Francis Hydro Turbines Equipment & Supplies
11 equipment items found
Manufactured by:Siapro d.o.o. based inMOST NA SOČI, SLOVENIA
Francis turbine housing is filled with water, which means that all the impeller blades work the same force. Turbine power depends on the flow and direction of water flow on the impeller blades. To regulate the flow of water a Francis turbine has blades installed in the turbine casing. Blades in the casing are interconnected in a mechanism called the guide. Through changing the location of these ...
Manufactured by:The James Leffel & Company based inSpringfield, OHIO (USA)
Unit 1: 0.66 M Francis 2.0 MW / 82.2 M Head / 750 RPM. Unit 2: 0.47 M Francis 1.0 MW / 82.2 M Head / 1000 ...
Manufactured by:Tschurtschenthaler Turbinenbau GmbH based inSexten, ITALY
In the Francis turbine, water is fed to the impeller in a spiral channel. The blades adapt to the flow speed and water pressure changes caused by atmospheric conditions and seasons, for example. The water moves the curved blades of the impeller, which are connected to the generator. The Francis turbine requires a complex design, but offers maximum ...
Manufactured by:Vaptech Ltd. based inSofia, BULGARIA
Francis turbines are used mainly for medium heads and relatively low fluctuation of the water discharge. Francis turbines developed by VAPTECH demonstrate proven reliable performance in terms of efficiency, lack of cavitation and vibration in the complete specific speed range from ns 80 to ns 300. The runner is a welded or machined construction of high quality stainless steel. The runner is ...
Manufactured by:WWS Wasserkraft GmbH based inNeufelden, AUSTRIA
The Francis turbine – also know as “excess pressure turbine” – is usually installed for medium heads of water and constant water quantities. This type of turbine mostly uses a steel spiral turbine, since there is often a tube line leading to the turbine at heads of water over 20m. Further advantages of the compact design of the spiral turbine are much lower construction ...
Manufactured by:CKD Blansko based inBlansko, CZECH REPUBLIC
Since 1904 CKD Blansko has manufactured more than 249 Francis turbines and they operate at 89 sites. Their total output amounts more than 5 334 MW. Francis turbines are delivered with high-quality self-lubricating bearings as standard. These bearings have higher specifications than the original bronze bearings and are moreover environmentally – friendly. Vertical as well as horizontal types ...
Manufactured by:Gilbert Gilkes & Gordon Ltd based inKendal, UNITED KINGDOM
The Francis turbine, developed by James B Francis in Lowell, Massachusetts in 1849 is the most common water turbine in use today. A wicket gate around the outside of the turbines rotating runner controls the rate of water flow through the turbine for different power production rates. ...
Manufactured by:Canadian Hydro Components Ltd. (CHC) based inAlmonte, ONTARIO (CANADA)
Francis turbines have been around for 170 years, and have more installations than any other type of turbine in the world today. Numerous designs offering variations in runner height, crown and band diameters, number of buckets, etc make Francis turbines a versatile option for a wide range of ...
Manufactured by:Suneco Micro Hydro Power based inDONGYING, Shandong, CHINA
Francis turbine is a reaction turbine，is the most common water turbine in use today. Applicable water head 30m~700m. Specific speed:50~300rpm. The largest capacity of our single Francis turbine unit is 6000KW. Head range up to more than 300 m. Capacity up to about 20 000 kW. Excellent peak efficiency. High efficiency also at partial water flow down to about 50%. Complete range of specific ...
Manufactured by:Chengdu Forster Technology Co., Ltd. based inChengdu, CHINA
Francis turbine has the advantages of compact structure, high efficiency and can adapt to a wide range of water head of turbine type. It is one of the widely used ar 20KW mini hydro turbine-generator ound the world; When the water flow through the turbine wheel, it enters to radial, axial flow, ...
Manufactured by:Dhavamani Technologies based inCoimbatore, INDIA
Our E.L.C is MicroController based, designed and tested for quick response for 1-400 kw Pico & micro hydro power plant. Its engineered for high accuracy and fitted with high quality electronic components. field proven, no maintenance,highly reliable. It is a electronic speed (RPM) governor of hydro turbine and ...