Only show results available in Virginia? Ok

Cigs-Based Photovoltaic equipment

  • Protekt - Model HD - Classic Fluoropolymer Coating Backsheet

    Protekt is the product line that changed the backsheet market. Our award winning design combines a highly durable outer fuoro-coating layer onto base dielectric bonding layers. The resulting bachsheet is highly weatherable, electrically and chemically insulating, and performs above industry standards.Protekt with an “HD” designation ...

    By Madico, Inc. based in Woburn, MASSACHUSETTS (USA). from Photovoltaics Product line

  • Model TPE HD - Expertly Constructed Tedlar Based Backsheets

    Using the TPE construction, the HD designation represents high dielectric performance that exhibits superior partial discharge and electrical insulation properties.

    By Madico, Inc. based in Woburn, MASSACHUSETTS (USA). from Photovoltaics Product line

  • GPP - Solar Glass Inspection

    SurfaceInspect.Glass is the GPP test system for the inspection of glass panels. The main purpose of this system is the quality inspection of glass panels for thin film solar modules or protective glasses for silicon based thick solar modules. The inspection proceeds on-the-fly. Thus, the test system integrates seamlessly into automated large-scale ...

    By GPP Chemnitz mbH based in Chemnitz, GERMANY. from Photovoltaics Product line

  • Model CIGS - BIPV Thin-Film Solar Modules

    Manz has decades of experience in the manufacture and installation of CIGS thin-film solar modules (CIGS = Copper Indium Gallium Diselenide). With this knowledge, we support you in your BIPV projects and together with our partners offer not only the right thin-film solar modules, but also complete, individually tailored system solutions.

    By Manz AG based in Reutlingen, GERMANY. from Solar Product line

  • Model TS-140C1 TS-145C1 TS-150C1 TS-155C1 CIGS - Photovoltaic Modules

    Istar Solar is an authorized dealer TSMC-SOLAR for the high-performance CIGS technology. CIGS cells have a 99% absorption of light in just a few microns thick, with a higher sensitivity to the entire solar spectrum, thus increasing the voltage and the efficiency of the cells and consequently an higher yield in low insulation.CIGS modules, not to ...

    By Istar Solar based in Tito, ITALY. from Modules Product line

  • GNG - Model Poly 245-295W - Crystalline Solar Panel

    In-house-made poly crystalline cells with high efficiency by 100% automatic production lines from Germany, England and Japan High conversion efficiency based on innovative technologies Selected EVA, TPT, and other raw materials to ensure long durability 3.2 mm glass with high transmission, and strong withstanding against wind-pressure & snow ...

    By GNG New Tech, LLC based in Miami, FLORIDA (USA). from Photovoltaic Modules Product line

  • GNG - Model Poly 220-250 W - Crystalline Solar Panel

    In-house-made poly crystalline cells with high efficiency by 100% automatic production lines from Germany, England and Japan High conversion efficiency based on innovative technologies Selected EVA, TPT, and other raw materials to ensure long durability 3.2 mm glass with high transmission, and strong withstanding against wind-pressure & snow ...

    By GNG New Tech, LLC based in Miami, FLORIDA (USA). from Photovoltaic Modules Product line

  • GNG - Model Mono 245-295 W - Crystalline Solar Panel

    In-house-made mono crystalline cells with high efficiency by 100% automatic production lines from Germany, England and Japan High conversion efficiency based on innovative technologies Selected EVA, TPT, and other raw materials to ensure long durability 3.2 mm glass with high transmission, and strong withstanding against wind-pressure & snow ...

    By GNG New Tech, LLC based in Miami, FLORIDA (USA). from Photovoltaic Modules Product line

  • EMMVEE - Off-Grid Modules & Systems

    EMMVEE has developed a range of standard Off-Grid Modules & Systems for stand-alone and Off-Grid applications. The components are best chosen to ensure highest qualitative performance of the system. All products are subject to a continuous optimization process and very stringent quality checks. Additionally to our standard portfolio, our team ...

    By EMMVEE Photovoltaic Power Private Limited based in Bengaluru, INDIA. from Photovoltaic Modules Product line

  • GNG - Model Mono 215-240W - Crystalline Solar Panel

    In-house-made mono crystalline cells with high efficiency by 100% automatic production lines from Germany, England and Japan High conversion efficiency based on innovative technologies Selected EVA, TPT, and other raw materials to ensure long durability 3.2 mm glass with high transmission, and strong withstanding against wind-pressure & snow ...

    By GNG New Tech, LLC based in Miami, FLORIDA (USA). from Photovoltaic Modules Product line

  • Ioannou - Net-Metering Systems

    The purpose of Net Metering is the consumer to pay as little as possible for electricity due to producing energy through photovoltaic systems. The meter of EAC which is placed in homes showing the kilowatt hours (kWh) consumed in every two months and based on this indicator calculates the amount to be paid after adding some fees, surcharges, ...

    By Ioannou Alternative Energy Ltd based in Limassol, CYPRUS. from Photovoltaics Intropage Product line

  • SmartExergy - Monitoring Portal

    The Monitoring Portal is a web-based monitoring application that provides an unprecedented monitoring capability for total system transparency. The condition of each and every module can be queried. Any fault is remotely detected straight away and can quickly be localised and fixed.

  • CdTe Thin-Film Solar Cells

    CdTe thin-film solar cells are composed of a transparent conductive front contact layer,a thin n-conducting CdS-layer, a p-conducting CdTe absorber layer and a metallic back contact. The preferred substrate material is glass, just like with a-Si/µc-Si and CIGS thin-film cells. However, the use of metal strip and polymer films (PI) is also ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • CIS Thin-Film Solar Cells

    The basis of a CIS thin-film solar cell is a compound semiconductor based on copper, indium, selenium and/or sulfur – CuIn(Ga)(Se, S)2. The p‑conducting CIS layer of up to 3 μm thickness is combined with an n‑conducting CdS‑buffer layer (up to 50 nm). Adding gallium to the semiconductor increases the energetic efficiency ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • Twin-Base - Substructure for Ground Based Power Plants

    Jurchen Technology will provide you with a suitable frame system for your solar power plant, appropriate for the type of terrain. Regardless of whether it be the single-support Uni-Base, the double-support Twin-Base, the height adjustable substructure for waste disposal sites or a completely adapted system – Jurchen Technology has a product ...

    By Jurchen Technology GmbH based in Helmstadt, GERMANY. from Ground Based Power Plants Product line

  • Silicon Thin-Film Cells

    Silicon thin-film solar cells are based on amorphous (a-Si) or microcrystalline silicon (μc-Si). These solar cells require semiconductor layers (absorbers) of a thickness up to 2 μm. The semiconductor layers are deposited at low process temperatures on large-area, low-cost materials, primarily glass, but also on metal strip or polymer films. ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • Building Integrated Photovoltaics (BIPV)

    Incorporating building integrated photovoltaics (BIPV) into commercial, industrial and institutional facilities can significantly improve energy efficiency and reduce a building’s impact on the environment. Today, numerous “green” solutions are available for achieving on-site distributed power generation based on the unique ...

    By Pfister Energy based in Hawthorne, NEW JERSEY (USA). from Solar Electric (Photovoltaics) Product line

  • Seraphim - Photovoltaic Modules

    Seraphim Solar systems based in China produce some of the best performing and highest quality panels available on the market today. Photon Tested August 2012, Seraphim came 1st for performance ratio between January -June with 95.1% against some 93 tested market leading brands. Each panel is built to the highest standard using only the best quality ...

    By NuVision Energy based in Devon, UNITED KINGDOM.

  • Model 1 - Photovoltaic Panels

    Solar 1 is a support for a photovoltaic panels made of thermoplastic polymer injection, fully recyclable. Consists of two elements side by side in order to fix a panel, stability is granted by appropriate ballast.This product have been designed: to be used on flat surfaces , roofs or ground, to simplify and speed up the installation, fixing to the ...

    By Gianazza Angelo S.p.a based in Legnano, ITALY. from Energy Product line

  • UniBase - Model Uni-Base VAL R - Substructure for Ground Based Power Plants

    Jurchen Technology will provide you with a suitable frame system for your solar power plant, appropriate for the type of terrain. Regardless of whether it be the single-support Uni-Base, the double-support Twin-Base, the height adjustable substructure for waste disposal sites or a completely adapted system – Jurchen Technology has a product ...

    By Jurchen Technology GmbH based in Helmstadt, GERMANY. from Ground Based Power Plants Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you