blast furnace – coke oven mixed gas, coke oven gas as well as for all other industrial fuel gases, long lifetime of the radiant tube due to optimized ...

    By IBS Industrie-Brenner-Systeme GmbH based in Hagen, GERMANY. from Industrial Burners Product line

  • Durag - Model D-GF 150-MB - Self-Monitoring and Fail-Safe Burner Control System

    Self-monitoring and fail-safe burner control with integrated Display and Modbus communication for the control of gas and oil burners as well as combined gas/oil burners of any capacity.

    By DURAG GmbH based in Hamburg, GERMANY. from Burner Controls Product line

  • Model BS - Cast Iron Burner

    Cast iron burner with mechanical feeding system; Hopper for the combustible material; Variable speed screew for automatic feeding; Primary and secondary combustion air system; Voltage: 230 V up to 120 kW, 400 V from 130 kW up to 2400 kW.

    By D`Alessandro Termomeccanica based in Miglianico (CH), ITALY. from Automatic Burners Product line

  • Blaze - Model 6 - 26 kW - Rotary Pellet Burner

    Output: 6 - 26 kW. Diameter of the furnaces (SP): 100 mm. Mounting diameter (SZ): 129 mm. Length of the combustion chamber (A): 207 mm. Power supply: 230 VAC, 50 Hz (6 A). Average power consumption: 50 W. Igniter’s power: 150 W. Fuel: Pellets  6-8 mm, length 3.15-40 mm, granules*. Output modulation: YES. Regulation of dividing primary ...

    By Blaze Harmony s.r.o. based in Lipník nad Bečvou, CZECH REPUBLIC. from Pellet Burner Product line

  • BLaze - Model 4 - 16 kW - Rotary Pellet Burner

    Output: 4 - 16 kW. Diameter of the furnaces (SP): 80.9 mm. Mounting diameter (SZ): 108 mm. Length of the combustion chamber (A): 183 mm. Power supply: 230 VAC, 50 Hz (6 A). Average power consumption: 20 W. Igniter’s power: 150 W. Fuel: Pellets 6-8 mm, length 3.15-40 mm, granules*. Output modulation: YES. Regulation of dividing primary and ...

    By Blaze Harmony s.r.o. based in Lipník nad Bečvou, CZECH REPUBLIC. from Pellet Burner Product line

  • Severe and High Temperature Corrosion

    At metal temperatures higher than 350°C with high chlorine percentage in the fuel gas, catalytic corrosion of carbon/low alloy steel can reach metal wastages of > 2 mm/year.

    By Flame Spray SpA based in Roncello, ITALY. from Waste Burners Product line

  • Model PV20a and PV30a - Pellet Burners

    Pellet burners PV20a and PV30a are designed to heat small and medium-sized residential and public buildings. For attaching pellet burner to a boiler’s door an ordinary oil burner flange is used. That makes replacing of the oil or gas burner with more modern and environment-friendly pellet burner fast and effortless. Unique electrical ...

    By Pelltech OÜ based in Harjumaa, ESTONIA. from Pellet Burners Product line

  • Conventional (CRG) Burner

    In a Conventional burner, the fuel and air needed for combustion are mixed in the throat of the burner where ignition and oxidation reaction occurs. There is a single flame zone. In contrast, Low NOx burners typically use multiple flame zones.

    By Callidus Technologies - part of UOP, a Honeywell Company based in Tulsa, OKLAHOMA (USA). from Callidus Burners Product line

  • WiseHeatR Energy Recovery Furnace

    EPA Approved Method — WiseHeatR meets EPA regulation 40 CFR #279.1(c) allowing the burning of on-site mixtures of oil and other materials (such as used oil filters, rags and sorbent materials) when used for energy recovery. WiseHeatR is more than a furnace. It is an environmentally intelligent way to burn used absorbent materials, and other ...

    By SkimOil Inc. based in Carrboro, NORTH CAROLINA (USA). from Incinerators - Burners Product line

  • MultiBio - Model 25 - Pellet Burner

    Advantages of MultiBio 25 kW Burner: Multibio Burner combust either wood pellets, or sintering agricultural fuels. Automatic heating, ecologic environmentally friendly operation.

    By Petrojet Trade s.r.o. based in Rakovník, CZECH REPUBLIC. from MultiBio Burners Product line

  • Dumag - Model LZB - Lance Burner

    Support or additional burner attached at the combustion chamber. Without ignition function and optional flame monitoring. Gaseous or liquid media. Individual design possible. Rotary kiln.

    By CTP-DUMAG GmbH based in Gumpoldskirchen, AUSTRIA. from Industrial Burners Product line

  • NATCOM - Utility Burner

    Years of experience and expertise allow NATCOM to meet the rigorous standards of the utility industry. Our proven Utility Burner systems provide solutions for new emissions requirements, fuel conversions, and retrofit upgrades in industrial, utility, and power boiler facilities.

    By Cleaver-Brooks based in Thomasville, GEORGIA (US) (USA). from Industrial Burners Product line

  • ULMA - Model Eco 60 kW - Biomass Pellet Burner

    The burner is designed to withstand overpressure and comes as standard with a new type of back draft protection. The burner can be run between 20-60 kW and has 5 power levels. It has an internal screw built in and features our reliable ignition element. Now also as standard with our new touch screen display with many useful features. With a ...

    By Ulma AB based in Svenljunga, SWEDEN. from Pellet Burner Product line

  • Model 675 Series - Turbo Gas Booster

    This range of quiet running Turbo gas boosters are available in 1, 2, 3, 4 and 5 stage forms and have been developed to run continuously under full load conditions delivering a wide variety of gases at reasonably high pressures. The shaft is sealed to isolate the bearings when boosting landfill or biogas. Standard machines have aluminium housing, ...

    By Utile Engineering Co. Ltd. based in Northants, UNITED KINGDOM. from Gas Burners Product line

  • Fuel Cell System Oxidizer

    The rapidly advancing fuel cell industry is persistently striving to become safer, less costly, and more efficient each day. PCI is supporting that mission with our unique burner technology. We are helping to pioneer fuel cell development by adapting our innovative burners to effectively complement emerging advances in the field.

    By Precision Combustion, Inc. (PCI) based in North Haven, CONNECTICUT (USA). from Burners/Oxidizers Product line

  • Model 030B0010 - Standard Oil Nozzles

    Standard oil nozzles with conical housing for oil burners for light and heavy oil.

    By Danfoss A/S based in Hasselager, DENMARK. from Burner Components Product line

  • Stirling Engine Burner

    PCI is developing novel catalytic burners for Stirling engines. External combustion engines, like the Stirling engine, have benefits over their internal combustion counterparts due to their ability to remain completely sealed from the elements and their nearly silent operation. Stirling engines are inherently robust, quiet, and only require an ...

    By Precision Combustion, Inc. (PCI) based in North Haven, CONNECTICUT (USA). from Burners/Oxidizers Product line

  • ULMA - Model Eco 2 Premium (30 kW) - Pellet Burner

    Despite the low price we manufacture the burner entirely in our own factory in Sweden Ulma Eco 2 is a reliable and robust burner with a proven igniter that ignite fast and is long lasting. The burner is equipped with an advanced control unit that controls combustion so that good operating economy is achieved. The burner can run from 6-30 kW. We ...

    By Ulma AB based in Svenljunga, SWEDEN. from Pellet Burner Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you