Show results for
Refine by
Cogeneration Engine Equipment & Supplies
22 equipment items found
by:Ecochimica System s.r.l. based inCreazzo (Vicenza), ITALY
Biogas, if not dehumidified cannot be sent directly through the cogeneration ...
Manufactured by:IMFsoft, s.r.o. based inOstrava–Mariánské Hory, CZECH REPUBLIC
Independed ignition up to 12 valves for cogeneration units engines. Fuel mixture management based on data from Lambda controller. Flap controll by actuator or stepper motor. Lambda probe Bosch LSU 4.9 for unbeatable prices. ...
by:Sol Power Plus S.L based inSalamanca, SPAIN
SOL POWER Plus Fuel, is an Enhancement Reagent that hydro-oxygenates fuels when added in a proportion of 0.25%, reducing the emission levels of pollutants, and likewise reducing the rates of emission opacities through improved combustion, which therefore means a saving on fuel. Its use improves the properties of fuels, achieving more efficient engines or installations, without the need to make ...
Manufactured by:B:POWER, a. s based inHavlíckuv Brod, CZECH REPUBLIC
The German technology from the company DURR has the biggest offer of products at all. It is possible to use small ORC units DURR CYPLAN from 40kW of electric output up to large 500kW generators. They are divided into two types – direct connection of flue gases (up to 250kWel) and with the oil management (350kWel and ...
Manufactured by:Venair based inTerrassa, SPAIN
Air or water conduction at high temperatures, it can be used in vehicles and in the industrial ...
Manufactured by:R Schmitt Enertec GmbH based inMendig, GERMANY
The ENERGIN M series Gas engines form the base for a range of efficient power generation products. Depending on your projects requirement you can choose the best fit from our wide range of generator sets with and without heat recovery and cogenerators. The engines are designed and manufactured by R Schmitt Enertec in Mendig, ...
Manufactured by:TEMPCO S.r.l. based inDesio (MB), ITALY
Skid package units for fuel preheating in engines and cogenerating plants. Possible execution with electric heaters Working temperature ...
Manufactured by:PSW-Energiesysteme GmbH based inCelle, GERMANY
Gas or diesel engine-driven cogeneration system with a built-in hot water tank, for heating & decentral power generation at your home or small ...
Manufactured by:Aningas-Ergos S.A. based inBarcelona, SPAIN
ANINGAS Thermal fluid heaters from 10.000 kcal/h to 10.000.000 kcal/h. Maximum service temperature up to 410ºC ...
Manufactured by:Martin Energy Group, LLC based inTipton, MISSOURI (USA)
In a conventional system, approximately two thirds of the fuel burned to generate power is lost as heat. Our engineered Exhaust heat recovery systems allow you to capture thermal energy from your exhaust gases, engine jacket water, and oil cooling systems. This recovered heat can be utilized to produce hot process water or steam for a wide variety of useful applications such as heating and ...
Manufactured by:Burkhardt GmbH based inMühlhausen, GERMANY
The V 3.90 Burkhardt wood gasifier, together with the ECO 180 HG (with pilot injection gas motor) combined heat and power plant or the ECO 165 HG (petrol engine), delivers electrical and thermal energy from wood pellets. Depending on which CHP we use, we are able to generate 260 - 270 kW heat and 165 - 180 kW of ...
Manufactured by:Burkhardt GmbH based inMühlhausen, GERMANY
Working on the principle of combined heat and power, cogeneration units produce both electrical power and usable heat. This uses some 90 % of the heat available from the fuel consumed, saving significant amounts of primary energy and CO2 emissions. The energy is produced exactly where it is required, thus avoiding transport losses. That makes cogeneration units highly efficient and ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
A GE Jenbacher gas engine module is configured for the recovery of both electricity and heat via a cogeneration / CHP configuration. As with the genset, the gas engine is linked to the alternator which produces electrical power for export. The cooling water circuits of the engine are first linked to a plate heat exchanger which ...
Manufactured by:Urbar Ingenieros, S.A. based inAsteasu, SPAIN
Waste/feed: Animal manure, used oils, agricultural waste, biomass, food waste, energy crops. Products: Biogas converted to CHP in internal combustion engines ...
by:SMEA Engineering srl based inRepubblica di San Marino, ITALY
Our systems can turn energy crops, food and agriculture by products, animal manure and slaughter waste into something more profitable. Feedstock is homogenized in the mixing unit and automatically pumped into our highly optimized medium-loading rate, continuous flow anaerobic biodigestors. The entire biodigestion process is software controlled, and specially designed to maintain the quality of ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised combined heat and power unit. They are present in a wide range of different applications and along with the other systems can be ...
Manufactured by:Tecogen, Inc. based inWaltham, MASSACHUSETTS (USA)
The InVerde e+ module is the first and only clean natural gas engine-driven cogeneration system able to operate within the extremely low levels of regulated pollutants allowed by the distributed generation regulations for 2007 set by the California Air Resources Board (CARB). The InVerde e+ emissions not only meet but exceed the stringent CARB 2007 ...
Manufactured by:ICI Caldaie S.p.A based inFrazione Campagnola di Zevio, ITALY
The waste-heat boilers of the WH range recover energy from hot flue gases as heat source without any supplementary combustion. These boilers are of the monobloc type, with fully automatic operation and are provided with all accessories required for quick commissioning.The WH range is characterized by a great flexibility of design and use; the boilers are designed specifically to meet any ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for commercial applications. Cogeneration systems are successfully applied in a range of different applications including office buildings, airports and retail ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Gas engines based cogeneration, or combined heat and power (CHP), offers a range of potential benefits to industrial applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. ...