Burner Design Equipment
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Free-Jet burner is a Next Generation emissions flat flame burner. The picture (right) is Zeeco’s GLSF Free-Jet flat flame burner in operation at our test facility in Broken Arrow, Oklahoma. The Free-Jet burner design is able to achieve great NOx emissions and heat flux profile. Wall-fired and ...
-
Manufactured by PBS Power Equipment, s.r.o.based in CZECH REPUBLIC
burners are specific category of burner utilized in the refining, reforming, and petrochemical processing industry to provide energy to fluids in a specific process within the plant. It is the custom manufacturing with design according to specific requirements of the application submitted by the ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Min-Emissions Enhanced Jet burner is an Ultra-Low emissions flat flame burner.The picture (right) is of Zeeco’s GLSF flat flame burners in operation in an ethylene cracking furnace. The design allows for flat flame burners to achieve a great heat flux profile without flame rollover. A major advantage is that ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Mini-Emissions burner is an Ultra-Low emissions round flame burner.The picture (right) is Zeeco’s GLSF Min-Emissions down-fired burner firing with Refining Fuel Gas in the outer tips and PSA gas in the center tip. This design provides a flame shape that is normally the same width as the outside diameter of the ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco CLSF Min-Emissions burner is an Ultra-Low NOx emissions round flame combination burner.The picture (right) is Zeeco’s CLSF Min-Emissions combination burner in operation. The reduced NOx emission from oil firing is achieved by “Pseudo Staging” of oil by our CB oil gun design. The result is a burner that ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Free-Jet burner is a Next Generation emissions round flame burner.The picture (right) is Zeeco’s GLSF Free-Jet down-fired burner firing at our Combustion Test Facility located in Broken Arrow, Oklahoma. This design offers up to 90% NOx reduction as compared to conventional burner designs. ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco CLSF Free-Jet burner is a Next Generation emissions round flame combination burner.The picture (right) is Zeeco’s CLSF Free-Jet combination burner in operation at our combustion test facility. This design offers state-of-the-art NOx reduction for combination oil and gas firing. NOx reduction for gas firing is achieved by the ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Min-Emissions burner is an Ultra-Low emissions round flame burner.The picture (right) shows Zeeco’s GLSF Min-Emissions round flame burners in operation .The design allows for a compact flame shape which is basically the width of the burner tile making Zeeco’s burners a great choice for ...
-
based in USA
Gillespie + Powers, Inc. has designed and supplied a full range of tilting furnaces in metal capacities up to 240,000 pounds. The design of tilting furnaces, tilting holding furnaces, and tilting combination furnaces range from the simple single burner design to the elaborate multi-burner regenerative style ...
-
Manufactured by International Combustion Equipment Srl (I.C.E.)based in ITALY
The I.C.E. “SF” (Staged fuel gas only burners) burner design started in the late 90’s as an answer to market request of low NOx burners, suitable to meet pollutant emissions ...
-
Manufactured by Tryacbased in UNITED KINGDOM
The Heat wave atmospheric burner can be supplied in sizes from 1 million btu's to 4 million btu's. This burner is designed for drying grain or onions and comes complete with a modulating controller to maintain the pre set duct ...
-
Manufactured by Jing Ltd.based in SWITZERLAND
The HiMass CAST burner is an exemple for free scaling the CAST-based burner. Based on the requirments of customer the CAST burner can be designed for nearly every flow rate and particle number and mass ...
-
Manufactured by Jing Ltd.based in SWITZERLAND
The miniCAST burner is designed as a compact device with an integrated ignitor and a sight glas for observing the flame state. The burner can be used either for low cost soot generator with lower precision or in combination with external flow or pressure controller for calibration ...
-
Manufactured by Eclipse, Inc.based in USA
Blast Tips are small burners designed to handle combustible mixtures of gas and air under sufficient pressure to cause a blast-like flame. In general, Blast Tips are built to burn without the use of any refractory tunnel and are either self-piloting or built to prevent the flame from blowing away under normal conditions of operation. Blast ...
-
Manufactured by FlammaTec, spol. s r.o.based in CZECH REPUBLIC
In 2020, FT introduced in 2020 the NEW Hydrogen Carbon Free burner as a response to environmental challenges to reduce the CO2 footprint dedicated to glass industry applications. The FT Hydrogen/Oxygen CF burner was designed and developed by a joint team of German and Czech FlammaTec engineers, together with the simulation department of ...
-
Manufactured by B-max Technologybased in ITALY
Low-power burner, designed for civilian buildings. It is equipped with a screw pump for ...
-
Manufactured by Selnikelbased in TURKEY
These burners are able to burn all kind of various sizes technical fuels such as natural gas, biogas, LNG, CNG, LPG between 250 kW and 30.000 kW, and highly efficient.In these burners being designed separately from the casing, so that fine-adjusting can ce achieved depending on ...
-
Manufactured by Eclipse, Inc.based in USA
ThermJet Self-Recuperative Burners Combine a High Velocity Flame with Fuel Saving Recuperation. The low NOx TJSR V5 is a direct fired, self-recuperative burner built with Eclipse's industry proven ThermJet technology. Featuring advanced burner design, these burners combine a high velocity flame with fuel saving ...
-
Manufactured by Infratech Corporationbased in CANADA
Infratech gas waste incinerators and thermal oxidizers are designed to meet applicable emission and ground level concentration regulations. Our designs ensure a predictable Destruction Efficiency and substantially reduced auxiliary fuel consumption requirements. Our continuous duty gaseous waste incinerators/oxidizers are designed to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you