Combustion System Control Equipment
-
Manufactured by SteEnova GmbHbased in GERMANY
can only be used fully with OptiPro, an air management control ...
-
Manufactured by FER Strumenti Srlbased in ITALY
Oxygen Measurement, Carbon monoxide extractive measurement with electrochemical cell, Temperature measurement, Semi-extractive approach with mounting directly to the stack, Easy installation, Simplicity of ...
-
Manufactured by ClearSign Combustion Corporationbased in USA
Electrically charged molecules, or ions, are a natural product of the combustion process. ClearSign’s Electrodynamic Combustion Control technology introduces computer-controlled electric fields to manipulate the movement of these ions and precisely control flame shape and the transfer of heat to, through, ...
-
Manufactured by Bambeck Systemsbased in USA
Stoichiometric Combustion Control creates a condition in the process heater where there is just enough oxygen (O2) available to oxidize each hydrogen and carbon atom from the fuel. To achieve this condition, you starve the combustion air until some carbon atoms cannot continuously get enough O2 in the radiant section of the heater and CO is ...
-
Manufactured by Bambeck Systemsbased in USA
Stoichiometric Combustion Control creates a condition in the boiler where there is just enough oxygen (O2) available to oxidize each hydrogen and carbon atom from the fuel. To achieve this condition, you starve the combustion air until some carbon atoms cannot continuously get enough O2 in the furnace section of the boiler and CO is formed ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
LEANOX is a lean-mixture combustion control. It was developed by GE's Jenbacher and has been patented worldwide. The system ensures the correct air to gas ratio under all operating conditions. This has the benefit of minimising exhaust gas emissions whilst maintaining stable engine ...
-
Manufactured by ACL Combustion Inc.based in USA
The ACL Forced Draft CSC400-FD Combustion Safety Controller is a leading edge burner management system which provides burner ignition and air/fuel ratio control for forced draft burner applications. It monitors three separate thermocouple inputs that can be used for temperature control in process applications ...
-
Manufactured by LAMTEC America Inc.based in USA
The CMS offers absolute flexibility in the design and control of your combustion control system. CMS incorporates up to 18 analogue inputs (or 9 failsafe), 41 digital outputs, 60 digital inputs, and 10 channels for actuator/drive control depending upon module hardware configuration. Internally, CMS can provide up ...
-
Manufactured by Fireye Inc.based in USA
The Nexus® NXF4000 model offers integrated burner management with an electronic parallel positioning and O2 trim combustion control system. The Fireye NXF4000 is an advanced burner management controller with internal flame safeguard, designed to operate burners firing liquid or gaseous fuels. NXF4000 supports up to 4 servos ...
-
Manufactured by Clean Combustion Technologies ABbased in SWEDEN
Clean Combustion provide Burner Control System with Siemens PLC and HMI or ABB/Allen Bradley/Honeywell PLC and HMI. With our prefered use of Siemens SIMATIC hardware components we ensure compliance to industry standards (NFPA, IEC, and ANSI/ISA). This gives our system increased safety and system availability, ...
-
Manufactured by Clean Combustion Technologies ABbased in SWEDEN
Clean Combustion Flame Control System serves several functions, Flame Detection, Thermal Analysis and Flame Shape Monitor. The Flame Detection function detects the presence of a flame in the flame zone. Flame Monitor Camera assists the operators while tuning the burner, assisting to achieve better combustion performance and ...
-
Manufactured by Swebo Bioenergybased in SWEDEN
The SWEBO S-series comprises a number of different smart storage tank modules, which are each driven by hydraulic scrapers, to allow the least expensive storage tank (S6) to be constructed in kit form, measuring 2.8 x 1.2 metres (max. 2 wide) and with 2 different wall heights. The storage tank is supplied unassembled, for an inexpensive but high quality solution. The storage tank can handle loads ...
-
Manufactured by Conveco Srlbased in ITALY
, safety devices, automatic air damper, thermocouple and combustion temperature control system. Operation is fully ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
; catalytic combustor technology is a breakthrough, reducing emissions with improved combustion efficiency by preventing the emissions from forming in the first place. This offers a substantial capital and operating cost savings compared to much larger and more complex post-combustion NOx control systems such as Selective ...
-
Manufactured by Dryairbased in USA
Diesel fired for optimal flexibility. Enclosed trailer with storage for the heat exchangers, manifolds and hoses. This unit can dry up to 20,000 ...
-
Manufactured by Dryairbased in USA
All the great features of the larger Greenthaw models in a smaller footprint. Patented Flow Reverser - Eliminates hot and cold zones in the thaw pattern. Reduces time & fuel costs by up to 50%. Consistent curing temperatures across the entire slab – the whole slab cures faster at the same ...
-
Manufactured by Dryairbased in USA
With its class leading 896,000 BTU’s the 900 GTS greenthaw has the heating power to take on the biggest jobs and still has all the great features of our smaller ...
-
Manufactured by Dryairbased in USA
Class leading BTU’s in a compact size!! The 200GTS greenthaw can be placed in tight spaces allowing the unit to go where other ground thaw units cannot. Integrated lifting hooks and fork pockets assist in placement. The tow pole is easily removed to further reduce the footprint of the 200GTS on the ...
-
Distributed by Nuergybased in UNITED KINGDOM
Janfire Steam Jet from 750kW to 2000kW, 1tph to 3.2tph steam. The Steam Jet Biomass System is unique as it has effectively the smallest foot print in the industry. Janfire System Jet is well proven and been in production for the past 30 ...
-
Manufactured by Stelter & Brinck, Ltdbased in USA
Stelter & Brinckscrap preheatersboth dry and preheat at the same time. These units are designed to fit on top of material conveyors and weigh feeders intended for use with preheating. The units are completely self contained and feature high turn down, high velocity burner systems to provide high air flow rates for drying and high ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you