Combined Heat And Power Equipment
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
, reliable electricity, use steam for production processes, and implement heat for water and building space, or seasonal/process ...
-
Distributed by NewEnCobased in UNITED KINGDOM
Combined heat and power (CHP) is the generation of electricity and useful heat from the same item of plant. In most CHP installations, the electricity displaces some of the power which would be bought from the local supply network and the heat recovered from the engine supplements or in ...
-
Manufactured by Remeha B.V.based in NETHERLANDS
Combined heat and power (CHP), or cogeneration, is the simultaneous production of useful heat and electricity from a single source. It is a true low (or zero) carbon dioxide alternative to a gas boiler. Micro-CHP (µCHP) refers to the small-scale production of heat and power for ...
-
Manufactured by Climate Technologies Corp.based in USA
A small industrial gas turbine combined with an innovative combustion chamber designed to burn regulated volatile organic air emissions as a secondary fuel, is a surprising economic game changer for manufacturing companies seeking energy efficiency, reduced carbon emissions, competitiveness and profitability. Feasibility assessments ...
-
based in AUSTRALIA
For the large commercial and industrial applications, there is no equal to the Avus series. Avus ranges in size from 527kW to 4,000kW, and larger sizes are available on request. Avus outperforms all other CHP systems and is the ultimate choice for dependable onsite power and thermal generation. ...
-
Manufactured by EC Power A/Sbased in DENMARK
The XRGI® is a combined heat and power plant (CHP) that works on the principle of cogeneration. An XRGI® system consists of three main components: the Power Unit, Q-Heat Distributor and the iQ-Control Panel. In addition, you can also extend your XRGI® system with a storage tank with a capacity of 500, ...
-
based in GERMANY
A CHP (Combined Heat and Power) station is a combination of a combustion engine, a generator and a cooling and control system. It may use an engine with spark ignition for the combustion of gases (natural gas, liquid petroleum gas, biogas etc.) or a diesel engine for the combustion of liquid fuels (diesel oil, ...
-
based in GERMANY
Combined heat and power plants (CHPs) simultaneously generate electricity and heat on the basis of cogeneration. Due to a higher efficiency compared to the separate generation of electricity (e.g. coal-fired power plants) and heat (e.g., boiler with fuel oil or natural gas), this type of plant ...
-
Manufactured by Tide Power Technology Co., Ltd.based in CHINA
Cogeneration, also known as Combined heat and power (CHP), is a highly efficient process that generates electrical energy and useful heat simultaneously. By using waste heat, which is recovered from the engine jacket water and exhaust gas, the overall efficiency of CHP systems can exceed 80%. The ...
-
Manufactured by Minergy Corporation Limitedbased in UNITED KINGDOM
Combined Heat and Power (CHP) systems (also known as cogeneration) generate electricity (and/or mechanical energy) and thermal energy in a single, integrated system. This contrasts with the more typical practice where electricity is generated at a central power plant and on-site equipment is used to meet nonelectric energy ...
-
based in UNITED KINGDOM
Combined heat and power (CHP) is a way of using the heat from power production for increased efficiency. Conventional energy generation can be very wasteful of heat, even in modern coal and gas fired power stations, where possibly only a third of the energy used to ...
-
Manufactured by USA Sludgebased in USA
Waste heat is created by the use of combined heat power systems or waste heat generated by existing boiler use. This is an innovative way to increase drying efficiency. Waste heat lowers greenhouse gas emissions (GHG) and utility costs. We use state of the art systems that are environmentally ...
-
Manufactured by Nehlsen AGbased in GERMANY
The decision to construct this power plant was made in May 2005; and since summer 2007, the Combined Heat and Power Plant has been supplying the company Pfanni, manufacturer of potato-based instant products, with process steam and electrical power by means of a co-generation system.By utilising around 95 000 ...
-
Manufactured by YANMAR Energy Systems, A part of YANMARbased in USA
YANMAR’s Combined Heat and Power (CHP) system uses an internal combustion engine, powered by clean natural gas, to produce both heat and electric ...
-
Manufactured by CHEEMA BOILERS LIMITEDbased in INDIA
Combined heat and power (CHP) is the simultaneous cogeneration of electricity and heat. Cogeneration is a highly efficient form of energy conversion. It can achieve primary energy savings of approximately 40% compared to the separate purchase of electricity ...
-
Manufactured by Royal Dahlman BVbased in NETHERLANDS
Royal Dahlman has participated in the design of several combined heat and power plants with our OGLA tar removal system and our knowledge on the overall plant integration. Most work has been done on GE-Jenbacher type 6 gas engines and Caterpillar 3516A+ gas engine, nowadays replaced by the 3516C gas engine. Royal Dahlman realised two OLGA ...
-
Manufactured by Anesco Ltdbased in UNITED KINGDOM
Using electricity available through the National Grid is high in carbon and expensive to use. Creating electricity is also an inefficient process. One alternative is to use combined heat and power (CHP) units, which simultaneously generate electricity and ...
-
Manufactured by Dalkia Aegis, EDF Groupbased in USA
A powerful enhancement of the PowerSync line, both the PowerVerter PV-75 and PV-100 reflect continual innovation to meet consumer needs. These unique, standalone products represent a redefinition of the CHP experience, marrying the trademark savings and emissions reductions with black start capability. The PowerVerter systems offer the ...
-
based in USA
The first true off-grid electrical system of its kind, our biomass fueled, BioGen combined heat and power system creates up to 1 kW of electricity by harnessing the power of gasified biomass. The robust design our biomass system utilizes the full potential of biomass by creating 8.5 kW (29,000 BTU’s) of thermal energy for ...
-
Manufactured by EC Power A/Sbased in DENMARK
The XRGI is a combined heat and power plant (CHP) that works on the principle of cogeneration. An XRGI system consists of three main components - the Power Unit, Q-Heat Distributor and the iQ-Control Panel. In a package with a Flow Master [temperature contrail, class II = 2 %) the XRGI is rated as seasonal space ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you