Flaring Application Equipment
-
based in UNITED KINGDOM
The LG range of flares is used for combined biogas de-gassing and utilisation applications, typically used with anaerobic digestion plant, synthetic (pyrolysis) gas plant and for landfill gas environmental control. They include systems for delivering gas at controlled pressure for power generation. That portion of extracted gas which is not ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The Steam Assisted Smokeless flare tips are the most efficient flare tips utilizing external steam nozzles in addition to central steam nozzles and are suitable for sites where a general low noise flare tip is required. The Steam-Assisted Smokeless Flare tips are based on externally mixing steam and air with the gas at the point ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The purpose of a liquid (commonly water) seal drums in a flare gas system in threefold: Performance Features. It operates as a non-return device preventing interaction from the outlet to the inlet of the drum. It operates as an upstream pressure relief valve preventing gas flow from the inlet to the outlet until a particular upstream ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The Velocity Seal, located integrally at the base of the flare tip, has been designed to prevent air ingress into the flare system and has a number of advantages over gas inversion ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The Molecular Seal is located just below the flare tip and has been designed to prevent air ingress to the flare riser thus preventing the formation of an explosive mixture in the system. The seal is a gas inversion device causing the gas normally flowing in an upward direction to be turned through 180 degrees in the original direction of the ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The Non-Smokeless flare tips are used where the environmental condition allows the burning of smoke producing gases. They are also used with gases which produce either no smoke or so little that smoke suppression with steam, air or high pressure gas is not required. Examples of gas used with these tips are Hydrogen, Blast Furnace waste gas, ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
AFG Combustion’s flare pilots are suitable for use on all types of Elevated Flare Tips, Ground flares and Burn Pits, in the worst weather conditions which may exist off-shore or on-shore, from sub-zero ambient conditions of Antarctica to the sand/wind storms of Middle East and Africa. The pilots have very wide application ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The Air-Assisted Smokeless Flare Tip is used for smokeless combustion applications, where the use of steam is not desired. Smokeless combustion can be obtained even with heavy unsaturated hydrocarbon gases. ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The Demountable Flare System features a derrick structure with the one or multiple flare risers, mounted in such a way as to permit the lowering of the flare burner to grade for service without the need for an expensive heavy-duty crane. Further the flare burner is lowered to grade without the need of any personnel to climb to ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
Optimization of an Elevated Staged Flare for a Large Refinery or a Gas Plant. In recent years most of the refineries, petrochemicals & gas processing plants are seen to be of larger capacities. Flare system for such plant are required to operate at two extreme flow conditions, one very high flow rates (in excess of 1000 tons per ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's E2T Quasar M8100 series instruments provide continuous monitoring and detection of flare stack pilot (PM), smoke (SM), and flares (FM). Flame detection up to 400 m away. Detection of hydrocarbon and hydrogen flames. CSA/US and ATEX explosion-proof housing. Automatic gain control for adverse weather conditions. Modular ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Every year, millions of tons of household garbage and other refuse are deposited in landfills around the world. Biochemical decomposition processes of organic bonds in these landfills produce up to 150 – 250 m³ of landfill gases per tonne of household garbage. Due to a methane content of up to 60%, landfill gas ranks number six on the list of climate-disrupting methane producers ...
-
PremiumManufactured by Gazpack B.V.based in NETHERLANDS
Gazpack is all aware that gas flaring is becoming a major area of concern in today’s growing market where the emphasis is hugely focused on the negative environmental impacts and how we can change these practices quickly and efficiently. Therefore Gazpack has way to shut down flares without pollution. Blended flare quencher are ...
-
Manufactured by Hero Flare LLCbased in USA
For most flare applications, it is critical that all liquid be removed from the waste gas prior to being sent to the flare. Hero provides complete liquid knockout systems that range from small low flow manual dump systems to a fully automated liquid level control ...
-
Manufactured by Flame Smartbased in USA
Built for demanding flare applications, the Flame Smart 60 is the ideal BMS package for open flares operating between 20,000 and 60,000 BTU/hr. This package includes a Flame Smart Venturi for enhanced safety and flame stability. ...
-
Distributed by GBA Flare Systemsbased in UNITED KINGDOM
. This is supplemented by a centre steam nozzle located within the tip body. The GBA GCT flare tip provides a good all-round solution for most low pressure smokeless flare applications. The GCT incorporates several features that greatly enhance service ...
-
Manufactured by Hero Flare LLCbased in USA
The HERO Low Flow Flare is specifically designed for low flow flare applications, or for those sites located in remote locations and do not have access to electric or pilot fuel gas. The most common application is flaring off low pressure tank vapors and remote ...
-
Manufactured by Stackmatch Flare Ignition, Inc.based in USA
STACKMATCH has an array of High Energy Ignition systems that can be used in your existing or new Flare Pilot application. Insert a STACKMATCH Ignition Probe into your pilot and know that your pilot will ignite and re-ignite whenever it is supposed to. Our Ignition Probes can be designed around any Pilot application. We’ll build to ...
-
Manufactured by BMT Co., Ltd.based in SOUTH KOREA
Application: Flaring, Cutting ring assembly & Ferrule swing. Applicable Fitting Types: Double Ferrule Compression Type Fitting, DIN 2353 Bite Type Fitting. Tube O.D: 1/2 to 42 ...
-
Manufactured by Hero Flare LLCbased in USA
Hero Flare offers an excellent alternative to elevated flares for those applications where an exposed flame is not desirable. The Hero Enclosed Combustors are designed to provide a smokeless burn in accordance with the Quad O ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you