Refine by
Forced Draft Burner Equipment & Supplies
32 equipment items found
by:Babcock Wanson - CNIM Group based inChevilly-Larue Cedex, FRANCE
The burners in the OPTIMO range are forced-draft burners. They form the heart of Babcock Wanson’s range and cover a wide range of power outputs and fuels while having very high energy and environmental ...
Manufactured by:Greens Combustion Limited based inPoole, UNITED KINGDOM
The GreenBurn MB is a register style staged air forced draft burner matched to Greens range of Marine Boilers.. The burner features a low NOx design whilst maintaining a high degree of flexibility with regard to turn down, fuel selection and ...
Manufactured by:ACL Combustion Inc. based inMoore, OKLAHOMA (USA)
The ACL Forced Draft CSC400-FD Combustion Safety Controller is a leading edge burner management system which provides burner ignition and air/fuel ratio control for forced draft burner applications. It monitors three separate thermocouple inputs that can be used for temperature ...
Manufactured by:Ferroli based inRiga, LATVIA
Floor standing boiler with cast iron heat exchanger for forced draft burner (gas / ...
Manufactured by:Duiker Combustion Engineers based inWateringen, NETHERLANDS
Duiker has an extensive portfolio of industrial forced draft burners for process heaters, furnaces and industrial boilers. These burners have been fine-tuned through proven technology to minimize emissions as well as economize design. They apply a high intensity swirl to generate an extremely stable turbulent flame, which in turn ...
Manufactured by:ICI Caldaie S.p.A based inFrazione Campagnola di Zevio, ITALY
Cylindrical furnace completely closed on the rear side by a convex bottom supported by a fully submerged stub. It can be used with forced draft burners for the operation on liquid or gaseous fuels. Designed for the use in systems with water temperature between 60 and ...
Manufactured by:Duiker Combustion Engineers based inWateringen, NETHERLANDS
Suitable for renewable fuels, operating with high combustion efficiency and low operational costs. Duiker has an extensive portfolio of industrial forced draft burners for process heaters, furnaces and industrial boilers. These burners can be engineered to customer requirements for combustion of gaseous or liquid fuels and are ...
Manufactured by:National Airoil Burner, Inc (NAO) based inPhiladelphia, PENNSYLVANIA (USA)
NAO flame arrestor burners used for NCG (non-condensable gases) in the pulp & paper industry. This unit shown is a forced draft FOUR stream waste burner -- including liquid turpentine and NCG ...
Manufactured by:Greens Combustion Limited based inPoole, UNITED KINGDOM
The GreenBurn® FD is a forced draught burner and like its sibling the ND uses the staged air principle of NOx reduction. Again this can be mounted in either vertical or horizontal orientation and with round or flat flame ...
Manufactured by:Simons Boilers Co based inAlexandria, AUSTRALIA
Simons Boiler is one of Australia’s largest distributors of European hot water boilers. ICI Caldaie REX hot water boiler is a three pass reverse flame wet back horizontal firetube boiler suitable for operation on either Gas or lights oil. The REX hot water boiler combines excellent reliability and durability with high thermal ...
Manufactured by:Greens Combustion Limited based inPoole, UNITED KINGDOM
The GreenBurn Supreme is a natural draft or forced dreaught floor mounted burner that uses a combination of staged air, staged fuel and internal flue gas recirculation to attain sub 50 mg/Nm3 NOx levels whilst producing a minimal amount of CO. With minimal footprint the burner is a step change in ultra low NOx ...
Manufactured by:Fives I.T.A.S. s.p.a. based inMonza, ITALY
Installed with a fired heater, a cracker furnace or a reformer, process burners are a critical element in the refining and petrochemical processes. Whatever the application, the technical requirements or project specifications, Fives designs and supplies a complete range of ITAS process burners, from engineering design to site assistance and supervision, revamping and training: ...
Manufactured by:ClearSign Combustion Corporation based inSeattle, WASHINGTON (USA)
Finally, a disruptive technology for new heaters and retrofit applications. Ultra Low NOx <5ppm: Cutting edge technology capable of meeting sub 5 ppm NOx guarantees in fielded applications. No Flame Impingement: Due to the arrangement of the burner and its combustion surfaces, flame dimensions are significantly reduced, making the burner suitable for retrofits in existing heaters that do not ...
Manufactured by:Rogue Combustion based inTulsa, OKLAHOMA (USA)
Ultra Low NOx lessthan 5ppm. Cutting edge technology capable of meeting sub 5 ppm NOx guarantees in fielded ...
Manufactured by:National Airoil Burner, Inc (NAO) based inPhiladelphia, PENNSYLVANIA (USA)
NAO flame arrestor burners used for NCG (non-condensable gases) in the pulp & paper industry. This unit shown is a forced draft FOUR stream waste burner -- including liquid turpentine and NCG ...
Manufactured by:Greens Combustion Limited based inPoole, UNITED KINGDOM
Haldor Topsoe are one of the world's leading licensors for steam reformers and they utilise rows of small radiant wall burners to populate the furnace wall. Such a design produces a uniform radiant heat from the furnace ...
Manufactured by:Zeeco, Inc. based inBroken Arrow, OKLAHOMA (USA)
The Zeeco CLSF Min-Emissions burner is an Ultra-Low NOx emissions round flame combination burner.The picture (right) is Zeeco’s CLSF Min-Emissions combination burner in operation. The reduced NOx emission from oil firing is achieved by “Pseudo Staging” of oil by our CB oil gun design. The result is a burner that can achieve very ...
Manufactured by:Gasco Pty Ltd. based inMelbourne, AUSTRALIA
Gasco supplies Fired Heaters to API 560 and ISO 13705 and proprietary Gasco forced draft convective ...
Manufactured by:Moffitt Corporation based inJacksonville Beach, FLORIDA (USA)
The Moffitt Air Turnover Unit (ATU) recirculates air within the building to maintain more uniform temperatures. Minimal equipment is required to prevent air stagnation and stratification. Additional options to provide heating, cooling, ventilation, and filtration are available. A base mounted air turnover unit costs less and are quicker to install than many other types of air movement ...
Manufactured by:ClearSign Technologies Corporation based inTulsa, OKLAHOMA (USA)
ClearSign Core™ Process Burner Technology represents a significant advancement in industrial heating applications, designed specifically for new heaters and retrofit situations. This technology delivers ultra-low NOx emissions of less than 5 ppm by optimizing the arrangement of the burner and combustion surfaces, thereby reducing flame dimensions. It ...