Flaring System Equipment In USA
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). Utility ...
-
based in USA
SOLVING COMPLEX PROBLEMS for global industries is nothing new for John Zink Hamworthy Combustion. Over the years, we’ve led the advancement of flare design and clean flare technologies for upstream, downstream, and biogas flare industries, transforming yesterday’s fired equipment into sophisticated, low-emissions ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
A flare stack refers to an elevated vertical stack used for burning off unusable waste gas in a variety of oil and gas production applications. Waste gases are either uneconomical to recover/retain, or released during planned or unplanned over-pressuring of plant equipment. Waste gases are released to the flare via piping (flare header) and ...
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
ITAS, one of the world’s largest manufacturers of flare systems, offers complete flare control packages. ITAS experience with hundreds of flare systems ensures well-designed and proven controls ...
-
Manufactured by HiLo Group USA Inc.based in USA
Controls Flow Rate. No Visible Flame or Radiating Heat. Ceramic Lined. Cleanest Flare in Operation. Built in Safety Features. Cost Efficient. Reliable. Easy to Operate. Exceeds All Environmental ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
The CCC Enclosed Flare can be used for many applications that include: Biogas, Digester gas, Landfill ...
-
Manufactured by ASHCORbased in USA
The ASHCOR Sonic Flare is equipped with a high-pressure tip that uses the energy of the high-pressure gas steam for smokeless combustion and a reduced purge rate. The Sonic Flare System’s features allow for lower radiation levels and reduce required stack height. Its operation is controlled by incoming flare gas pressure ...
-
Manufactured by MRW Technologies, Inc.based in USA
Whether your application has low pressure or high pressure, combustible or non-combustible gas, small or large flow, MRW can offer a solution. Our systems have proven successful worldwide in industries ranging from: Gas Processing, Oil & Gas Production, Midstream, Chemical & Petrochemical, Landfill, Petroleum Refining, ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Momentum Series of non-assist flares provide smokeless performance without the need of additional air-blowers or assist gas for both high pressure and low pressure gas streams. Leveraging the increased momentum of gas that is passed through a simple nozzle or restricted opening, the waste gas intimately mixes with the ambient ...
-
Manufactured by ClearSign Combustion Corporationbased in USA
All refineries and petrochemical plants have flares as a safety device. During plant start-up, or when an unexpected situation arises causing a buildup of pressurized hydrocarbon gases, the excess gas is vented through a pipe to a centralized location on the refinery grounds. There are many such sources of high-pressure gas in a ...
-
Manufactured by Encore Combustionbased in USA
Pre-engineered flare systems to reduce cost and improve delivery. Multiple flare sizes to suit the customer’s application. EPA OOOOa compliant. 40 CFR 60.18 compliant. 98%+ VOC destruction efficiency. Elevated flare with visible ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
This high duty and high smokeless capacity flare system features significantly higher surface to area relationship for waste gas exit compared to single tip designs. This design can facilitate mixing over the widest possible range of flow rates. ...
-
Manufactured by Baker Furnace - a brand by Thermal Product Solutionsbased in USA
Baker Furnace is a leading-edge manufacturer of Enclosed Ground Flare systems (also described in the industry as Methane Combustors, Vapor Combustors, or Thermal Oxidizers) for oil field methane ...
-
Manufactured by Product Recovery Management, Inc.(PRM)based in USA
PRM Flare Systems are used for controlling Methane (CH4) and Carbon Dioxide (CO2), as by-products of Landfill Bio-degradation. PRM specializes in designing and manufacturing flares for landfill applications up to 10000 SCFM with destruction rates of up to 98% efficiency. Other markets include waste-water and agricultural ...
-
Manufactured by Flare and Vapor Systems Corpbased in USA
FAV Systems Integrated Solutions Inc. developed the FAV Systems Variable - Slot flare system to provide 100% smokeless, low radiation, low luminance flaring without the need for an air blower or other assist ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
The Demountable flare system provides flexible flaring operations to so that you can place multiple risers on a single support structure. They also allow you to perform maintenance to the tip at grade with minimal use of personnel at elevation. The demountable flare system features a derrick with the riser or ...
-
Manufactured by MRW Technologies, Inc.based in USA
Staged ground flares are utilized for smokeless combustion of large volumes of waste gas flow with high turndown. They are commonly used in LNG and gas processing facilities. Due to the nature of these applications, staged ground flares are designed to handle streams over a wide pressure range and variety of ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
An FKO (fluid knockout) is a low-pressure separator used on a vent line to remove liquids from a waste gas stream prior to being flared or incinerated. This can prevent water from freezing in the flare stack riser or liquid carryover from being sprayed over immediate area (burning rain). Alberta – All combustion systems in Alberta ...
-
Manufactured by Epcon Industrial Systems, LPbased in USA
Principle: A combination of tangential, centrifugal and gravitational forces resulting in far more effective and superior separation of multiple fluid phases - supersonic, sonic and subsonic ...
-
Manufactured by ASHCORbased in USA
The ASHCOR High Pressure (HP) Flare System is constructed to use as a single high-pressure flow and is designed to meet the industry standard of flaring while protecting your site. ASHCOR HP flares can be scaled to fit individual site needs from 1.5 to 10 million scf/day. Each HP flare comes equipped with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you