Only show results in Connecticut? Ok

burner temperature equipment

  • Premium

    ACME - Model GS Series - Gas Fired Steam Superheaters

    ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Gas Fired Steam Superheaters Product line

  • Premium

    Direct Fired Oxidisers

    A direct fired oxidiser is effectively a combustion chamber with suitably designed burner. The exhaust temperature from a direct fired unit is typically the same as the combustion chamber temperature. This type of oxidiser is, therefore, normally only used where fuel is free or where the inlet concentration of the airstream to be treated is very ...

    By Environmental Integrated Solutions (EIS) based in Rochdale, UNITED KINGDOM. from Direct Fired Oxidisers Product line

  • Premium

    NOXmatic / NOXmatic NANO - Automatic Gas Flare

    Our core business is the most up-to-date quality gas flare technology for a safe, efficient and environmentally friendly combustion of gases from landfill, bio and sewage gas systems. Our fully automatic flare NOXmatic with its extensive range of accessories can be suited for every low and medium temperature combustion application. With various ...

    By ennox biogas technology GmbH based in Hard, AUSTRIA. from Automatic Gas Flare Product line

  • Caustic and Caustic Rinse Tanks

    The tanks are constructed of 1/4' mild steel plate and are reinforced at the lip with steel channel and at the girth with angle. In addition, the lower portion of the sidewall and the bottom are reinforced with T bar and/or I beam. The tanks are heated by immersion tube burners fabricated of schedule 40 steel pipe and fired with atmospheric type ...

    By GTI Engineering Inc. based in Katy, TEXAS (USA). from Caustic and Caustic Rinse Tanks Product line

  • Coal Burner Tilt Nozzle and Seal Plate

    Fabricated from a customers sample, ARS is able to improve product life by upgrading to 309 stainless steel. The part, while in service, showed less wear and warpage under extreme temperatures. Tight square to round transition of corners indicate forming capabilities.

    By Abrasion Resistant Specialties based in Cleveland, OHIO (USA). from Coal Burner Tilt Nozzle and Seal Plate Product line

  • Holder and Reservoir

    Gillespie + Powers, Inc. is active in the design of aluminum holding furnaces, both stationary and tilting-type furnaces, incorporating proprietary features for the maintenance of metal temperature within customer requirements of usually ±5˚F. Furnace features may include burner selection, burner placement, pulse firing, molten metal ...

    By Gillespie + Powers, Inc. based in St. Louis, MISSOURI (USA).

  • CONFORT - Cabinet Space Heaters

    Automatic oil burner. Electronic flame control. Built-in room thermostat (+5°/+30° C). Centrifugal fan. FAN-LIMIT bi-thermostat with manual reset. Air outlet head with adjustable louvres, revolving at 360°. Power cord (3 m) with plug. 65 litre fuel tank. Double skinned body for thermo-acoustic insulation and safe low surface ...

    By Biemmedue S.p.A. based in Cherasco CN, ITALY. from Cabinet Space Heaters Product line

  • Model S-116 - Fire Box Burner

    General: A self-contained, completely assembled above ground Air Curtain Burner (air curtain incinerator or FireBox) with a refractory lined burn-container for portable and permanent (stationary) applications. Designed for the high temperature burning of forest slash, land clearing debris, green waste, storm debris, and other waste streams in ...

    By Air Burners, Inc. based in Palm City, FLORIDA (USA). from Fire Box Burner Product line

  • Tornum - Model HRC - Continuous Heat Recovery Grain Dryer

    Heat Recovery Dryer HRC saves energy without any capacity losses. The HRC dryer use the energy that would be lost in a traditional grain dryer. Up to 10 percent of the heat is recovered.  The design also provides a quieter and cleaner work environment. As all Tornum grain dryers, the HRC model is made from hot-dip galvanized sheet steel. ...

    By Tornum AB based in Kvänum, SWEDEN. from Continuous Heat Recovery Grain Dryer Product line

  • APEc - Model 351 - High Pressure Centrifugal Fan

    High-pressure centrifugal fan like AP. Coupling by means of belts.Use: also for the suction of very dusty air. The fans of this series are particularly suitable for pneumatie conveyances, in cement factories, in the air feeding of the cupolas, in foundries and in oil burners, in mills, in “pasta” factories, in chemical, metallurgical ...

    By Euroventilatori International Srl based in San Pietro Mussolino VI, ITALY. from High Pressure Centrifugal Fan Product line

  • Standard Ground Flare Burner Systems

    The standard burner is normally used on applications where flame retention time and temperature are not so critical. Typically on this type of burner the size remains constant and quantity increases depending on the gas flow rates.

    By Flare Products Limited based in Stewartby, UNITED KINGDOM. from Standard Ground Flare Burner Systems Product line

  • Kaiyuan - Model LZC - LZC Pure Steam Generator

    1.Fully drainable 2.Zero dead legs (as far as technically possible) 3.All connections, sealing’s etc. free of unnecessary gaps corners etc. 4.Gasket material temperature resistant up to 130 ℃ and FDA certified. 5.Pipe connection of sterile design. 6.Corrosion safe design. 7.System should be ...

  • Online Burner

    Another challenge for PM or DeNOx emission reduction technologies is to find applications where the exhaust gas temperature reaches the minimum required level for their functioning. From the retrofit experience, it has become clear the customers require that our burner technology is compatible with an online version.

    By HUSS Technologies GmbH based in Palm Desert, CALIFORNIA (USA).

  • Fueled Heaters

    Over a heating output of around 500 kW, it is usually more efficient to use fueled heaters, especially if the customer has gas or oil available. Alongside the tried-and-tested electric heaters, LAUDA now also uses fueled heating oil heaters, in order to create outputs of up to 30 MW. The gas and oil burners fit seamlessly into the LAUDA system ...

    By LAUDA Dr. R. Wobser GmbH & Co. KG based in Lauda-Königshofen, GERMANY. from Fueled Heaters Product line

  • Hamworthy - Model DR-PF - Dorchester Fully Automatic Power Flame Direct Fired Water Heater

    The Dorchester DR-PF range of power flame water heaters is suitable for the larger load requirements for hot water and consists of 7 models with continuous outputs ranging from 969 to 3241 litres/hour, based on a 44c temperature rise. Storage capacities range from 271 to 338 litres. Two or more water heaters can be installed ...

  • Model K-2-16 - Central Heating Solid Fuel Boiler

    Multipurpose bottom combustion solid fuel boiler. High efficiency (82%). Large fuel load (72 dm³). Fuel is loaded from the front or top. Automatic adjustment of boiler temperature. Secondary air supply. Secondary burning chamber with refractory concrete catalyst. Smoke exhaust, ignition and draught dampers. Fire grates shaking mechanism. Heat ...

    By Kalvis, JSC based in Siauliai, LITHUANIA. from Central Heating Solid Fuel Boiler Product line

  • Model HT - High Temperature Gas Flare

    The HT series flares are designed to offer a combustion temperature above 1000 °C and residency time longer than 0,3 s. This is to comply with the widely-applied German norm TA-Luft, in those case in which the flare is not just an emergency element, as well as in case of landfills and other complex and special gases.The HT features heat-resistant ...

    By Bilgeri EnvironTec GmbH based in Nüziders, AUSTRIA. from High Temperature Gas Flare Product line

  • ULMA - Model 2000 TCA 2 - Pellet Burner

    TCA 2 pellet burner can be mounted on most boilers on the market. The burner is provided with a superior controller that handles monitoring, security and controls the combustion. The burner is lit using a hot air element when boiler temperature is less than the preset thermostat setting. Adjustable hysteresis of the thermostat via the controller ...

    By Ulma AB based in Svenljunga, SWEDEN. from Pellet Burner Product line

  • Central Heating System

    With the popularization of solar technology, solar water heating system has become the alternative products of many schools, hotels, hospitals and high –leveled communities,industrial and mining enterprises to replace the traditional boiler .so as to save energy and improve the environment .At the same time, the project can also be carried ...

  • Rack-Style Suspension Burner

    The Rack-Style Suspension Burner is designed to feed whole tyres onto a high-temperature alloy Suspension Rack – also known as the “fork” or “fingers” – which enables the tyre to remain in suspension while burning inside the walls of the calciner.  Typically placed above the tertiary air duct, ample oxygen ...

    By AFS Technology based in Ansonia, OHIO (USA). from Rack-Style Suspension Burner Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you