Enclosed Flare Equipment In Europe
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control ...
-
Manufactured by Conveco Srlbased in ITALY
Enclosed flares HE and HTE type burn biogas in a cylindric enclosure fitted with a high-resistance fiberceramic insulation lining which ensures high combustion efficiency and limitation of both rumbling and radiation. Design of the burner and of the combustion chamber as well as the selection of construction material and ancillary equipment ...
-
Manufactured by Conveco Srlbased in ITALY
EMR ADV flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation but it is required that the flame is partially hidden and contained inside a combustion chamber. The multi-nozzle burner and the particular design, size and features of the combustion chamber ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Momentum Biogas series of elevated flares is our most economical line of combustion equipment for the biogas sector, offering a cost-effective solution with rapid delivery. Momentum flares utilize a specially designed “burner and shroud” system to manage the intricate mixing with ambient air to provide a high DRE (98%) and ...
-
Manufactured by G.I. Dynamicsbased in NETHERLANDS
Improvement of air quality is one of the key concerns to sustainable development worldwide. As strict environmental regulations are being enacted to protect the public and minimize harmful atmospheric emissions, our Clients look at us to develop solutions that meet regulatory compliance and allow them to operate cost effectively in an environmentally responsible and sustainable ...
-
Manufactured by Conveco Srlbased in ITALY
HT-E series consist of enclosed ground flares specifically developed for installation in biomass plants where biogas combustion at full-flow is not expected to be required continuously, instead only occasionally when, for instance, engines are being serviced. Combustion occurs inside the cylindrical chamber under a controlled environment, ...
-
Manufactured by Conveco Srlbased in ITALY
HT-S Type are high-performance enclosed ground flare stacks where biogas combustion temperature, flame retention time and destruction efficiency are the results to be achieved. Combustion occurs inside the base refractory combustion chamber and is completed in the upper cylindrical chamber lined with fiberceramic, under a controlled ...
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
Enclosed ground flares are used to destroy waste gases without radiation effects or visible flames, and with limited noise, minimized footprint and visual impact. Fives offers a range of ITAS enclosed ground flares whose burners and stack are designed to accommodate the thermal requirements of enclosed flames. ...
-
Manufactured by Uniflare Ltd.based in UNITED KINGDOM
The UFO-ENV range of flares are predominantly used on AD Plants and Waste Water Treatment Plants as emergency flares where the criteria for the flare is that it needs an invisible flame but does not need to meet emissions standards due to the hours of operation it would ever perform. Again Uniflare designs and manufactures these to our ...
-
based in UNITED KINGDOM
The LD range of flares is used for biogas de-gassing applications, typically used with anaerobic digestion plant, synthetic (pyrolysis) gas plant and for landfill gas environmental control. The extracted gas is burnt in an enclosed flare stack in a controlled combustion process which, when required, ensures compliance with the UK ...
-
based in UNITED KINGDOM
for power generation is automatically burnt in an enclosed flare stack in a controlled combustion process which, when required, ensures compliance with the UK Environment Agency exhaust gas emissions limits. Turndown ratios of up to 10:1 can be ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
The FAII biogas flare is an automatic, enclosed gas flare for combustion of biogas and other combustible gases, fully complying with the widely applied German air pollution regulation TA Luft. +500 references in more than 50 countries witness the robustness of our FAII flares! Available in a rage of 20 - 3.000 Nm3/h, at ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or VRUs. When enclosed ...
-
based in UNITED KINGDOM
Landfill Systems are worldwide innovators in low calorie gas flare technology. Our LC range of high performance gas flares has been specifically developed to address the need to safely dispose of low flows of landfill gas or flows of gas with low methane content, such as are increasingly found on aged landfill sites. Gas flows with a ...
-
Manufactured by Europem N.Vbased in BELGIUM
Since the 1980’s, key staff of Europem have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications.Europem’s extensive experience in flare design has resulted in a comprehensive range of elevated and ground ...
-
Manufactured by Europem N.Vbased in BELGIUM
Since the 1980’s, key staff of Nutara have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications. Nutara designs are optimized towards flexibility, robustness, low emissions, high thermal efficiency and ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the waste gas stream, improves combustion efficiency and smokeless performance. These flares ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you