Only show results available in Virginia? Ok

burner firing equipment

  • Premium

    ACME - Model GS Series - Gas Fired Steam Superheaters

    ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Gas Fired Steam Superheaters Product line

  • ThermJet - Fire Burners

    ThermJet Direct Fire Burners Feature the Highest Flame Velocities Available. The industry standard for velocity burners, the low NOx ThermJet represents a technological leap forward in every area of design and performance. Comparison tests show that ThermJet delivers the lowest emissions of any competitive model. Integrated gas and air orifices ...

    By Eclipse, Inc. based in Rockford, ILLINOIS (USA). from Fire Burners Product line

  • FIRE - Infra Red Space Heaters

    Direct heat flow by radiation with no movement of air. Low noise level. Dedicated BM2 burner with standard UE components. Geared fuel pump. lectronic flame control with photoresistance sensor. Possibility of interface with thermostat,humidistat or timer. Power cord (1,5 m) with plug. AISI 430 stainless steel combustion chamber. Outer cover cooled ...

    By Biemmedue S.p.A. based in Cherasco CN, ITALY. from Infra Red Space Heaters Product line

  • COOLstar - Burner

    The COOLstar burner is an advanced solution for very compact, ultra-low NOx gas firing applications. Thousands of COOLstar burners are in service today because of its proven performance.

    By John Zink Company, LLC based in Tulsa, OKLAHOMA (USA).

  • Eurotherm - Burner

    When short, uncomplicated planning and commissioning is important for standard applications or compact process firing systems (for example support firing systems with waste incineration plants), your first choice is the SAACKE EUROTHERM series of pressure atomizers. With an integrated fan, optimized air flow and integrated fuel fittings, these ...

    By SAACKE GmbH based in Bremen, GERMANY. from Burner Product line

  • TEMINOX - Model GLS - Burner

    There are different ways to guarantee a permanent low emission level. The TEMINOX GLS pressure atomizer series offers what is probably the most effective way. Burners of this series are available either as monoblock or duoblock burners and have been optimized in every detail to ensure low-pollution combustion. It does not matter which version is ...

    By SAACKE GmbH based in Bremen, GERMANY. from Burner Product line

  • Webb Burner - Biomass Solid Fuel Combustion Systems

    Jacksonbegan selling Webb Burners over ten years ago, to answer the need for a more economical way of drying wood shavings. Now, in cooperation with inventor and physicist W. B. Webb, we manufacture a complete line of biomass burners available in sizes up through 60 million BTU/hr. These cyclonic suspension burners are ideal for generating large ...

    By Jackson Lumber Harvester Company, Inc. based in Mondovi, WISCONSIN (USA).

  • Model S-119 - Fire Fox Burner

    General: A self-contained, completely assembled above ground Air Curtain Burner (air curtain incinerator or FireBox) with a refractory lined burn-container for portable and permanent (stationary) applications. Designed for the high temperature burning of forest slash, land clearing debris, green waste, storm debris, and other waste streams in ...

    By Air Burners, Inc. based in Palm City, FLORIDA (USA). from Fire Fox Burner Product line

  • Model S-111 - Fire Box Burner

    General: A self-contained, completely assembled above ground Air Curtain Burner (air curtain incinerator or FireBox) with a refractory lined burn-container for portable and permanent (stationary) applications. Designed for the high temperature burning of forest slash, land clearing debris, green waste, storm debris, and other waste streams in ...

    By Air Burners, Inc. based in Palm City, FLORIDA (USA). from Fire Box Burner Product line

  • Detroit - Co-Fired Burner

    Enhance performance of existing solid fuel grate-fired combustion systems. Includes Startup & Auxiliary function. Gain fuel switching flexibility.  Increase efficiency. Improve load swing response. Lower operating costs. Recover boiler derate. Resolve emissions problems.

    By Detroit Stoker Company based in Monroe, MICHIGAN (USA). from Co-Fired Burner Product line

  • Model S-116 - Fire Box Burner

    General: A self-contained, completely assembled above ground Air Curtain Burner (air curtain incinerator or FireBox) with a refractory lined burn-container for portable and permanent (stationary) applications. Designed for the high temperature burning of forest slash, land clearing debris, green waste, storm debris, and other waste streams in ...

    By Air Burners, Inc. based in Palm City, FLORIDA (USA). from Fire Box Burner Product line

  • Detroit - Vertical Fired Burner

    Detroit Vertical Fire Technology utilizes a single, upward-firing burner in the furnace floor to eliminate the risk of flame impingement on boiler water walls. This lets a single burner provide the input capacity of several front or side wall burners. Multiple gas trains and complex burner management systems are eliminated. Heat transfer to water ...

    By Detroit Stoker Company based in Monroe, MICHIGAN (USA). from Vertical Fired Burner Product line

  • GLSF FREE - Model JET - Down-Fired Gas Burner

    The Zeeco GLSF Free-Jet burner is a Next Generation emissions round flame burner.The picture (right) is Zeeco’s GLSF Free-Jet down-fired burner firing at our Combustion Test Facility located in Broken Arrow, Oklahoma. This design offers up to 90% NOx reduction as compared to conventional burner designs. Dual fuel connection versions and ...

    By Zeeco, Inc. based in Broken Arrow, OKLAHOMA (USA). from Down-Fired Gas Burner Product line

  • Model 310 - Tube Firing Burner (TFB)

    Eclipse low emissions TFB burners are designed to fire radiant and immersion tubes with inputs from 300,000 to 2,000,000 Btu/hr. With a vigorous spinning action, the unique nozzle design creates an intense adjustable length flame. This long, spiraling flame results in cleaner combustion, efficient heat transfer and more precise, uniform tube ...

    By Eclipse, Inc. based in Rockford, ILLINOIS (USA). from Tube Firing Burner (TFB) Product line

  • Monoblock Burner

    Oil / Gas burner with blower in Monoblock construction form with digital firing management up to 16 MW.

    By K├Ârting Hannover AG based in Hannover, GERMANY. from Monoblock Burner Product line

  • ITAS - Process Burners

    Installed with a fired heater, a cracker furnace or a reformer, process burners are a critical element in the refining and petrochemical processes. Whatever the application, the technical requirements or project specifications, Fives designs and supplies a complete range of ITAS process burners, from engineering design to site assistance and ...

    By Fives Group based in Paris, FRANCE. from Process Burners Product line

  • Industrial Burners

    We specialize in low calorific value gas burners, burners are available for blast furnace gas, producer gas, mixed gas; synthetic gas both direct fired and regenerative burner. Biogas fired boiler burner can be supplied ex-stock. We also produce special burners for client including incinerator burner with large heat output. Refurbishing , start-up ...

    By Puti Energy based in Bhosari, INDIA.

  • ITAS - Process Burners

    Installed with a fired heater, a cracker furnace or a reformer, process burners are a critical element in the refining and petrochemical processes. Whatever the application, the technical requirements or project specifications, Fives designs and supplies a complete range of ITAS process burners, from engineering design to site assistance and ...

    By Fives I.T.A.S. s.p.a. based in Monza, ITALY. from Process Burners Product line

  • Incini - Cone Burner

    Incini-Cone burners are designed for fume incineration and the after-heating of exhaust from turbines, dryers, ovens and similar equipment. The burner is mounted in the exhaust duct and requires the exhaust stream to supply all of the oxygen needed for complete combustion. Burner assemblies include the burner body, gas or oil gun, gas pilot with ...

    By Eclipse, Inc. based in Rockford, ILLINOIS (USA). from Cone Burner Product line

  • Callidus - Premix Burner

    In a Premix burner, the fuel and air needed for combustion are drawn together and mixed prior to discharge from the burner tip.

    By Callidus Technologies - part of UOP, a Honeywell Company based in Tulsa, OKLAHOMA (USA). from Premix Burner Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you