Refine by
Flare Efficiency Measurement System Equipment & Supplies
170 equipment items found
Manufactured by:Explicit ApS based inVirum, DENMARK
A new highly accurate drone-based method of measuring the destruction removal efficiency (DRE) of flares. Sniffer drone tech enhances flare monitoring for sustainability. Developed by Explicit, the method uses a sniffer drone integrated with high performance gas and wind sensors. Flare destruction removal efficiency plays a crucial role in reducing environmental impact. By implementing precise ...
Manufactured by:Encore Thermoengineering S.R.L. based inMilano, ITALY
Guy-wired Flare Systems are designed for applications in which the flare height is up to 150 meters. Investment for guy-wired flare systems is generally lower than the other types of structural support; however, their installation requires a wider ...
Manufactured by:Encore Thermoengineering S.R.L. based inMilano, ITALY
Derrick structure (demountable type if requested) can be the optimum solution for Flare Systems installed inside plants, when higher elevation is required to limit ground radiation and available area is limited as a result of other present equipment. The height of this type of flare can be even more than 200 ...
Manufactured by:Phoenix Environmental Products USA based inBROWNSVILLE, TEXAS (USA)
FAV Systems Kimray Conversion Package makes for a more dependable and long lasting product. Our modifications create units that are far more suitable for sour applications, which reduces your maintenance ...
Manufactured by:Flare Products Limited based inStewartby, UNITED KINGDOM
Skid mounted flares provide that added flexibility that some sites require. Quick and easy to install, this type of flare can be relocated throughout the site to enable excess gas to be flared or to carry out pumping ...
Manufactured by:Phoenix Environmental Products USA based inBROWNSVILLE, TEXAS (USA)
FAV Systems Integrated Solutions Inc. developed the FAV Systems Variable - Slot flare system to provide 100% smokeless, low radiation, low luminance flaring without the need for an air blower or other assist ...
Manufactured by:Encore Thermoengineering S.R.L. based inMilano, ITALY
Self-supporting Flare Systems are selected when the flare height is lower than 50 meters. This solution is economical, easy to erect and requires relatively less installation ...
Manufactured by:Encore Thermoengineering S.R.L. based inMilano, ITALY
Derrick Guy-wired structure can be a good technical-commercial compromise for installation of flare packages very high in case of large clearance around the area and the need of a derrick structure to support the risers systems. The height of this type of flare can be even more than 200 ...
Manufactured by:Flare Products Limited based inStewartby, UNITED KINGDOM
At the top of the elevated system is the flare tip and pilot/ignitor system. The flare tip is sized according to the flow rate and is manufactured from 304 stainless steel. The larger diameter is the windshield which helps stabilise the flame. Located adjacent is the pilot/ignitor tip. This is made in 304 stainless steel and contains the pilot windshield nozzle and air injector for achieving ...
by:EnviroPro, Inc. based inHouston, TEXAS (USA)
Inner Air flare tip uses air tubes to bring air into the center of the flame envelope for smokeless operation. This design decreases the air to hydrocarbon for smokeless operation and operates quietly. The IA3 is used when the waste gas has higher flow rates and/or more smokeless capacity is required. The internal air-assisted flare tip has been in production since 2001 and is a very efficient, ...
Manufactured by:SPG Steiner GmbH based inSiegen, GERMANY
To flare without inconvenience of light and sound for the environment. For small part loads upon request or plant specific between 2 and 100t/h flare gas. For smaller incidents as well as for start up and shut down of the ...
Manufactured by:Tulsa Combustion based inSand Springs, OKLAHOMA (USA)
The safe disposal of waste gases is an especially strong arena for Tulsa Combustion’s senior staff. Each has decades of experience in product development, applications and trouble-shooting of flare systems. They are individually recognized as industry experts in the field, having authored numerous technical papers, conducted seminars, served on the API 521 Sub-committee and contributed to ...
Distributed by:GBA Flare Systems based inBurnham, UNITED KINGDOM
Where there is a need for smokeless combustion of low pressure, heavy waste gases but no steam is available then GBA Flare Systems CAF air assist flares can be used. CAF air assist flares use forced draft air to create turbulence and to supply the requisite primary air into the base of the flame thus achieving a clean, upright flame. For CAF air assist flares, the necessary air stream is provided ...
Manufactured by:Callidus Technologies - part of UOP, a Honeywell Company based inTulsa, OKLAHOMA (USA)
Callidus Technologies maintains an inventory of rental flares, oxidizers, combustors, and other equipment to provide quick, safe combustion solutions when regular equipment requires maintenance, becomes inoperable or a temporary solution is needed. Callidus Technologies can provide a rental unit from existing inventory, design a unit or modify an existing unit in a short amount of ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's utility flare design is an economical solution for emergency shut down (ESD) applications, compressor blowdowns, pigging, and cases where smoke emissions may not be a ...
Manufactured by:HiLo Group USA Inc. based inWarrenton, GEORGIA (US) (USA)
Controls Flow Rate. No Visible Flame or Radiating Heat. Ceramic Lined. Cleanest Flare in Operation. Built in Safety Features. Cost Efficient. Reliable. Easy to Operate. Exceeds All Environmental ...
Manufactured by:Airoil Flaregas Pvt. Ltd. based inDist. Mehsana, INDIA
The Velocity Seal, located integrally at the base of the flare tip, has been designed to prevent air ingress into the flare system and has a number of advantages over gas inversion ...
Manufactured by:Flare Products Limited based inStewartby, UNITED KINGDOM
The control panel is responsible for controlling and monitoring the flare system. The set up and operation is the same for elevated, ground or skid mounted flares. Depending on specification and scope, the control panel can take many different shapes or forms. It will typically contain indication lamps, e-stop, isolator, selector switches, relays, ignition transformer, timers and temperature ...
Manufactured by:Fives I.T.A.S. s.p.a. based inMonza, ITALY
ITAS, one of the world’s largest manufacturers of flare systems, offers complete flare control packages. ITAS experience with hundreds of flare systems ensures well-designed and proven controls ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's Momentum Series of non-assist flares provide smokeless performance without the need of additional air-blowers or assist gas for both high pressure and low pressure gas streams. Leveraging the increased momentum of gas that is passed through a simple nozzle or restricted opening, the waste gas intimately mixes with the ambient air and provides for smokeless operation while meeting all ...