Flare Burner Equipment
-
Manufactured by Alternate Energy Systems, Inc.based in USA
Test Flares are used during system setup, and for periodical system tests and maintenance. They represent large loads, and allow the system to be tested under simulated load conditions. AES manufactures standard test flares with 2" or 3" gas lines. Other flares for specific systems are available as customer specials. All AES test ...
-
Manufactured by Flare Products Limitedbased in UNITED KINGDOM
The standard burner is normally used on applications where flame retention time and temperature are not so critical. Typically on this type of burner the size remains constant and quantity increases depending on the gas flow ...
-
Manufactured by Flare Products Limitedbased in UNITED KINGDOM
The high temperature burner is used for achieving a higher level of flame control and temperature. The flame is much shorter on this type of burner sitting just above the air ports. With this type of burner a temperature of 950 -1000°C can be expected without automatic air control. High temperature burners are generally ...
-
Manufactured by PBS Power Equipment, s.r.o.based in CZECH REPUBLIC
Automatic gas burners of the series APH-M guarantee the burning, while burning low-pressure and medium-pressure propane, propane-butane, biogas, sewage and degasation gas. Burners comply with technical requirements ČSN EN 676, ČSN 07 5801; consequently, they can be used for broad spectrum of burning and technological equipment. ...
-
Manufactured by Ship & Shore Environmental, Inc.based in USA
Emission regulations and compliance issues are no longer a problem with a low NOx flare alternative vapor combustor. This low NOx flare alternative emits the lowest emissions achievable (NOx, CO, unburned CxHy’s), while maintaining greater than 99.99% destruction efficiency. This means that you will not only be able to ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec 244W Series is a highly reliable flare and ignition system. It utilizes a patented pilot ignition system that mixes pilot gas and air at ground level to provide a robust, high temperature pilot. The pilot is ignited away from the flare stack. This reduces wear and tear and allows routine maintenance to be carried out without ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec 239A Series Waste Gas Burner is designed for burning biogas generated in the anaerobic digestion process. Burning or flaring to the atmosphere reduces the potential odor nuisance from venting directly to the atmosphere. This burner is suitable for burning low volumes of biogas, which is typically very 'wet', with a low BTU value ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec Biogas 249 Series Enclosed Flare is a flare specifically designed for biogas application. It is primarily used in areas where flare stack emissions are controlled and regulated. The sophisticated design of the 249 Series is a top-of-the-line, full-featured, drop-ship product, where all eventualities have been carefully ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec Biogas 244E Enclosed Burner Systems are designed to burn biogas efficiently and safely over a wide range of operating parameters. With no visible flame, the 244E systems use an innovative stack design to naturally induce the proper amount of combustion air which guarantees high destruction removal ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301 Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300M is a low cost, basic, Waste Gas Burner designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This unit has no visible flame which makes it ideal for residential areas. ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300 Waste Gas Burner is designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97310 Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or governmental ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The modern preparation of biogas to more efficient, use and transport friendlier biomethane becomes more and more popular. During preparation of the biogas, removal of CO2 and other basic components of the gas resutls in a dramatic change of the gas specific Wobbe Index and therefore new requirements for specification of the flare burner. ...
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
The "Fyrhed Water Curtain 360" nozzle provides a 360° circular, wide, hollow cone spray pattern. It is developed for heavy duty applications, such as structural protection from heat radiation generated by flare/burner operation on oil ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The Demountable Flare System features a derrick structure with the one or multiple flare risers, mounted in such a way as to permit the lowering of the flare burner to grade for service without the need for an expensive heavy-duty crane. Further the flare burner is lowered to grade without the ...
-
Manufactured by LAMBDA Gesellschaft für Gastechnik mbHbased in GERMANY
The adaption of the flare system to the reduced gas amounts and methane contents is achieved by replacing the flare burner and reducing the combustion chamber diameter. For this purpose, the flare body is disassembled and the ceramic fibre insulation is removed in the lower section of the flare body. A reinforced ...
-
Manufactured by Europem N.Vbased in BELGIUM
calorific waste gas. Both air assisted and non-assisted flare burners are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you