Flaring Equipment In Australasia
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The modern preparation of biogas to more efficient, use and transport friendlier biomethane becomes more and more popular. During preparation of the biogas, removal of CO2 and other basic components of the gas resutls in a dramatic change of the gas specific Wobbe Index and therefore new requirements for specification of the flare burner. ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The NOXmatic comprises the most up-to-date quality gas are technology ensuring the safe, efficient and environmentally friendly combustion of gases from landfill, bio and sewage gas systems. Depending on the application parameters and the required combustion characteristics, the ares are supplied as either low or medium temperature units supplied with the required additional burner technology. ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The high temperature are is the further developed NOXmatic are for the safe and low-emission combustion of land ll, bio or other special gases within a temperature range from 1000 – 1200 °C. In this temperature range the oxidising gas com- ponents are fully processed, thus greatly reducing the formation of nitrogen ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Since the implementation of the Kyoto treaty the industry has seen a widespread development and tightening of regulations governing greenhouse emissions for the reduction of CO emissions. The issuing of the so called CO certificate not only calls for the Methane gas to be to be burnt in gas flares according to the UNFCC regulations, but ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The low-price solution for the price-conscious farmer! Robust and compact manual gas flare for burning off biogas at agricultural biogas plants. Perfect for smaller new plants and for retro fitting to existing biogas plants. The operation of the eco gas are with a fermenter pressure of 3 mbar is possible although a minimum operating pressure of ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
In general the design for those flares is the same as for our standard flares. In accordance with the project-specific requirements (for example special gas composition, high gas temperatures or pollution) specific technical solutions and equipment are added. In principle all pyrolysis gas flares are individually customized, ...
-
Manufactured by Gasco Pty Ltd.based in AUSTRALIA
Flares, also known as gas flares and flare stacks, are a gas combustion device used in industrial plants such as petroleum refineries, chemical plants, and natural gas processing plants as well as at oil or gas production sites having oil wells, gas wells, offshore oil and gas rigs and landfills. Gasco, along with our technology partner, ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Momentum Biogas series of elevated flares is our most economical line of combustion equipment for the biogas sector, offering a cost-effective solution with rapid delivery. Momentum flares utilize a specially designed “burner and shroud” system to manage the intricate mixing with ambient air to provide a high DRE (98%) and ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium. Utility flares therefore, do not require auxiliary gas ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Pit Flares are generally selected and designed in order to combust a mixture of vapor and liquid from a single source. While most often designed to operate non-smokelessly, through use of Flare Industries’ various Pit Flare technologies, smokeless operation can often be achieved. The flare pit (or “Burn Pit”) is ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). Utility flares ...
-
Manufactured by Windsor Engineeringbased in NEW ZEALAND
Utilising waste gas in process heating or power generation (gas engine) is a preferred method of disposal, but sometimes it is impractical due to distance from a suitable site. Flaring gas is the best alternative in this situation. A temporary flare may also be required for co-generation standby systems and during landfill ...
-
Manufactured by Ennovobased in AUSTRALIA
Our elevated flare range of open flare stacks provides a good degree of control over the combustion process in an elevated flame burner, whilst remaining highly flexible and portable. They are ideal for temporary or emergency mobile systems on landfill sites, or can be used at sewerage treatment works and other anaerobic ...
-
Manufactured by Zeeco, Inc.based in USA
The world’s most in-demand flare for the world’s most punishing conditions. Zeeco’s UF series utility flare is ideal for onshore or offshore applications that do not require smokeless performance or where smokeless flaring can be managed without air or steam assist. Our UF flare series is one of the most ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control within the ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Every year, millions of tons of household garbage and other refuse are deposited in landfills around the world. Biochemical decomposition processes of organic bonds in these landfills produce up to 150 – 250 m³ of landfill gases per tonne of household garbage. Due to a methane content of up to 60%, landfill gas ranks number six on the list of climate-disrupting methane producers ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the waste gas stream, improves combustion efficiency and smokeless performance. These flares ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Carbon dioxide is often used in fire extinguishers and snuffing systems with the intention of effectively extinguishing flames. When CO2 gas is a large percentage of a waste gas stream, at times it proves difficult to maintain a lit flare without the use of assist gas or a properly designed flame ring. Flare Industries’ industry-proven ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you