Showing results for: Flue Gas Desulfurization Equipment
-
Manufactured by Ducon Technologies Inc.based in USA
Ducon mainly provides the following types of Flue Gas Desulfurization ...
-
based in CHINA
transfer resistance, greatly improving the mass transfer rate, and quickly completing the mass transfer process, thereby achieving the purpose of improving the desulfurization efficiency and achieving gas purification. Compared with the similar desulfurization technology, this technology has the advantages of high efficiency of ...
-
Manufactured by Hebei Huaqiang Technology & Development Co., Ltd.based in CHINA
By introduced American WESP and combined with customer’s requirements, we R&D a wet electro- static ...
-
Manufactured by Hebei Huaqiang Technology & Development Co., Ltd.based in CHINA
Flue gas enters the absorption tower from the air distributor at the bottom of the fluidized bed to fully mix with lime hydrate grains. SO2,SO3 and other harmful gases such as HCI and HF then react with lime hydrate to produce Ca ...
-
Manufactured by Chemical Process Piping Pvt. Ltd.based in INDIA
We manufacture FRP / GRP stacks for Power Plants and Flue Gas Desulphurization plants. The size of stack that we can manufacture are ranging upto 10 meter diameter. FRP / GRP has successfully replaced expensive and long lead time exotic steel lining / flake glass lining. Further, ease of installation and elimination of thermal insulation ...
-
Manufactured by RAFAKO SAbased in POLAND
RAFAKO S.A has been manufacturing rotary heat exchangers since 1959, over than, 850 heaters of various sizes (from 17 to 34.5) have been manufactured, including 16 horizontal axis heaters and one flue-gas heater for a desulphurization plant. As the technological advancement progressed, original bearing rotor heaters with upper bearing ...
-
Manufactured by Mimsan Groupbased in TURKEY
Desulphurisation is used to reduce the sulfur content to harmless levels in systems using high sulfur containing fuel.The working principle of this system is as follows. The flue gas containing sulfur and oxide components is sprayed with a liquid containing calcium sulphite / sulphate. The solids formed in the melt are eliminated in the ...
-
Manufactured by Apollo Goessnitz GmbHbased in GERMANY
Volute-casing pump according to chemical standard ISO 2858 . Q (m³/h) 1800. H (m) 220. P (bar) 16/25. T (°C) ...
-
Manufactured by Tricor Metals Incbased in USA
Special Applications: Tantalum units can be supplied with platinum spots. Custom designs to meet your specific requirements We also build shell and tube and plate heat ...
-
Manufactured by National Oilwell Varco (NOV)based in USA
The Model 20 HT/GT agitators feature a high-efficiency gearbox designed specifically for agitator service. Models are available in right angle and parallel shaft configurations. These agitators feature a modular design package with a wide range of speeds for improved process control and greater application versatility. The Model 20 HT/GT agitators are designed to meet AGMA, OSHA, ANSI, IEC, DIN, ...
-
Manufactured by Instal Filter SAbased in POLAND
Systems with mechanical reactor used by INSTAL FILTER SA are characterized by simple design. They work perfectly well in the processes of desulphurisation of stoker-fired boilers and provide obtaining reductions required by the IED Directive, when using different grades of coal. The solutions based on mechanical reactor are dedicated to small and medium capacity boilers, featuring variable ...
-
Manufactured by Shandong Baolan Environmental Protection Engineering Co., Ltdbased in CHINA
Semi-Dry Desulfurization Semi dry technology is a simple, low investment, high-performance desulfurization system, which covers a small area and is easy to access Semi dry desulfurization process refers to the process of adding desulfurizer in wet state and using flue gas sensible heat to ...
-
Manufactured by Tricor Metals Incbased in USA
Special Applications/Features; Mechanical (roller) expanded tube-to-tubesheet joints. Hydro-expanded tube-to-tubesheet joints. Seal-welded tube-to-tube sheet joints. Strength-welded tube-to-tube sheet joints. Thermal oxide coating designs for added erosion & corrosion resistance. Extended surface tubing available. Flush mount tube to tube sheet for full drain-ability. Polishing requirements ...
-
Manufactured by Tricor Metals Incbased in USA
Flush mount tube to tube sheet for full drainability, Polishing requirements up to 15 Ra, Double tube sheet design, Platinum spotting for tantalum units, Leak detection ports on loose lined tube sheets, Solid or explosive bonded design to fit your ...
-
Distributed by PCC Energy Groupbased in USA
PCC Energy Group produces a range of high-nickel, high-performance heat and corrosion resistant alloys available as flat products – plate, sheet and strip. In our facility dedicated to nickel alloys, we produce the industry’s largest available plate sizes with unparalleled ...
-
Manufactured by KC Cottrell, Incbased in USA
KC Cottrell Inc. can offer wide range of Flue Gas Desulphurization technologies from wet FGD to semi-dry and dry scrubber technologies which can cover large scale utility boilers to medium and smallsize industrial boilers, sintering plants, glass furnaces, biomass boilers and incinerators etc. One of the cutting edge technologies KC Cottrell ...
-
Manufactured by Eco Material Technologies Inc.based in USA
Fly ash – the most commonly used coal combustion product – is a remarkable material that cost-effectively improves the performance of products it is added to. For instance, in making concrete, cement is mixed with water to create the “glue” that holds strong aggregates together. Fly ash works in tandem with cement in the production of concrete products. Concrete containing ...
-
based in GERMANY
As pioneers of Circulating Fluidised Bed (CFB) technology, we deliver unrivalled expertise in maximising value through flexible and reliable boiler ...
-
Manufactured by Sumitomo SHI FWbased in FINLAND
Combining high-efficiency with fuel flexibility for reliable low-carbon power; Amid the net-zero transition, our customers are often looking for reliable, efficient energy solutions that can withstand challenging conditions – making circulating fluidized bed (CFB) boilers a valuable option. The boiler technology combines high-efficiency combustion with fuel flexibility. By using local ...
-
Manufactured by Sumitomo SHI FWbased in FINLAND
as well. Circulating Fluidized Bed Scrubbers (CFBS) are an efficient and flexible Flue Gas Cleaning (FGC) technology for removing a wide array of pollutants from flue gases from almost any combustion and industrial process. It’s suitable for a range of flue gas flow rates, from small industrial boilers to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you