Combustor Equipment
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of handling varying emission flow rates and concentration ...
-
Manufactured by Thruster Technologiesbased in USA
It's flexibility and long list of features and capabilities provide versatile functionality for a range of ...
-
Manufactured by Flame Smartbased in USA
Equipped with a Flame Smart Ei and FS-1-i ignition unit, the Flame Smart 10 is a competent pilot maintainer BMS package for combustor pilots operating at up to 10,000 BTU/hr. Additional pieces include a ¼-inch solenoid valve for enhanced safety and flame ...
-
Manufactured by Flame Smartbased in USA
Equipped with a Flame Smart Ei and FSL-F ignition unit, the Flame Smart 20 is the premier BMS package for flares or combustors operating at up to 20,000 BTU/hr. Additional pieces include a Flame Smart Air & Fuel Mixer for enhanced safety and flame ...
-
Manufactured by Flame Smartbased in USA
Equipped with a Flame Smart Ei+ and FSL-F ignition unit, the Flame Smart 20 Plus is the ideal BMS package for combustors operating at up to 20,000 BTU/hr. Requiring only minimal set point adjustments, the Ei+ monitors the pilot utilizing the igniter as the flame-sensing ...
-
Manufactured by Thruster Technologiesbased in USA
It's flexibility and long list of features and capabilities provide versatile functionality for a range of ...
-
Manufactured by ACL Combustion Inc.based in USA
ACL combustors are a patented high volume combustion device with up to 1,800,000 scf/d (high pressure) or 100,000 scf/d (low pressure) flow rate capacity for destroying fugitive emissions: tank, casing, or vent gas vapors. Higher volume high pressure combustion can be achieved with taller than standard ...
-
Manufactured by Thruster Technologiesbased in USA
It's flexibility and long list of features and capabilities provide versatile functionality for a range of ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or VRUs. When enclosed ...
-
Manufactured by Hilliard Emission Controls, Inc. / PURGITbased in USA
PURGIT operates a turn-key mobile combustor service for sites all over the United States. Both enclosed combustors and open flares are kept in stock and ready to deploy for applications ranging from above-ground storage tank degassing to truck and railcar loading/cleaning events. Our project coordinators have over three decades of ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
led to the development of oxy-fuel combustion in both pulverized coal plants and turbine power cycles for its promise of elimination of nitric oxide (NOx) emissions at the high combustor temperatures required for efficiency. This is achieved through burning fuel with pure oxygen yielding only carbon dioxide and water in the exhaust ...
-
Manufactured by Plantec Asia Pacific Pte. Ltd.based in SINGAPORE
Turning waste into fuel for perfect combustion. SLA Combustion Method – Turning waste into dried solid residues and combustible gas. The Vertical Combustor employs ‘SLA Combustion Method’ invented by Plantec Inc., parent company of Plantec Argonaut Pte. ...
-
Manufactured by Thruster Technologiesbased in USA
Have a difficult project? Let our experienced engineering staff custom design your next combustor project. Whether its a simple combustor with Inlet Air Arrestors, or a full custom electronics system, we are here to help make sure your application is a ...
-
Manufactured by EnviroExperts Italia Srlbased in ITALY
A side of the diagram of a catalytic combustor in the series 'Skorpio'. Deparia Engineering has considerable experience in the design and manufacture of catalytic combustors and ...
-
Manufactured by Process Combustion Corporation (PCC)based in USA
Reduce air pollution emissions from a variety of industrial processes. Process Combustion’s vapor combustors are a simple, effective means of processing gaseous streams that cannot be emitted to the atmosphere. In addition to being a cost-conscious solution, our equipment is designed to maximize fuel efficiency while offering ...
-
Manufactured by Clean Energy Systems, Inc. (CES)based in USA
The Clean Energy Systems reheat combustor, or reheater, dramatically improves the efficiency of combined steam and gas turbine power cycles by boosting the drive gas to turbine inlet temperatures typically associated with gas turbines and even beyond. The principles behind the reheater are essentially the same as applied in the CES drive ...
-
Manufactured by Swebo Bioenergybased in SWEDEN
The SWEBO BioTherm is the result of a research and development project lasting many years and, like so many of our other products, it has made a significant impression on the market. Among other fuels, the burner can burn challenging fuels such as horse and chicken manure, extremely moist chips (with a moisture content of up to 61%), offal, etc. In other words, it is a genuine ...
-
Manufactured by EnviroExperts Italia Srlbased in ITALY
A good alternative to catalytic combustion, when the concentrations of volatile organic compounds in the flue gas fall in a range between 2% and 50% of the lower explosion limit and the temperature of the effluent to be purified not exceed 200 ° C, is represented by thermal combustion with regenerative heat recovery. The Regenerative ...
-
Manufactured by e-flox GmbHbased in GERMANY
The compact design LCV combustor was originally designed to serve PSA digester gas upgrading systems for municipal biogas or sewags sludge fermenters. It is able to burn up to 100 Nm³/h (NCMH) of LCV gas. For methane concentrations in the LCV gas of 7 Vol% it can burn the gas without auxiliary fuel. Up to 15 Vol% is possible. The ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Hydrocarbon vapors may be destroyed in a flare, combustor or a thermal oxidizer. For many applications, a simple vapor combustor can be successfully used as a safe and economical method of controlling vapors from the handling, storage, or loading of volatile liquid hydrocarbons or other compounds when recovery of the vapors is not a viable ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you