Flare Fitting Equipment
-
Manufactured by Aimers Metal Craftbased in INDIA
Aimers Metal Craft manufactures a wide range of Flare Long Nut, Flare Male Connector, Flare Female Connector, Flare Stop Plug, Flare Tee Union, Flare Elbow Union, Flare Branch Tee,90° Flare Male Elbow,45° Flare Male Elbow,90° ...
-
Manufactured by BMT Co., Ltd.based in SOUTH KOREA
Size 1/8 to 2 in., 2 to 50 ...
-
Manufactured by Tube Clamps India Pvt. Ltd.based in INDIA
Manufacturer & supplier of JIC 37 Degree Flare Tube Fittings in India. A fitting flare is a sleeve that aligns the tube to the fitting body axis along with minimizing the mechanical strain on the tube. 37 Degree Flare Fittings are available in a wide range of configurations ...
-
Manufactured by Siddhagiri Metals and Tubesbased in INDIA
Flare Fitting is made up of a nut, sleeve and body with a flare or coned end. Often, the sleeve is used as a self-flaring option, usually on the thinner wall or softer tubing materials. Flare Fittings can handle high pressures because of its larger seal area and is available in a variety of alloy ...
-
Manufactured by Boshart Industriesbased in CANADA
Nipple Specification ASTM A733. Thread Specification ANSI B.1.20.1. LIST PRICE PER UNIT. When ordering Black Nipples, Part No. starts with BLN-. PRICE CODE - W. CRN Number for Steel Nipples ...
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
multipoint ground flares fit into many applications with no limitation of the gas flow rate. ...
-
Manufactured by LTC Healthcarebased in UNITED KINGDOM
EXS Magnum Extra Large Condoms have been developed for those who need a condom larger than regular, Magnum has a length of 190mm and is 60mm wide. A thin condom wall of only 0.073mm is subtle enough to prevent that feeling of a barrier between you and your partner. An anatomical fit with flared head and teat tip also enhances comfort and ...
-
Manufactured by LTC Healthcarebased in UNITED KINGDOM
EXS Regular Condoms provide protection against pregnancy and sexually transmitted infections, including HIV. These condoms are characterised by an anatomical fit with flared head and teat tip. Thanks to their easy-on design, these condoms are easy to roll and ultra-comfortable to wear. Thinner than other regular condoms yet strong ...
-
Manufactured by Phillips & Temro Industriesbased in USA
Shut-off thermostats control fuel temperature for any coolant fuel heater. Coolant flow stops when fuel temperature reaches a certain point to save you ...
-
Manufactured by McMillan Companybased in USA
McMillan Model 106S FLO-SENSORS are capable of measuring extremely low liquid flow rates from 15 mL/minute up to 50 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a ...
-
Manufactured by AAT Abwasser- und Abfalltechnik GmbHbased in AUSTRIA
Longevity ensured by high-quality materials. AAT flares of type FA 50-1800 are used for the combustion of bio,-sewage-or landfill gas. The flares are made completely of stainless steel which makes them robust to weather influences and heat. The partially covered combustion protects the flames against wind and prevents ...
-
Manufactured by Hilliard Emission Controls, Inc. / PURGITbased in USA
PURGIT operates a turn-key mobile flare service for sites all over the United States. Both enclosed combustors and open flares are kept in stock and ready to deploy for applications ranging from above-ground storage tank degassing to truck and railcar loading/cleaning events. Our project coordinators have over five decades of experience and ...
-
Manufactured by McMillan Companybased in USA
McMillan Model 106 FLO-SENSORS are capable of measuring extremely low liquid flow rates from 15 mL/minute up to 10 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a ...
-
Manufactured by Beckettbased in USA
The Beckett models AF & AFG burner are designed to meet the increased demands of modern equipment and changing fuels to meet both performance and carbon reduction challenges. Beckett burners utilize the most technologically advanced components available today and are UL Listed up to 100% biodiesel (B100) and compliant with 100% renewable diesel (R100) to give consumers reliable performance ...
-
Manufactured by LAMBDA Gesellschaft für Gastechnik mbHbased in GERMANY
The adaption of the flare system to the reduced gas amounts and methane contents is achieved by replacing the flare burner and reducing the combustion chamber diameter. For this purpose, the flare body is disassembled and the ceramic fibre insulation is removed in the lower section of the flare body. A reinforced base plate is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you