Refine by
Burner Lance Equipment & Supplies
18 equipment items found
Manufactured by:Smitsvonk Holland B.V. - a member of the Durag Group based inZoetermeer, NETHERLANDS
Ignition and burner control for ignition burners, pilot burners lances and spark ...
Manufactured by:Smitsvonk Holland B.V. - a member of the Durag Group based inZoetermeer, NETHERLANDS
Ignition and burner control for ignition burners, pilots burners, lances and spark ...
Manufactured by:Lamtec GmbH & Co.KG based inWalldorf, GERMANY
Burner control Electronical compound, up to 5 channels. Universal field bus to interface process control. PC/Modeminterface. Integrated load controller. Integrated leakage test. Integrated CO/O2 controller. Sliding controlled fuel changed. Simultaneous combustion of 2 fuels with variable mixture ratio. Blow out of the burner ...
Manufactured by:SCCM ALP based inCOGNIN, FRANCE
The top wall of the tank is equipped with a door for deslagging operations and openings for the passage of oxygen lances, oxyfuel burners or coal lances. The design of a tank top must take into account : The geometrical constraints for the installation of this auxiliary equipment. The multiple stresses to which the cooled elements are exposed ...
Manufactured by:Smitsvonk Holland B.V. - a member of the Durag Group based inZoetermeer, NETHERLANDS
Ignition and control unit for[ pilots burners and lances for ...
Manufactured by:ENETEX GmbH based inSteinau a. d. Str., GERMANY
The ENETEX burner is a special innovation for TOS and COS systems and air heaters. The oxygen required for combustion is taken directly from the preheated exhaust gas or from the process air before heating. The temperature-resistant design and special formation of the fuel lance and burner basket are responsible for the long service life of our ...
Manufactured by:Körting Hannover AG based inHannover, GERMANY
Parallel-flow lance burners for use at melting pots in the glass industry where stricter emission demands are to be ...
Manufactured by:Körting Hannover AG based inHannover, GERMANY
Lance burners for use at melting pots in the glass industry. Fuels: fuel oils EL, M or S acc. to DIN ...
Manufactured by:Körting Hannover AG based inHannover, GERMANY
Lance burners for use at melting pots in the glass ...
Manufactured by:Dumag GmbH based inGumpoldskirchen, AUSTRIA
DUMAG has designed and built a great many customized burner systems for the installation in rotary kiln applications on a global basis. DUMAG burner equipment is specially designed for the treatment of industrial and hazardous waste in rotary kiln with post-combustion chamber. The all-round burner DUMAG IB-rksc features an individual swirl for flame length adjustment and the simultaneous ...
Manufactured by:HORN Glass Industries AG based inPlössberg, GERMANY
Due to its high flexibility and its low energy consumption the regenerative end fired furnace is the working horse of the glass industry. Most mass produced glass products such as bottles and containers of all kind, tableware and glass fibre can be produced with a minimum of fossil fuel firing and thus carbon dioxide emission. Its typical melting capacity is 30 – 500 t/d, in some cases up ...
by:CT Industrial Oy based inHaapavesi, FINLAND
The PL burner operates with liquid fuel and uses atomizing air or steam for low NOx combustion. This burner can be equipped with optionally retractable protection - automatically closing hatches. Burner is suitable for heavy and light fuel oils, various bio oils, waste liquid. Standard capacities can be proposed in range of 5-50 MW. ...
Manufactured by:Zeeco, Inc. based inBroken Arrow, OKLAHOMA (USA)
The Zeeco GLSF Free-Jet burner is a Next Generation emissions flat flame burner. The picture (right) is Zeeco’s GLSF Free-Jet flat flame burner in operation at our test facility in Broken Arrow, Oklahoma. The Free-Jet burner design is able to achieve great NOx emissions and heat flux profile. Wall-fired and free-standing ...
Manufactured by:GEFA System AB based inGÄLLIVARE, SWEDEN
The Arctic Heat burner system improves fuel economy and reduces NOx in the exhaust. Arctic Heat can help bring economical and environmental benefits to your heating industry. Our customers often highlight the fact that they’ve experienced decreased fuel cost, less unburnt fuel and less NOx in the exhaust since they installed our burners. Arctic Heat is being used within industrial ...
Manufactured by:IBS Industrie-Brenner-Systeme GmbH based inHagen, GERMANY
CONEFIRE - process burners are available from 100 kW for gaseous and liquid heating fuels as well as dual-fuel burners. CONEFIRE process burners are having a wide turn-down of 40:1 (near- stoichiometric 10:1). Due to their reliability and low-emission combustion, CONEFIRE® process burners have become a first choice burner for plate dryers, drying furnaces and post-combustion ...
Manufactured by:Smith Cast Iron Boilers based inWestfield, MASSACHUSETTS (USA)
The Smith GBX gas-fired residential boiler is designed to provide dependable, efficient heat. Appreciated for its simplicity and relatively rare need for routine service, the GBX is available in 5 sizes ranging from 70 to 195 MBH with efficiencies of up to 82% ...
Manufactured by:Smith Cast Iron Boilers based inWestfield, MASSACHUSETTS (USA)
The GVX gas-fired residential boiler combines application flexibility with high efficiency. The power vent feature positively vents the flue gases outdoors which provides safe, dependable operation. The GVX is available in 4 sizes ranging from 70 to 165 MBH with efficiencies of up to 82% ...
Manufactured by:HORN Glass Industries AG based inPlössberg, GERMANY
Recuperators for small furnaces, i.e. up to 80 t/d are double shell recuperators. For melting capacities between 100 to 450 t/d tube bundle recuperators are used. The air preheating output of recuperators is far below the output of regenerators. That is why the energy consumption of a furnace with recuperators is relatively high. An advantage, however, is the higher flue gas temperature enabling ...