Combustion Temperature Equipment
-
Manufactured by Conveco S.r.l.based in ITALY
High temperature biogas extraction and combustion unit. Can be designed and built to meet the specific needs of the end user without limits concerning dimensions, instrumentation, capacities and ...
-
Manufactured by SAACKE GmbHbased in GERMANY
If space is limited, the hot gas generators of the CCS-HTcompact series are often the first choice. The CCS-HTcompact consists of a double steel shell, lined with refractory bricks inside. Optimised for natural gas combustion systems, a SAACKE SSB-G is used as the burner, which generates a moderate combustion chamber temperature thanks to a ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The NOXmatic comprises the most up-to-date quality gas are technology ensuring the safe, efficient and environmentally friendly combustion of gases from landfill, bio and sewage gas systems. Depending on the application parameters and the required combustion characteristics, the ares are supplied as either low or medium temperature units ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
requires the logging and forwarding of the gas quantity and combustion data. In addition to flow rate and combustion measurement sensors with signal output, ennox delivers required gas flare systems, condensate drainage,gas cleaning, volume flow rate- and combustion temperature measurements components and compressor for CDM ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The high temperature are is the further developed NOXmatic are for the safe and low-emission combustion of land ll, bio or other special gases within a temperature range from 1000 – 1200 °C. In this temperature range the oxidising gas com- ponents are fully processed, thus greatly reducing the formation of nitrogen ...
-
Manufactured by C-nox GmbH & Co. KGbased in GERMANY
Thanks to the modular system, the most economical solution is available for every application. Design examples for all biogases, sewage gases or synthetic gases for combustion temperatures of up to ...
-
Manufactured by C-nox GmbH & Co. KGbased in GERMANY
LCH flares (medium-temperature flares) are excellent for emergency disposal installations with constant methane concentrations (calorific values). The pre-set air supply ensures the correct combustion temperature and dwell time for the combustion gas. In this variant, once again only high quality components are used fulfilling ...
-
based in UNITED KINGDOM
This range of simple elevated flares is typically used for short term applications (such as gas pumping trials) or those where exhaust gas emissions are not subject to regulation. The combustion process is visible and the combustion temperature is not ...
-
Manufactured by Conveco Srlbased in ITALY
HT-S Type are high-performance enclosed ground flare stacks where biogas combustion temperature, flame retention time and destruction efficiency are the results to be achieved. Combustion occurs inside the base refractory combustion chamber and is completed in the upper cylindrical chamber lined with fiberceramic, under a ...
-
Manufactured by Encore Combustionbased in USA
Provides ground based, completely hidden combustion process. Provides smokeless combustion of heavy waste gas vapors. The combination of residence time, elevated combustion temperatures, and a turbulent mixing zone create greater combustion ...
-
Manufactured by AAT Abwasser- und Abfalltechnik GmbHbased in AUSTRIA
Details: Flow rate: 50-1.800 m³/h. Material: Stainless steel 1.440X (SS316). Gas pressure > 25 mbar. Condensate outlet by ball valve. Manual valve. Motor valve. ATEX flame arrester. Automatic ignition equipment. Temperature measurement by means of thermal element. Combustion temperature: approx. 900°C. Anchoring device. ...
-
Manufactured by Kermetico, Inc.based in USA
, combustion temperature and thrust of the HVAF | HVOF gun. Fuel gas options: propane, propylene, natural gas, propane-butane, MAPP gas. Blast & spray operation is possible. Works in HVOF system mode + Economy, Balanced or Ultra HVAF modes. Fully compliant with most existing HVOF standards. Air cooling (no need for water chiller, mobile friendly). ...
-
Manufactured by Lekea - Dan Trim ApSbased in DENMARK
The Lekea MK 130/160 boiler is designed for heating with 80x80cm straw bales. The burner chamber is manufactured from strong steel sheet and fitted with a firebrick at the top, thus ensuring the high combustion temperature and efficient fluegas combustion. The fluegas convector made from strong steel pipes transfers the heat to the ...
-
Manufactured by Conveco Srlbased in ITALY
Open flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation. The EMR flares family includes units for biogas flows from 10 to 250 Nm3/hr and is characterized by compact dimensions, simplified design, ease of installation. The ST version is an elevated ...
-
Manufactured by Conveco Srlbased in ITALY
EMR ADV flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation but it is required that the flame is partially hidden and contained inside a combustion chamber. The multi-nozzle burner and the particular design, size and features of the combustion ...
-
Manufactured by C-nox GmbH & Co. KGbased in GERMANY
of down to 12% can be burned without the need for support gas. Here again, the controlled gas/air ratio ensures the required combustion temperature of >1000 °C inside the combustion chamber. ...
-
Manufactured by Organics Group plcbased in UNITED KINGDOM
Shrouded flame flares with no visible flame and automated control of combustion air allowing a combustion temperature of 1,000ºC and 0.5 seconds retention ...
-
Manufactured by C-nox GmbH & Co. KGbased in GERMANY
High-Temperature Flares for environmentally compatible combustion, lean gases require added support gas, such as natural gas or propane. Here again, the controlled gas/air ratio ensures the required combustion temperature of >1000 °C inside the combustion chamber. As a variation from the standard ...
-
Manufactured by Combution Concept Pvt. Ltd.based in INDIA
Duobloc with unmatched flexibility. All liquid fuels indicated can be burnt efficiently. All burners are modulating type suitable for continuous fuel regulation. High efficiency, low maintainance and long service life. Can be supplied for combustion air temperatures upto 400 degree C. Fully Automatic with excellent safety features. Separate ...
-
Manufactured by Encore Combustionbased in USA
Suitable for use in all bio-gas applications – landfill, wastewater treatment, food processing, breweries, etc.. Provides ground based, completely hidden combustion process. Provides smokeless combustion. The combination of residence time, elevated combustion temperatures, and a turbulent mixing zone create greater ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you