Carbon Testing Equipment
-
based in NORWAY
Aker Clean Carbon‘s custom-built mobile test capture facility has been in operation since the autumn of 2008. The prime objective for the Mobile Test Unit is to provide operational data from reliable field tests. The plant will capture CO2 from different industrial flue gases and is equipped with advanced monitoring ...
-
Manufactured by Hoskin Scientific Limitedbased in CANADA
An automatic airtight furnace that is pre-programmed to run tests to determine Micro (Conradson) Carbon residue of petroleum products. The digitally controlled furnace has a temperature range of ambient to 500°C. Temperature, flow and pressure values are automatically controlled and values are displayed on the control panel. The test ...
-
Manufactured by Beijing Naijiu Weiye Technology Co., Ltdbased in CHINA
Concrete carbonation test chamber is a special equipment in the carbonation test. This machine uses imported carbon dioxide sensor.The sensor adopts infrared detection principle and combined with the national advanced digital instrument, which has the high precision and long life characters; temperature and ...
-
Manufactured by Critica Infrastructurebased in USA
Atlas™ is the most tested carbon fiber composite solution for the permanent repair and rehabilitation of pipelines and piping structures. Atlas™ is highly engineered to permanently restore the original strength of pipelines suffering from both common and complex pipeline anomalies while maintaining strict compliance with ...
-
Manufactured by August Brötje GmbHbased in GERMANY
Heat has been newly revised- extremely progressive and absolutely economic. The new NovoCondens BOB is a real pioneer in terms of heating. Thanks to carbon, well tested in Formula One racing, efficiency is being re-assessed. Its superb thermal conductivity and the Lotus effect elevate the condensing heat exchanger to the core ...
-
Manufactured by Sunshine Scientific Equipmentsbased in INDIA
Carbon Residue Apparatus (Conradson) (IP-13, ASTM-D189 & 2416) Conradson Carbon Residue Apparatus with Gas Burner (Single Test Apparatus). Conradson Carbon Residue App. Electric heating with energy regulator. Conradson Carbon Residue Apparatus (Four Test Apparatus) With Gas Burner. Conradson ...
-
Manufactured by VINATechbased in SOUTH KOREA
to corrosion in a holding test satisfying carbon corrosion conditions. VINATech’s fuel cell catalyst also demonstrated a low decrement of reaction ...
-
Manufactured by Tanaka Scientific Ltd.based in JAPAN
ACR-M3 is a tester to be used for the determination of the amount of carbon residue formed after evaporation and pyrolysis of petroleum material under certain conditions and is intended to provide some indication of the relative coke forming tendency of such ...
-
Manufactured by Alloy Steel Technologybased in INDIA
IS2062 Carbon Steel Plate Flanges, IS2062 Flange, IS2062 Flanges,ANSI B16.5 Carbon Steel IS2062 Flanges, Carbon Steel IS2062 Flange, CS IS2062 Pipe Flanges, IS2062 Carbon Flanges, Carbon Steel IS2062 Flanges, CS IS2062 Forged Flanges, ASTM A105 Flange, Carbon Steel IS2062 Flanges Manufacturer in ...
-
Manufactured by Alloy Steel Technologybased in INDIA
Carbon Steel A36 Flanges Exporter, CS A36 Flanges, A36 CS Raised Face Flanges,Carbon Steel A36 Flat Face Flanges, Carbon Steel A36 Forged Flanges Supplier in India, ASTM A36 Carbon Steel Flanges, Carbon Steel A36 Flanges Manufacturers in Mumbai. Largest Stockholder of CS A36 Flanges in ...
-
Manufactured by Alloy Steel Technologybased in INDIA
Carbon Steel A105 Spacer,Carbon Steel A105 Pipe Flanges, ANSI B16.5 Carbon Steel A105 Orifice Flange, 150# ANSI Carbon Steel A105 Flanges, Carbon Steel Flanges, Carbon Steel A105 Slip On Flanges Supplier in Mumbai, India. Carbon Steel A105 Blind Flanges,ASTM A105 ...
-
Manufactured by PAC L.P. A Roper Companybased in USA
Alcors MCRT-160 provides safe, simple measurement of a petroleum products tendency to thermally degrade and form coke under high temperature pyrolyzing conditions.Its powerful digital control over all ASTM D4530 test steps delivers results equivalent to Conradson Carbon (ASTM D189) with significantly less inconvenience or fuss. A typical ...
-
based in USA
advanced materials like carbon ...
-
Manufactured by Stanhope - Setabased in UNITED KINGDOM
The Micro Carbon Residue Tester is an automatic airtight furnace that is pre-programmed to run tests to determine Micro (Conradson) Carbon residue of petroleum ...
-
Manufactured by Piyush Steelbased in INDIA
Carbon Steel API 5L Gr B Seamless Line Tube, API 5L Gr B Seamless Tube, API 5L Grade B Seamless Tubes, Seamless Line Pipes API 5L Grade B, API 5L Gr.B Carbon Steel Seamless Line Tube, API 5L Gr.B Carbon Steel Seamless Line Tubes Supplier in Mumbai, ...
-
Manufactured by Piyush Steelbased in INDIA
A106 Carbon Steel Gr B Seamless Pipe, A106 Carbon Steel Grade B Pipes, ASTM A106 Grade B Pipe, ASTM A106 Seamless Pressure Pipe, ASTM A106 Grade B Seamless Pipes, SA106 Carbon Steel Gr.B Seamless Pipe, A106 Carbon Steel Gr.B Pipes Supplier in Mumbai, ...
-
Manufactured by Yatherm Scientificbased in INDIA
Carbonation Chambers Are Ideal for Testing the Durability of Various Building Materials. The carbonation Chamber is primarily designed to determine the temperature and humidity conditions required to protect the precious samples. This activity is done under a certain concentration (that may vary from 20% to less) of carbon ...
-
Manufactured by Manifold Pipe Solution Inc.based in INDIA
A105 Carbon Steel Flanges Manufacturers, Ready Stock Of A105 Carbon Steel Threaded Flanges In India, Buy Directly From Carbon Steel A105 Plate Flanges Manufacturers In MumbaiCheck Carbon Steel Weld Neck Reducing Flange A105, Carbon Steel A105 Blind Flange Price List 2019, Buy From Carbon Steel ...
-
based in USA
The TPR4000™ is a low-power, plasma-based advanced oxidation technology. The unique design of the TPR combines a continuous-mixing mechanism with an air-enhanced plasma discharge system. Liquid enters from the top into the treatment chamber and is turbulently mixed and constantly exposed to the plasma nozzles. A low voltage is applied across the plasma nozzle and the discharge area while ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you