Combustion Industry Equipment
-
Manufactured by Duiker Combustion Engineersbased in NETHERLANDS
Duiker has an extensive portfolio of industrial forced draft burners for process heaters, furnaces and industrial boilers. These burners have been fine-tuned through proven technology to minimize emissions as well as economize design. They apply a high intensity swirl to generate an extremely stable turbulent flame, which in turn ...
-
Manufactured by Körting Hannover AGbased in GERMANY
Climate protection and plant efficiency; Lack of resources and progressively increasing fuel prices – Climate protection and stricter environmental specifications. These are just a few of the challenges for which future economical solutions in the area of firing technology are required. The efficiency of technical firing plants gives operators competitive advantages and a winning ...
-
Manufactured by Yongxing Boiler Group Co.,Ltdbased in CHINA
Industrial natural gas boilers are mainly composed of the boiler body, burners, instruments, economizers, condensers, etc. It has the characteristics of low pollution, convenient operation, ...
-
Manufactured by Cain Industries, Inc.based in USA
The ESG (Exhaust Steam Generator) is an unfired fully automatic, skid mounted packaged steam generator combining a finned tubing heat transfer section, steam flash circulating drum assembly, and full exhaust bypass. Where low or high pressure steam output demand is a necessity, the ESG in terms of recovered BTU/hr and its use, is a more valuable alternate selection to liquid or air preheat ...
-
Manufactured by CARBOTECHNIK Energiesysteme GmbHbased in GERMANY
Our hot gas generators can be used for drying a broad range of products such as cement, limestone, animal feed, grass, etc. The burner is primarily designed for the combustion of pulverised materials, such as lignite, biomass, sludge, etc. But gaseous and liquid fuels can be used as well. Depending on the design, automatic switching between ...
-
Manufactured by Windsor Engineeringbased in NEW ZEALAND
Utilising waste gas in process heating or power generation (gas engine) is a preferred method of disposal, but sometimes it is impractical due to distance from a suitable site. Flaring gas is the best alternative in this situation. A temporary flare may also be required for co-generation standby systems and during landfill ...
-
Manufactured by SAACKE GmbHbased in GERMANY
With the CCS-HT combustion chamber series, SAACKE offers standardized hot gas generators in a wide load range. Proven thousands of times in real applications, they are suitable for all standard fuels as well as numerous special fuels and can be used to operate any SAACKE burner in almost any installation ...
-
Manufactured by SAACKE GmbHbased in GERMANY
If space is limited, the hot gas generators of the CCS-HTcompact series are often the first choice. The CCS-HTcompact consists of a double steel shell, lined with refractory bricks inside. Optimised for natural gas combustion systems, a SAACKE SSB-G is used as the burner, which generates a moderate combustion chamber temperature thanks to a ...
-
based in USA
Natural gas releases carbon dioxide when it is combusted. Using traditional methods to capture and manage this CO2 is energy intensive and expensive. What if you could pull concentrated carbon out of natural gas before it was burned and before the CO2 was even generated? Modern Hydrogen technologies do exactly this. Our Pre-Combustion ...
-
Manufactured by Hofstetter BVbased in NETHERLANDS
Customised industrial gas flare with high-temperature combustion, conceived specifically for the disposal of industrial and contaminated gases. Ideal for combustible industrial gases, such as VOC gas, pyrolysis gas, wood gas, flue gas, benzene gas and much ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
Catalytic Combustion Corporation is an industry leader in catalyst manufacturing and has provided air quality solutions for nearly 60 years. Compliance assurance starts with a catalyst designed to meet the demands of the hostile environment found in industrial natural gas engines. The most active catalyst coating becomes ...
-
Manufactured by RB Technologiesbased in FRANCE
In situ O2 measurement is crucial in combustion management for industrial furnaces. A controlled stoichiometric oxygen excess is necessary to insure staff and equipement's safety, respect of production demands and efficiency by applying a ...
-
Manufactured by Industrial Combustionbased in USA
The Industrial Combustion M series burner forced draft design allows for tried and true trouble-free operation and superior efficiency on boiler, heater, furnace, kiln and dryer applications ...
-
Manufactured by Eneraque Pty Ltdbased in AUSTRALIA
or as a reliable means for disposing industrial gases. Our high temperature industrial gas flares provide safe and environmentally-friendly combustion of industrial ...
-
Manufactured by Inproheat Industries Ltd.based in CANADA
Inproheat Industries offers Flame Scanners through John Zink Hamworthy Combustion, Chentronics. The iScan Scanner model is a powerful tool that combines signal processor and scanning technology into a single product. Using a familiar Windows software platform, this scanner ensures that data from flame signals, specific burners and the ...
-
Manufactured by ARSTA ECO PRIVATE LIMITEDbased in INDIA
, an upgraded biomass fuel is produced, with favorable combustion properties. Biocarbon has a great potential as solid fuel in small scale boilers and stoves and also industrial co-combustion plants, partially substituting fossil coal. Biocarbon is considered as “green coal” and are carbon neutral. Biocarbon is also used in the ...
-
Manufactured by Stelter & Brinck, Ltdbased in USA
Our non-recirculating indirect fired heaters are designed to heat your process stream without contamination by products of combustion. This indirect industrial air heating system comes completely prepiped and prewired- ready for a turn-key on-site installation. Stelter & Brinck's non-recirculating indirect fired air heaters offer a low ...
-
Manufactured by Inproheat Industries Ltd.based in CANADA
The use of fossil fuels has contributed to industrialization enormously, but this has resulted in an increase of CO2 in the Earth’s atmosphere. The challenge to many industries is the requirement to heat large volumes of water or aqueous solutions efficiently – which usually requires a combustion process. With our experience ...
-
Manufactured by Binder Energietechnik GmbHbased in AUSTRIA
Combustion unit with hydraulically or electro-mechanically operated grate, for combustion of wet materials with high ash content. Fully automatic de-ashing of the combustion unit with ash scraper below grate and ash auger. Completely refractory lined and Stochiometrically designed primary and secondary combustion air zones. ...
-
Manufactured by Gasmaster Industries Ltd.based in CANADA
Dual fuel industrial boiler capable of heating up to 160 apartment ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you