Burner System Equipment In Latin America
-
Manufactured by Dunphy Combustion Ltd.based in UNITED KINGDOM
range of low NOx, ultra low-NOx and next-generation process burner systems that meet the ever growing European NOx expectations and achieve exceptional turn down ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec 244W Series is a highly reliable flare and ignition system. It utilizes a patented pilot ignition system that mixes pilot gas and air at ground level to provide a robust, high temperature pilot. The pilot is ignited away from the flare stack. This reduces wear and tear and allows routine maintenance to be carried out without ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec 239A Series Waste Gas Burner is designed for burning biogas generated in the anaerobic digestion process. Burning or flaring to the atmosphere reduces the potential odor nuisance from venting directly to the atmosphere. This burner is suitable for burning low volumes of biogas, which is typically very 'wet', with a low BTU value ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
Our in-house EI&C department will gladly take over the technical planning and design of the required instrumentation for your burner system. CS supplies everything from loose fittings to fully piped, frame-mounted fuel control stations. We use products of the highest standards from our valve and measurement technology partners, or ...
-
Manufactured by Dunphy Combustion Ltd.based in UNITED KINGDOM
A boiler control panel incorporating a touch screen and digital burner management system to display and control a variety of burner/boiler ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec Biogas 244E Enclosed Burner Systems are designed to burn biogas efficiently and safely over a wide range of operating parameters. With no visible flame, the 244E systems use an innovative stack design to naturally induce the proper amount of combustion air which guarantees high destruction removal ...
-
Manufactured by D`Alessandro Termomeccanicabased in ITALY
Cast iron burner with mechanical feeding system; Hopper for the combustible material; Variable speed screew for automatic feeding; Primary and secondary combustion air system; Voltage: 230 V up to 120 kW, 400 V from 130 kW up to 2400 ...
-
Manufactured by D`Alessandro Termomeccanicabased in ITALY
Cast iron burner with mechanical feeding system; Cylindrical combustible feeding hopper with mechanical stirrer; Variable speed screew for automatic feeding; Primary and secondary combustion air system; Fire-fighting system; Voltage: 230 V up to 120 kW, 400 V from 130 kW up to 2400 ...
-
Manufactured by Clayton Industriesbased in USA
servo actuated burner management ...
-
Manufactured by D`Alessandro Termomeccanicabased in ITALY
Smoke circuits boiler type “Marine” with water production for heating; Boiler shell in steel; Doors for internal inspections and boiler cleaning; Cast iron burner with mechanical feeding system; Hopper for the combustible material; Variable speed screew for automatic feeding; Primary and secondary combustion air system; Rotary ...
-
Manufactured by D`Alessandro Termomeccanicabased in ITALY
deflection; Frame in steel with refractory material; Cast iron burner with mechanical feeding system; Hopper for the combustible material on right, left or back side (to be specified at the moment of the order); Variable speed screew for automatic feeding; Electric fun for combustion air; Rotary valve (to prevent smokes return into the hopper); Voltage: ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Momentum Biogas series of elevated flares is our most economical line of combustion equipment for the biogas sector, offering a cost-effective solution with rapid delivery. Momentum flares utilize a specially designed “burner and shroud” system to manage the intricate mixing with ambient air to provide a high DRE (98%) and ...
-
Manufactured by Dunphy Combustion Ltd.based in UNITED KINGDOM
Dunphy bespoke or standard burners are key components of high efficiency, low emission waste to energy bio gas systems. Our burners are ideal for standard incineration, bio gas and bio fuel heat and steam generation. We have international experience in designing and customising axial air flow, box and utility burners to match ...
-
Manufactured by Fives Groupbased in FRANCE
Installed with a fired heater, a cracker furnace or a reformer, process burners are a critical element in the refining and petrochemical processes. Whatever the application, the technical requirements or project specifications, Fives designs and supplies a complete range of ITAS process burners, from engineering design to site ...
-
Manufactured by Clayton Industriesbased in USA
The SigmaFire line is available in sizes of 25 ,35, 50, 75, 100, 125, 150 and 200 BHP (245 to 1,962 kW) and has been designed from the ground up to offer an extensive list of benefits. Greatly Reduced Time and Expense for Installation. This is a result of modular construction of the main components—the Steam Generator, the Feedwater Tank and other Feedwater Equipment. Each of these ...
-
Manufactured by Dunphy Combustion Ltd.based in UNITED KINGDOM
Dunphy has developed a range of solutions for safe and efficient co-firing of fossil fuels, liquid bio fuels and gaseous fuels derived from recovered waste ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
As an alternative to recovery, hydrocarbon vapors may be destroyed in a flare, combustor or a thermal oxidizer. For many applications, a device known as a combustor can be successfully used as a safe and economical method of controlling vapors from the handling, storage or loading of volatile liquid hydrocarbons or ethanol when recovery of the vapors is not a viable ...
-
Manufactured by Zeeco, Inc.based in USA
Zeeco’s Free Jet power burners use our patented technology that adds fuel staging to the proven Venturi design and free jet mixing theory, reducing emissions in some applications to as low as single-digit numbers. With Free Jet power burners already hard at work in the refining, petrochemical, power, LNG, municipality, pulp and ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control within the biogas and wastewater industries. Additionally, each ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's halogenated thermal oxidizer systems are designed to handle hazardous halogenated streams produced from various chemical processes in a safe and effective manner. Systems are designed to maintain high destruction efficiency of the compounds with an effective high chamber temperature and residence ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you