Refine by
Applications
- Combustion Technology for Alternative Combustibles
- Combustion Technology for Exhaust Gas and Air Combustion
- Combustion Technology for Hot Gas Production
- LowNOx Systems for Nitrogenous Fuels
- Burners and combustion solutions for steel industry
- Burners and combustion solutions for biogas plants sector
- Industrial Process Heating for Numerous Applications
- Waste air combustion for municipalities
- Incinerator solutions for the hotel / resort sector
- Li-ion battery electrode manufacturing
- Incinerators for Flue gasses and human health damage
- Heater and Generators Solutions for Textile Industry
- Incinerator for Industry Waste - Household waste Incinerator Accurate Power
- Incinerator for Slaughter Waste
- Process heating for commercial and industrial functions
- Solid Recovered Fuel (SRF) for the cement industry
- Air combustion for chemical plants
- Measurement Systems for Power Industry
- Environmental solutions for the waste incineration industry
Burners Equipment & Supplies
1,925 equipment items found
Manufactured by:Jing Ltd. based inZollikofen, SWITZERLAND
The HiMass CAST burner is an exemple for free scaling the CAST-based burner. Based on the requirments of customer the CAST burner can be designed for nearly every flow rate and particle number and mass ...
Manufactured by:Jing Ltd. based inZollikofen, SWITZERLAND
The miniCAST burner is designed as a compact device with an integrated ignitor and a sight glas for observing the flame state. The burner can be used either for low cost soot generator with lower precision or in combination with external flow or pressure controller for calibration ...
Manufactured by:CPK Automotive GmbH & Co KG based inMuenster, GERMANY
In many applications with difficult operating conditions the exhaust gas temperatures are not sufficient to run exhaust aftertreatment systems like Diesel Particulate Filters (DPF) or Selective Catalytic Reduction (SCR) effectively. A simple burner is often capable to increase the exhaust temperature and make the aftertreatment systems work in the effective temperature range. ...
Manufactured by:Limpsfield based inBiggin Hill, UNITED KINGDOM
The Limpsfield LP burner series are characterised by a monoblock structure that means all necessary components can be combined into a single unit, making installation and set-up easier and faster, whilst maintaining highly efficient ...
Manufactured by:Zakłady Maszynowe Hamech Sp z o.o. based inHajnówka, POLAND
AZZP-180 type burner is used to burn the following types of fuel: wood waste in form of wood chips, pellet, sawdust with moisture of 40%. Max. granulation of fuel is 30 mm. The device can cooperate with open system central heating boilers. Fuel from the tank is fed into the burner with ceramic lining by means of a driven worm conveyor. Fuel gasification takes ...
Manufactured by:ITI Engineering based inCremona (CR), ITALY
For fine size wood waste, suspended combustion systems have been developed, commonly and improperly called "burners". These combustion units are often present in our plants, since in the wood-based panels (industrial sector where we have been involved in technological development), the finishing process is constantly present, which has the result of very fine waste production of ...
Manufactured by:S.B Environmental Co, Ltd. based inZhucheng City, CHINA
Our incinerators use easy to use and start-up and excellent performance ratio burners.The latest technology and high quality from Italy CE certified burners used in our incinerators which cause high effective and high burn ...
Manufactured by:Agrofrost NV based inBrussels, BELGIUM
If we look at the excisting burners on the market, we notice several important disadvantages: there is only 1 burner that ejects hot air into the air at 1 point. This means that most of the time, the heated air is not in the center of the air stream of the fan. Therefore, more than 50 % of the energy is lost. So the efficiency is very poor. the ...
Manufactured by:WS Wärmeprozesstechnik GmbH based inRenningen, GERMANY
Even today, customers who rely on the REGEMAT® 250 are optimally equipped for all possible future developments. Especially since the burner has all 'Green Gas Ready' criteria with flying colors. Thanks to their use in recirculating double P-tubes, these systems are ideally prepared for the future of alternative fuels such as operation with green hydrogen. With well over 10 ...
Manufactured by:Zakłady Maszynowe Hamech Sp z o.o. based inHajnówka, POLAND
AZZP 50 type burner is used to burn fuel: wood waste in form of wood chips, pellet, sawdust with moisture of 40% and granulation of 30 mm and turf with moisture of 40%. It can cooperate with open heating system boilers. Fuel from the tank is fed into the burner with ceramic lining by means of a driven worm conveyor. Fuel gasification takes place in the ...
Manufactured by:Limpsfield based inBiggin Hill, UNITED KINGDOM
The Limpsfield LC burner series offers high efficiency burners ranging from outputs of 0.9MW to 31MW (3 – 110 MBtu/hr). All Limpsfield burners provide high turndowns typically between 4:1 and 10:1. This versatile range of burners can be tailor-made to suit any on-site requirements, and fire a vast range of ...
Manufactured by:WS Wärmeprozesstechnik GmbH based inRenningen, GERMANY
This can be the case, for example, if the furnace atmosphere does not permit operation of recuperator or regenerative burners, such as in substoichiometric operation or dusty and aggressive furnace atmospheres. So far, LUVOMAT® burners have been realized up to a thermal output of about 1 MW, but higher outputs are possible in principle. The requirements for ...
Manufactured by:Zakłady Maszynowe Hamech Sp z o.o. based inHajnówka, POLAND
AZZD-500 type burner is an automatic, maintenance-free device used to burn fuel in form of sawdust briquette with granulation of 60 mm and of 100-300 mm in length. It cooperates with central heating boilers for solid ...
Manufactured by:Power Flame Inc. based inParsons, KANSAS (USA)
Type C Burners are designed to fire a wide range of gaseous, as well as #2 or similar distillate fuels. Packaged Liquid Waste Fuel Burning systems, employing the basic design principles of the Type C dual fuel burner are also available. The Power Flame Model CGO dual fuel burner presents an optimum state-of-the-art design for maximum ...
Manufactured by:Power Flame Inc. based inParsons, KANSAS (USA)
Power Flame's NP2 Burner is our Ultra Low NOx solution with field proven Sub 9 to Sub 20 PPM NOx emission levels on a wide range of commercial, industrial and process applications. It utilizes premixed surface stabilized combustion all metal firing head for natural and L.P. gas. The burner relies on a patented, fully premixed surface stabilized ...
Manufactured by:Leverage Incorporated NV based inWaregem, BELGIUM
Burners using lean gas or residual gas generally comprise a number of coaxial ducts or pipes arranged to supply a ring or rings of fuels centred on the axis of the burner and feeding liquids to the burner nose. These fuels are generally distributed in or around the circumference of a combustion air stream. The purpose of these elements is to ...
Manufactured by:Blichmann Engineering, LLC based inLafayette, INDIANA (USA)
HellFire Burner Options: HellFire - Floor Standing (Basic Hellfire Burner). HellFire - 1BBL XL Version - Our HellFire™ XL Burner fits kettles up to 25"! Including our 55 Gallon BoilerMaker™ Kettles.There’s your everyday homebrew burner, and then there’s the HellFire™. As the best ...
Manufactured by:Elektro Dinamik Brox based in, TURKEY
More then 10.000 BROX burners & process burners with capacities from 50kw up to 41000kw, and more than 800 boilers with heating surface from 25m² uo to 350m² running in various ...
Manufactured by:Jing Ltd. based inZollikofen, SWITZERLAND
The image shows the 6. generation of the CAST burner since 1999. It consists of an upper and a lower part. Both form a combustion chamber with a stable flame without any further means. The flame can be initialed using a lighter through a opening. Soot particles are formed in the combustion chamber and quenched on the hight of the exhaust pipe ...
Manufactured by:CS Combustion Solutions GmbH based inWien, AUSTRIA
This burner works with oxygen instead of air. After commissioning with a support fuel such as natural gas or heating oil, this burner works with almost any combustible fuel. This process can be retrofitted without having to install a new burner block in the existing combustion chamber. ...