Combustion Control Equipment In Asia & Middle East
-
Manufactured by ClearSign Combustion Corporationbased in USA
Electrically charged molecules, or ions, are a natural product of the combustion process. ClearSign’s Electrodynamic Combustion Control technology introduces computer-controlled electric fields to manipulate the movement of these ions and precisely control flame shape and the transfer of heat to, through, ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
LEANOX is a lean-mixture combustion control. It was developed by GE's Jenbacher and has been patented worldwide. The system ensures the correct air to gas ratio under all operating conditions. This has the benefit of minimising exhaust gas emissions whilst maintaining stable engine ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Proportional Adjustable Ration Control, Pressure, DP, or Electronic Input, Uses Common Power Supply, Spindle, Slide, Bell Crank, or Geared Wheel Ration Adjusters, 235 to 45,000 lbs. of ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Integral Motor / Pump, Low Inertia / Torque Ratio, Same options as 13x10 Models, Simplicity of Design, High Speed ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Model 13210 Proportlonal-Plus-Reset Hydraulic Controller Is designed for slow-reacting control applications that require stability. A group of controllers are supplied from a separate, but common power supply. The controller has a practical output range of approximately 235 to 45,000 pounds of force at the actuator. Model ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Double end, low by-pass leakage, 1 1/2" - 8" bore, bronze bearings, up to 1500 lbs, chrome plated cylinder rod, foot, flange, or pivot ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Five Gallon Reservoir, 125 to 230 PSI, Mounting for Two Controllers, External Pump for Easy Maintenance, 1/2 Horsepower Pump, Meets JIC Standards, 0.8 to 4.0 ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Meets JIC Standards, 5 to 15 Horsepower, 500 to 900 PSI, 60 Gallon Reservoir, 10 to 20 ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Integral Power Supply, Pressures up to 1000 psi, 10 to 40 GPM, 10 to 25 Horsepower, 100 Gallon Reservoir, Proportional Control, Pneumatic or Electronic Inputs, Manual or Automatic ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Integral Power Supply, Pressures up to 930 psi, 5.8 to 14.1 GPM, 3 to 7.5 Horsepower, 35 Gallon Reservoir, Proportional Control, Pneumatic or Electronic Inputs, Manual or Automatic ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Single End, Low By-Pass Leakage, 1 1/2' - 8' Bore, Bronze Bearings, Up to 1500 lbs, Chrome Plated Cylinder Rod, Foot, Flange, or Pivot ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Proportional Control, Pressure, DP, or Electronic Input, Uses Common Power Supply, Spindle Set Point Adjusters, 235 to 45,000 lbs. ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Ten Gallon Reservoir Eliminates the Need for Heat Exchanger, Pressure, Filter, and Level / Temperature Switches, Meets JIC Standards, 3.7 GPM, 100 to 300 ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
-
Manufactured by CNPC Jichai Power Company Limitedbased in CHINA
In cooperation with the WOODWARD Company of the United States, A kind of pre-mixed gas engine with a supercharger is developed by utilizing the internationally advanced external gas mixing method, advanced electronic control technology, and rarefied combustion control strategy. This series of products has been put on the market nearly a ...
-
Manufactured by Organics Group plcbased in UNITED KINGDOM
The MC range of flare stacks provides a combustion strategy which holds the gases at 1200oC for the specified retention time. This takes to its realistic limit this form of combustion control. The key to this form of technological solution is to raise the temperature of the combustion process to 1200oC and retain the ...
-
Manufactured by Organics Group plcbased in UNITED KINGDOM
The LHC (Low Heat Content) Range flare is designed specifically to address the problem of combusting gases with low calorific values, or heat contents. The optimisation of combustion control techniques ensures that heat loss is minimised, whilst air and gas mixing is maintained at a very high level. In normal landfill gas flares, for ...
-
Manufactured by Viessmann Werke GmbH & Co. KGbased in GERMANY
A state of the art heating system and our most efficient boiler, lower emissions, simple operation. Future-proof, durable and digital. Vitodens 200-W hydrogen ready boiler (H2 20% blend) sets the standard for the future. Easy to install, operate and maintain. Rated heating output: 2.5 to 32 kW. Lambda Pro Plus combustion controller. ...
-
Manufactured by Hubei Teweite Power Technology Co., Ltd.based in CHINA
Volvo engine provides bigger power margin, stable performance, lower fuel consumption, and environmental. Because of their stable performance, strong power, environmental and hommization design, Volvo engine has been widely loved by global users. Through careful management of the combustion process, involving precise control of air ...
-
Manufactured by Shenzhen Jensonn Power Equipment Co., Lt.based in CHINA
Adopting a combustion strategy supporting electronic controlled multi-point injection and theoretical air-fuel ratio. Jensonn genset engine delivers better power performance and higher emission standard. 3, 4 and 6 cylinder diesel engines for generator sets. High Reliability — Stable governing performance, 3% -5% governing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you