Show results for
Refine by
Combustion Turbine Equipment & Supplies
45 equipment items found
Manufactured by:Powerphase International based inJupiter, FLORIDA (USA)
The Turbophase system is an innovative air injection technology designed to enhance the performance and efficiency of combustion turbines. It addresses the common issue of reduced turbine output due to ambient temperature fluctuations by injecting hot, high-pressure air directly into the compressor. This process increases mass flow and ...
by:Babcock & Wilcox based inCharlotte, NORTH CAROLINA (USA)
B&W's Heat Recovery Steam Generator (HRSG) is a product of more than 145 years of steam generation experience and innovative research and technology leadership. Each HRSG is custom designed to maximize the recovery of energy from your combustion ...
Premium
Manufactured by:Continental Controls Corporation (CCC) based inSan Diego, CALIFORNIA (USA)
The Continental Controls Corporation AGV pilot valve is a critical component of gas turbine engine control systems. It is a compact, lightweight, and easy-to-install device that helps to improve engine performance and reliability. The AGV pilot valve is responsible for controlling the flow of fuel and air in the engine, ensuring that the engine operates at optimal levels of efficiency and safety. ...
Manufactured by:Allied Environmental Technologies, Inc. based inSeal Beach, CALIFORNIA (USA)
Gas turbines (or combustion turbines) are available in a range of sizes. Gas turbines are used mainly above 1 MW, though smaller units – microturbines – are produced in sizes less than 200 kW. Gas turbines can operate in different cycle configurations, ...
by:Nooter/Eriksen - part of the CIC Group based inSt Louis, MISSOURI (USA)
Saturated steam is injected into the oil field to reduce the viscosity of the oil and improve the percentage recovery. Nooter/Eriksen supplies EORs that are installed at the exhaust of a combustion turbine; thereby recovering exhaust gas energy and, at the same time, providing steam for the oil ...
Manufactured by:Frontline BioEnergy, LLC based inNevada, IOWA (USA)
Our process can also supply power to internal combustion engines, combustion turbines, utility boilers, and high-pressure steam turbines to produce ...
Manufactured by:Dürr Systems, Inc. based inDe Pere, WISCONSIN (USA)
Often there are multiple technologies required for combustion turbine projects. Dürr Universal recommends designing a fully integrated, custom system, rather than buying individual pieces of equipment from multiple manufacturers with varying materials. This integrated gas turbine solution includes various combinations of clean, safe and efficient ...
Manufactured by:SPL Control Inc. based inBrantford, ONTARIO (CANADA)
The SPL Control design team has more than 45 years of experience designing gas turbine exhaust systems that reliably operate in the most demanding conditions. Typically used for peaking power or gas compressor station applications, simple cycle gas turbine exhaust systems take the brunt of the combustion turbine’s ...
Manufactured by:EML Manufacturing, LLC based inHouston, TEXAS (USA)
Fuel Gas Conditioning System for treatment of turbine or combustion turbine fuel gas are also known as Fuel Gas Skid, Fuel Gas System and Fuel Gas Filtration and Heating. The treatment of fuel gas is crucial to the performance and longevity of gas turbine. In certain cases, gas turbine fuel gas treatment is ...
Manufactured by:Schock Manufacturing based inOwasso, OKLAHOMA (USA)
Your liner system is not a "one size fits all". We custom design each system and decide using CFD modeling and Combustion Turbine data to determine which liner system to apply throughout the system. ...
Manufactured by:Fisher Energy based inHouston, TEXAS (USA)
Fisher Energy Gas Conditioning Systems are designed for the treatment of natural gas for use as combustion turbine and engine fuel gas, as well as for processing and treating prior to transmission & distribution. In these applications, filtration and conditioning of natural gas is required for the performance of the turbine/engine, as well ...
Manufactured by:Powerphase International based inJupiter, FLORIDA (USA)
The FastLight Storage Engine is an innovative technology designed by Powerphase International for efficient grid-scale renewable energy storage. Utilizing existing gas turbines, this system converts surplus renewable or off-peak energy into compressed air, stored for both short and long-term use. This method significantly reduces the cost and environmental impact compared to ...
Manufactured by:PBS Velká Bíteš, a.s. based inVelká Bíteš, CZECH REPUBLIC
PBS ignition is designed to generate voltage impulses for two spark plugs, in the spark gap of which the jumping spark ignites the fuel-air mixture in the APU turbine combustion ...
Manufactured by:PBS Velká Bíteš, a.s. based inVelká Bíteš, CZECH REPUBLIC
PBS single-channel ignition is designed to generate voltage impulses for a spark plug, in the spark gap of which the jumping spark ignites the fuel-air mixture in the APU turbine combustion chamber or jet ...
Manufactured by:Hy-Pro Filtration based inAnderson, INDIANA (USA)
When combustion and steam turbines fall victim to unit trip or fail-to-start condition varnish is the usual suspect. SVR Soluble Varnish Removal skids prevent and remove varnish deposit formation in lube oil by removing oxidation by-products as they are formed and while they still in solution (dissolved). ...
Manufactured by:Fives I.T.A.S. s.p.a. based inMonza, ITALY
ITAS builds complete systems - turn key - with burners that can be arranged for accepting the combustion products coming from turbines where cogeneration is ...
Manufactured by:G-TOPS Co., Ltd. based inSeoul, SOUTH KOREA
1) Combustion Chamber Parts • EV Burner • Shielding Cone • Support Cylinder • Lower Combustion Chamber Insert • Hot Gas Casting 2) Turbine Parts • Blades • Vanes • Heat Shield Segment 3) Manufacture & Repair • Parts & Components of Gas Turbine 4) 100% Compatible with GE, ABB, ...
Manufactured by:PBS Velká Bíteš, a.s. based inVelká Bíteš, CZECH REPUBLIC
The PBS TJ150 engines with a maximum thrust of 1,500 N represent powerful turbojet engines based on the PBS TJ100 design. While maintaining the same outer diameter and engine weight, they deliver 20% more thrust, making them ideal for various high-speed unmanned aerial vehicles and defense ...
Manufactured by:PBS Velká Bíteš, a.s. based inVelká Bíteš, CZECH REPUBLIC
The PBS TJ100 are the most popular turbojet engines from PBS, with some variants achieving worldwide success. The engines are sought after for their compact design, excellent thrust-to-weight ratio, low fuel consumption in their performance category, and the ability to restart on the ground or ...
Manufactured by:UNEW Inc. based inStuart, FLORIDA (USA)
At UNEW we strive to make our parts and service better than the competition. Better performance, longer lasting, more cost efficient and supported with faster service. We bring to the market the finest IGT parts available today. Our Turbine parts are engineered to eliminate compromises and deliver maximum value by providing more durable, superior quality and higher performing replacement parts at ...