Compact Heat Exchanger Equipment
-
Manufactured by Clean Energy Systems, Inc. (CES)based in USA
Clean Energy Systems, Inc. has opened a new division named HEXCES to focus on the design, development, manufacture, and service of compact platelet heat exchangers (CPHXs). Also known as printed circuit heat exchangers (PCHEs), these devices provide efficient thermal management solutions across a variety of ...
-
Manufactured by Vacuum Process Engineering (VPE)based in USA
VPE Thermal offers its diffusion bonded microchannel heat exchanger technology in a wide selection of compact-sized, commercial (off-the-shelf) compact/miniature heat exchangers. Furthermore, these high-reliability, compact heat ...
-
Manufactured by Inproheat Industries Ltd.based in CANADA
Inproheat Industries offers Compact Welded heat exchangers from Tranter and Nexson. These heat exchangers are defined by an assembly of plates that are usually washboard-patterned-embossed or herringbone with almost all of the design material being involved in the heat transfer process. Every ...
-
based in UNITED KINGDOM
Charge air coolers to improve the volumetric efficiency of engines, Charge air coolers reduce the air temperature as it enters the engine to improve the volumetric efficiency. It’s located between the turbocharger or supercharger and the engine inlet. The equipment is cooled by water and uses finned tubes to remove heat from the ...
-
based in UNITED KINGDOM
Air-cooled gas coolers to remove excess heat from a gas stream. Excess heat from a gas stream is lost to the atmosphere while the gas product is cooled close to ambient temperatures. Air-cooled gas coolers are used to remove this excess heat. Air-cooled gas coolers are used for a range of applications. These include CO2 cooling in ...
-
based in UNITED KINGDOM
Avantair is a high-performance cooling solution that uses heat pipes (also known as thermosyphons) to transfer energy from a generator to the surrounding environment using forced air movement and an extended finned ...
-
based in UNITED KINGDOM
Air coolers to cool the air intake of your process. Air is used as an integral part of process arrangements. The temperature of the air supplied must be carefully controlled to optimise the efficiency of a process. We can cool your airstream to do ...
-
Manufactured by KELVION INC. / PHEbased in USA
conditions for the processing and short-time storage of sensitive products. The air in the room is drawn in by the fans and exhausted via the heat exchangers on both ...
-
Manufactured by KELVION INC. / PHEbased in USA
The RF-S is the condenser series with capacities from 6.4 kW - 183 kW. The GF-S is our gas cooler series with 9.5 kW - 174 ...
-
Manufactured by KELVION INC. / PHEbased in USA
If the pressure is on; we keep it cool. With the new CBF/CSF range in the lineup you are well prepared for operating pressures up to 90 bar. The CBF is the blow through version as the CSF is the draw-through variant. All coils are optimized for natural refrigerants like R744 (CO2) and R290 (Propane) and make it a perfect choice for cooling and freezing ...
-
Manufactured by KELVION INC. / PHEbased in USA
Both versions can be used for temperatures ranging from -40°C to +40°C and are suitable for synthetic and natural refrigerants. The CDK model has a capacity range from 7.33kw up to 145.3kw (SC2), while the CDL version, with stainless steel tubes, offers a range from 8.9kw to 154kw. The fans are mounted to the outside of the cooler and operate at the optimal speed required for large ...
-
Manufactured by KELVION INC. / PHEbased in USA
The RF condenser series with capacities from 24 kW - 1409 kW. The NF NH3 condenser with capacities 11 kW - 1130 kW. The GF gas cooler series with 30.6 kW - 1424 ...
-
Manufactured by KELVION INC. / PHEbased in USA
LF-S Drycooler with capacities from 8-125 kW. Kelvion has re-engineered the popular LF-SJ. We have optimised the coil sizing for new generation fans to get additional benefits of an even higher efficiency ...
-
Manufactured by KELVION INC. / PHEbased in USA
Pushing forward with innovative Ideas: The Flatbed range has been developed specifically to reflect the latest market requirements. Reduced footprint,lower noise level, improved capacity density and the greatest flexibility through configurable options to suit all ...
-
Manufactured by Boilerroom Equipment, Inc (BEI)based in USA
BEI can engineer and manufacture both natural and forced circulation waste heat boilers. The watertube design allows for high performance compact heat exchangers often at low flue gas pressure drops, ease of installation, and often the ability to incorporate the HeatSponge replaceable tube for easy long term maintenance. The ...
-
Manufactured by THALETEC GmbHbased in GERMANY
Glass lined compact heat exchangers consisting of tubes made of SiC (silicon carbide) may be used for heat exchange in corrosive applications where both material flows are corrosive. In addition, the heat exchangers are extremely compact due to the excellent ...
-
Distributed by Valutech Inc.based in CANADA
Compact brazed heat exchangers provide the all the advantages and efficiencies of a plate heat exchanger while providing capabilities of a large duty in a small footprint. The compact brazed heat exchangers are typically used for a wide array of both industrial ...
-
Manufactured by Eureka Heat Recovery Systems Ltdbased in UNITED KINGDOM
The Eureka Heat Winner is a fully-insulated, ready-to-install compact heat exchange unit ft is available as a single exchanger unit or with miitipje exchangers located within a single housing. The Eureka Heat Winner is ideally suited for the production of Low Grade Hot Water ...
-
Manufactured by Vacuum Process Engineering (VPE)based in USA
VPE Thermal LLC, a subsidiary of VPE, manufactures custom diffusion bonded microchannel heat exchangers (MCHEs), also known as printed circuit heat exchangers (PCHEs), for a diverse range of industries. Furthermore, these compact heat exchangers are ideally suited for ...
-
Manufactured by KELVION INC. / PHEbased in USA
This new addition to our product line is a compact heat exchanger made from high-alloyed stainless steel and can handle temperatures up to 550°C. Its compact and modular design makes it extremely versatile and easy to service. Our exhaust gas heat exchanger is designed to recover ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you