Refine by
Enclosed Flares Systems Equipment & Supplies
27 equipment items found
Manufactured by:HiLo Group USA Inc. based inWarrenton, GEORGIA (US) (USA)
Controls Flow Rate. No Visible Flame or Radiating Heat. Ceramic Lined. Cleanest Flare in Operation. Built in Safety Features. Cost Efficient. Reliable. Easy to Operate. Exceeds All Environmental ...
Manufactured by:Catalytic Combustion Corporation (CCC) based inBloomer, WISCONSIN (USA)
The CCC Enclosed Flare can be used for many applications that include: Biogas, Digester gas, Landfill ...
Manufactured by:Product Recovery Management, Inc.(PRM) based inButner, NORTH CAROLINA (USA)
PRM Flare Systems are used for controlling Methane (CH4) and Carbon Dioxide (CO2), as by-products of Landfill Bio-degradation. PRM specializes in designing and manufacturing flares for landfill applications up to 10000 SCFM with destruction rates of up to 98% efficiency. Other markets include waste-water and agricultural ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
We design Enclosed ground flares when waste gases are requested to be flared in an enclosed stack, with reduced flame visibility, minimal heat and noise, emissions sampling, ease, and smokeless combustion, in sensitive areas. The stack is internally refractory lined, designed for low and medium flows, has high destruction ...
Manufactured by:Encore Combustion based inAustin, TEXAS (USA)
Suitable for use in all bio-gas applications – landfill, wastewater treatment, food processing, breweries, etc.. Provides ground based, completely hidden combustion process. Provides smokeless combustion. The combination of residence time, elevated combustion temperatures, and a turbulent mixing zone create greater combustion efficiency. Temperature controlled to ensure the highest ...
Manufactured by:Perennial Energy based inWest Plains, MONTANA (USA)
PEI designs and manufactures Enclosed Flare Systems and stand-alone Enclosed Flares (EGF) that meet or exceed most air quality regulatory management agency requirements for maximum by-product of combustion emissions and minimum destruction and reduction efficiencies (DRE). Various burner technologies are ...
Manufactured by:Alliance Thermal Engineers Pvt Ltd based inPune, INDIA
Enclosed type bio gas flare system design features: Smokeless Capacity: 100%. Destruction efficiency: 99 %. Operating temperature: 800 – 1000 Deg C the process parameters shall be set at this temperature for PLC operation. Retention time: > 0.30 seconds (minimum) at 800 – 1000 Deg C. Gas pressure at flare inlet: ...
Manufactured by:Super Fabtech India based inPune, INDIA
It is our pleasure to introduce our concern as one of the leading Manufacturer and suppliers & Exporter of Open & Closed Biogas Flaring system to Domestic as well as International Market. Our offered ranges of flaring systems are highly appreciated by the clients . ...
Manufactured by:John Zink Hamworthy Combustion based inTulsa, OKLAHOMA (USA)
Our enclosed ground flare systems combust waste gases cleanly and efficiently by eliminating smoke and minimizing noise and visible flame from conventional flaring. Enclosed flares are customized to client specifications to achieve excellence in overall system performance using ...
Manufactured by:Callidus Technologies - part of UOP, a Honeywell Company based inTulsa, OKLAHOMA (USA)
UOP Callidus Totally Enclosed Ground Flare (TEGF) system was originally designed to eliminate light and noise from flaring waste gases. This flare has been used extensively in the combustion of waste gases from chemical plants, hydrocarbon loading terminals, FPSO floating production vessels, refineries, and any ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Our Titan Demountable Flares, also named demountable derricks, are derrick-supported flares with three, or four leg configurations and overall heights of up to 200 meters. Designed to accommodate several risers/tips on the same derrick structure. Each flare tip has its own set of pilots. The demountable system allows maintenance at grade on each flare tip while keeping the other flare systems in ...
Manufactured by:Parnel Biogas, Inc. based inGlenpool, OKLAHOMA (USA)
The solution to landfill gas control begins with the selection of a company that specializes in just that! At Parnel Biogas Inc. we are dedicated to providing you with a quality product and prompt response/service from sales thru fabrication, installation, start-up and ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Utility flares (DU series) are one of the most common flare designs use for applications with no smokeless burning requirements. They are also utilized in applications where smokeless flaring can be achieved without the use of an additional assist ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Pit Flare (or “Burn Pit”) is usually constructed of an excavation lined with a non-combustible lining of rock or refractory material. Often coupled with a pit liner, our pit flares can be a cost-effective combustion option for an environmentally conscious user. Our high efficiency burner produces a mixture of vapor and liquid from a single source. While most often designed to ...
Manufactured by:Baker Furnace - a brand by Thermal Product Solutions based inYorba Linda, CALIFORNIA (USA)
Baker Furnace is a leading-edge manufacturer of Enclosed Ground Flare systems (also described in the industry as Methane Combustors, Vapor Combustors, or Thermal Oxidizers) for oil field methane ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
We design and supply Multipoint Ground Flares (MPGF) when very large flows are required to be flared in an array enclosed configuration. This system is characterized by multiple stages, with first stage(s) provided with assist support such as gas, air, steam for high smokeless performance at low regimes, and the upper stages ...
by:Synchronous International Engineering Solutions Co. Ltd. based inBangkok, THAILAND
SIES Enclosed FLare are versatile in design and suitable for total destruction of waste gas/vapors. These Systems are designed to meet local environmental norms and can also be customized as per CDM regulations. Our Enclosed Flare/Thermal oxidizers system incorporates the latest technology and ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
To dispose of heavy waste gases, which have a greater tendency to smoke, in a smokeless manner, we provide three different design options, depending on customer requirements. Air Assisted Flares, which utilize forced air from blower(s) to provide assist air for combustion and promotes additional air entrain from the ambient due to the relatively high exit speed of the streams. Steam Assisted ...
Manufactured by:HiTemp Tech Corporation based inRingoes, NEW JERSEY (USA)
HiTemp has developed a system that mixes the methane stream with sufficient combustion air to maintain a consistent temperature assuring maximum destruction of any methane present in the exhaust ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Pressure Assisted Flares: Mach 1 sonic / Start fire / SN / Variable slot VMSA. Our cutting-edge MACH-1 sonic flaring technology, suitable for both off-shore and onshore installations, utilizes high pressure flare gas to establish an exit velocity equal to the speed of sound to combust waste gas ...