Energy Production Equipment In Denmark
-
PremiumManufactured by EnviTec Biogas AGbased in GERMANY
; about half a tonne per year per person. In addition to saving you the trouble of disposing of your residual products, our biogas technology also makes it possible for you to convert the waste into useful ...
-
by Crestwingbased in DENMARK
Crestwing is working with leading scientists and PhD students at Aarhus University, Danish Technical University, Stanford, Harvard and Aalborg University on optimizing the system and the first Wave Energy Converter (WEC) pilot park. The pilot park is planned to begin commissioning in 2025. The supply chain is already in place, with, among ...
-
Manufactured by The Switch - a Yaskawa Companybased in FINLAND
The Switch medium-speed PMGs operate with a single- or two-stage gearbox at a generator speed of typically between 100 rpm and 500 rpm. Combining the advantages of low- and high-speed technology, these PMGs offer extremely high availability and reliability, resulting in increased annual energy production ...
-
Manufactured by Solid Wind Power Europe ApSbased in DENMARK
SWP-25kW is a Class 3-wind turbine based on proven technology which ensures high energy production. SWP-25kW is a Class 3-turbine based on proven technology which ensures high energy production, a long and problem-free life cycle and, not least, a very low noise level. It can also be delivered in a 10kW version, which is optimal ...
-
Manufactured by LM Wind Powerbased in DENMARK
and loads, has proven to increase Annual Energy Production (AEP) by up to 14 % for blades in 2.5-3.3 MW segment. These highly efficient blades expand the possibilities for power generation in wind class II-IV around the world and again prove the validity of LM Wind Power’s blade design philosophy resulting in reducing the total Cost of ...
-
Manufactured by Solid Wind Power Europe ApSbased in DENMARK
SWP-19.8kW is a Class 3-wind turbine based on proven technology which ensures high energy production. SWP-20kW is a rock solid Class 2-wind turbine which has been developed for sites especially abundant with wind. The wind turbine is based on proven technology which ensures high energy production and a long and problem-free life ...
-
Manufactured by Vestas Wind Systems A/Sbased in DENMARK
The V162-7.2 MW™ features flexible rating, designed to deliver optimised energy production even with greater temperature and climate variations. Designed with full value chain in mind, the V162-7.2 MW™ realises improved transportability of the nacelle unit, as well as the flexibility to service and upgrades over the ...
-
Manufactured by Vestas Wind Systems A/Sbased in DENMARK
The V163-4.5 MW, featuring a large rotor-size-to-rating ratio, helps you realise stable energy output and up to 10% more Annual Energy Production at park level under medium to low wind ...
-
Manufactured by Solid Wind Power Europe ApSbased in DENMARK
19.8kW/20kW (14TG) is a rock solid Class 2-wind turbine, grid connected according to CEI - which has been developed for sites especially abundant with wind. SWP-20kW is a rock solid Class 2-wind turbine which has been developed for sites especially abundant with wind. The wind turbine is based on proven technology which ensures high ...
-
Manufactured by Dantonit A/Sbased in DENMARK
DantoCon Thermal C2H is used for environmental sealing and thermal optimisation of geothermal energy wells. The product is delivered as a ready to mix dry powder and needs only to be mixed with freshwater before use. Mixed with water, DantoCon Thermal C2H yields a sealing mixture, which combines high thermal conductivity with the ...
-
based in DENMARK
Thermal power is the most effective and environmentally friendly form of controlled production of energy. Producing electricity and heat at the same time makes use of nearly all the fuel energy, which is a great advantage both economically and ...
-
Manufactured by SolarLabbased in DENMARK
The randomly and individually articulated panels of the Sequins family provide a lively and highly expressive facade cladding that continuously change with the daylight and the viewer. The subtlety of these color changes can be tailored, as can the dimensions of the individual panels to fit the desired building ...
-
Manufactured by Fiberline Composites A / Sbased in DENMARK
of expansion and a unique, documented adhesion to the surface of the fibreglass composite make structural glazing a strong, elegant, and energy-efficient facade ...
-
Manufactured by Racellbased in DENMARK
Racell’s solutions provide you not only with an abundance of energy but also with an architechtual solution that elevates the building in a sustainable way. If you are entrigued, contact us and togehter we will find the right solution for you. ...
-
Manufactured by Bevi ABbased in SWEDEN
Soft starters with torque control start which provides additional 20% lower start currents compared to conventional soft starters. Reduced start currents and mechanical stress means lower installation, energy and maintenance ...
-
Manufactured by SolarLabbased in DENMARK
The overlapping panels of the Scales family provides a depth to the facade and a texture that add life and character to the panelisation. With build heights as low as 80 mm this ventilated cladding solution can be customized both in dimensions and ...
-
Manufactured by Burmeister & Wain Scandinavian Contractor A/S (BWSC)based in DENMARK
Large biogas plants are mainly used for: Treatment and utilisation of a wide range of wet or semi-dry renewable biomass energy resources for production of methane gas as energy carrier. Reduction of environmental load of organic waste disposal. On-site or off-site Combined Heat and Power (CHP) generation or alternative use of methane ...
-
Manufactured by Nordic Wind Technology ApSbased in DENMARK
slip and thus operate within a limited speed range. In combination with the pitch system this ensures an optimized energy performance within a wide wind rage with low ...
-
Manufactured by Nordic Wind Technology ApSbased in DENMARK
Suzlon inducted the S82 turbine in 2006 and phased out production in 2015. During these years a combined capacity of around 3034.5 MW was installed worldwide. S82 turbines contain an asynchronous generator with a SFS (Suzlon Flexi Slip) system enabling the generator to run with a high slip and operate within a restricted speed range. This ...
-
Manufactured by Nordic Wind Technology ApSbased in DENMARK
Suzlon began manufacturing their S6X series wind turbines in 2002 and eventually phased out production in 2016. A cumulative capacity of 3673.75 MW is installed worldwide counting S64 and similar turbines like the S62 and S70. S64 turbines are built to deliver an optimum output in locations with low to medium wind speed regimes. The ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you