Refine by
Cable Fault Equipment & Supplies
38 equipment items found
by:AMR PEMCO, Inc. based inRocky Gap, VIRGINIA (USA)
The CD-710 Cable Fault Detector is a portable system for easy identification of opens or shorts in exposed cable runs. ...
Manufactured by:Megger based inDallas, TEXAS (USA)
The Ferrolux location system is the solution for your day-to-day tasks. You can use the system to quickly and easily find cable faults. You can locate lines just as quickly, measure how deep they are and save data in the memory. The route sensor for location tasks weighs less than 1 kg, which means you can use it for lengthy periods without getting tired. Special ...
Manufactured by:BAUR GmbH based inSulz, AUSTRIA
The Syscompact 400 is an efficient and safe cable fault location system for high-resistive and intermittent faults on all types of cable. The biggest innovation is the high-performance IRG 400, which replaces its predecessor and is the perfect complement to the tried-and-tested system. ...
Manufactured by:BAUR GmbH based inSulz, AUSTRIA
The Syscompact 400 portable is an efficient and safe cable fault location system for high-resistive and intermittent faults on all types of cable. The biggest innovation is the high-performance IRG 400, which replaces its predecessor and is the perfect complement to the tried-and-tested system. ...
Manufactured by:Armada Technologies, LLC based inCaledonia, MICHIGAN (USA)
The Pro400 Graphical TDR is a great tool for locating faults in metallic cables with 2 conductors. Twisted pair, coax, LAN cabling, etc. are simple to test for distances to shorts, opens, etc. By connecting the leads to the cable to test, a graphical display quickly and easily shows faults and events on that ...
Manufactured by:Asian Contec Ltd. based inNew Delhi, INDIA
ETL40 Van Mounted Cable Fault Locating System is the most advanced system in power cable fault detection combining the best-in-market technologies into a single fully automatic centralized setup with high reliability and multi-level safety standards. The system is capable of locating faults on low & high ...
Manufactured by:Applied Techno Products Pvt. Ltd. based inGurugram, INDIA
According to statistics, the most common faults in the three-phase underground power cable occur such as "single-phase breakdown" (breakdown of one of the cores to the cable sheath). Breakdown of this type can be "creeping"(intermittent) (ie recovering insulation up to a certain voltage, which is lower than the operating voltage of the ...
Manufactured by:Applied Techno Products Pvt. Ltd. based inGurugram, INDIA
High-voltage oscillographic reflectometer "ISKRA-4" is designed for distance fault locations of communication and power supply ...
Manufactured by:BAUR GmbH based inSulz, AUSTRIA
The ATG 2 burn down transformer is used for impedance reduction of cable faults in low- and medium-voltage networks. The short-circuit proof 2300 VA stray field transformer delivers a maximum voltage of 10 kV and is housed in a fully enclosed 19” housing. Portable device for changing the fault resistance, Useful for ...
Manufactured by:BAUR GmbH based inSulz, AUSTRIA
The high performance ATG 6000 burn down transformer is used for impedance reduction of cable faults in low- and medium-voltage networks. The short-circuit proof 5.75 kVA stray field transformer delivers a maximum voltage of 15 kV and is housed in a fully enclosed 19” housing. Proven methodes for cable faults that are ...
Manufactured by:Sonel S.A. based inSwidnica, POLAND
Location damaged power cables. Fault location copper telecom cables. Coaxial cable fault location. Fault location wiring infrastructure. Detection of breaks, short circuits, damage caused by dampness and other changes in impedance of the cable. Graphic depiction of damage the ...
Manufactured by:Megger based inDallas, TEXAS (USA)
Utility location system to detect and trace cable runs and pipe networks. The Easyloc is fast and simple to operate, with features designed to avoid potentially dangerous power cables and other services as efficiently as possible. Easyloc is suitable for water, rail, gas, power, highways and telecommunication utilities and contractors and anyone who is proposing to engage in ...
Manufactured by:Atriy Electronic Appliances Trading LLC based inDubai, UNITED ARAB EMIRATES
Cable fault indicator Lodestar PT2 is intended for detection of fault localization in overhead and cable power distribution lines of 6-35 kV.The cable fault locator can operate in networks with insulated, grounded and resistance-grounded neutral types.The fault detector is ...
Manufactured by:Radiodetection Ltd - an SPX Corporation brand based inRaymond, MICHIGAN (USA)
TDR Time Domain Reflectometer / Network Analysis / Cable Test. Ensuring your customers stay connected to your network is your number one priority. The 1205CXB TDR is the perfect tool to pinpoint copper cable faults - quickly, easily and accurately. Radiodetection has created the 1205CXB Metallic Cable Analyzer TDR to make finding ...
Distributed by:InterEng Messtechnik GmbH based inZschorna, GERMANY
The InterFlex 130 can be used by all utility companies to determine the location of cable faults in energy and control cables (underground cables and overhead ...
Manufactured by:Netcontrol Oy based inHelsinki, FINLAND
Improve network availability; Remote and local control of feeder switching devices. Bidirectional fault detection. Detection of transient cable faults. Automatic fault-triggered tripping for feeder protection. Alternatively, automatic network reconfiguration in response to MV ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
Mobile systems SWG-12 and SWG-32 are designed for the following applications: testing insulation of power cables with DC voltage up to 32 kV; conditioning faults by burning faulty cable insulation with DC current up to 100 mA at up to 32 kV voltage; pre-locating cable faults with an aid of the reflectometer RIF-9 ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
Reflectometer RIF-9 can be used to detect, determine the type of and distance to various inhomogeneities (couplings, branching, etc.), determine the total length (including on drums and in bundles) as well as the velocity factor of balanced and unbalanced power cables and communication lines up to 120 km long. When locating cable faults, the ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
Van-based cable test and fault location system ETL-8 is used for testing cable insulation and locating cable faults using a variety of methods. Due to its compact size, ETL-8 may be installed in a minivan, yet it is a fully-featured cable test and fault location system which ...
Manufactured by:HI-TECH ELECTRIC, UAB based inVilnius, LITHUANIA
AQ F210 offers a modular feeder protection and control solution for non-directional overcurrent and earth-fault protection with automatic reclosing. Up to four optional I/O or communication cards are available for more comphrehensive monitoring and control applications. The AQ F210 communicates using various protocols including IEC 61850 substation communication ...